Results 1 to 10 of 10
Thread: clutch???
-
04-15-2009, 07:43 PM #1
clutch???
my clutch has been smoked a few times due to DR's that hooked harder than the clutch did... hahah... the pedal is gettin pretty soft too... any suggestions on whats decent???
-
04-15-2009, 11:36 PM #2
what are your mods on the car?
-
04-17-2009, 06:31 PM #3
I got a centerforce dual friction, got around 5000 miles on it, seems to work great on a bolt on car.
-
04-18-2009, 07:12 PM #4
If going with Spec. I would do the Stage 3.5. Forget the LS7. Some have had problems with the Spec series. Maybe look into reviews on Textrialla? I ahve the Spec and so far it works nicely.
-
04-19-2009, 10:56 AM #5
Mcleod, Textrailia, Ram, all have been proven to work well. I've read good things about the new Monster clutches also.
-
04-19-2009, 12:47 PM #6
If mine goes, which it probavbly will in the next few thousand miles, I will be looking into the Textrillia or Mcleod. I have not ever heard of the Monster series before. Are they new(er)?
-
04-22-2009, 01:49 AM #7
only mods i have are basic really.... lid, sfcs, tb bypass.... been savin a chunk and i'm gonna get full exhaust, tune and mabye some spray.... but i was leaning towards the centerforce clutch.... thanks for the input guys....
-
04-22-2009, 02:27 AM #8
- Join Date
- Aug 2005
- Location
- Columbia,SC
- Age
- 51
- Posts
- 511
Millienum Yellow- 2003 Corvette Z06
Monsterclutches STG 3--- there are a few GP's on some other boards for around $700... they are fairly new..alot of great reviews stg 3 very close to stock feel holds 700tq got one going to the Vette this week..have a few friends with them in and making more power then I and they are happy with it.. 1 yr warranty..
Last edited by MYSCZ06; 04-22-2009 at 02:30 AM.
Shawn
Daily: 2003 MY Z06 D1SC | Toy: 2006 Hayabusa Garrett T-3 | Hauler: 2007 Nissan Titan LE CC
I like being Blown!!
-
04-22-2009, 02:19 PM #9
-
04-30-2009, 01:47 PM #10
Have a textrialla in my ta. Worked well but I did burn it up after 20-22000 miles. Clutch feels great, light on the foot. Clutch was down to the rivots and still grabbing good. It did tend to glaze and chatter if you walked it too much. it's in or out , you can't mesh it like a stock clutch. A few hard launches and it cleaned up the glazing though.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New Disc Clutch System News - What's New In Clutch
By Ed Blown Vert in forum Almost Anything GoesReplies: 0Last Post: 04-27-2010, 05:44 AM -
Had Clutch slave cyl, clutch master cyl, and Clutch kit installed now I got problems
By 7camaro7 in forum Manual TransmissionReplies: 21Last Post: 12-13-2007, 07:41 PM -
Tranny, Clutch, or Clutch Hydraulic System?
By IZNUTHN in forum Manual TransmissionReplies: 2Last Post: 07-31-2007, 06:13 PM -
clutch locks up 1st gear in traffic while riding clutch
By Trixter in forum Manual TransmissionReplies: 9Last Post: 04-22-2007, 09:01 AM -
z06 clutch for sale, pressure plate clutch disk and flywheel
By themack56 in forum Parts For Sale / TradeReplies: 2Last Post: 07-06-2006, 07:15 PM
Bookmarks