Results 1 to 3 of 3
-
02-28-2006, 08:10 PM #1
- Join Date
- Aug 2005
- Location
- CO
- Posts
- 8
Please help!! SES light flashing!
I just got my car tested and a P0300 code came up. Does anyone know what that usually entails? I am kind of thinking the optispark, but I guess it could be spark plugs or wires too, although the plugs are pretty new. Also, it is idleing rough and I think it is running rich.
Last edited by BITCHIN96Z; 02-28-2006 at 08:21 PM.
-
02-28-2006, 09:30 PM #2
P0300 Code
The P0300 Code is an engine misfire code. how many miles you have on the plugs and wires? if you have changed them recently it could be that a wire is too close to the manifolds and may have melted the coating and is arcing. could be that simple or it could be that the opti is crapping out. If i were you i would start with plugs and wires at least make sure they are not damaged. Good Luck!
-
03-02-2006, 09:15 AM #3
- Join Date
- Aug 2005
- Location
- CO
- Posts
- 8
I replaced the plugs about 13,000 miles ago, but the wires are stock so about 75,000 miles. I don't see any arcing.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
security light flashing
By bbradberry in forum General HelpReplies: 6Last Post: 04-07-2011, 04:09 PM -
SES Light Flashing???
By SunsetZ in forum General HelpReplies: 19Last Post: 05-11-2009, 09:26 PM -
Help: SES Light flashing
By SS/CETA in forum General HelpReplies: 29Last Post: 10-25-2008, 02:33 PM -
SES light, flashing?
By 666ws6 in forum General HelpReplies: 22Last Post: 08-11-2008, 05:03 PM -
No flashing light on the H/U
By Danger731 in forum Stereo and ElectronicsReplies: 1Last Post: 05-04-2008, 05:35 AM
Bookmarks