Results 1 to 2 of 2
Thread: How to remove console
-
01-20-2009, 10:44 AM #1
- Join Date
- Feb 2008
- Location
- Milwaukee
- Posts
- 75
SOM- 2001 SOM WS6 408
How to remove console
I need to put a different shifter in as the car I bought had the hurst stick part cut.
-
01-20-2009, 04:59 PM #2
- Join Date
- Dec 2005
- Location
- Laurel, Maryland
- Posts
- 4,975
2000 Grand Prix GTP- 2000 Trans Am WS6 M6
1. Unscrew the Shifter Handle.
2. Remove the Shifter Boot...should be a plastic ring, just bend it a little and it will come off.
3. Unbolt the stick from the shifter.
4. Unscrew the two (7mm) bolts inside the console.
5. Pull the front part of the console back and out.
6. Unbolt the main console from the body...there are two screws (10mm) in the foot compartments (driver and front passenger), 1 under the cupholder and a few on the bottom of the console compartment. Take his out and placve in the back seat.
7. Unscrew the rubber boot from around the shifter. Should be 7mm screws.
8. Unbolt the Shifter from the Transmission. There are 4 bolts, I think they are 14 or 15mm in size.
To reassemble just reverse the above.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: How to remove center console.
By Whitefish in forum General HelpReplies: 7Last Post: 06-14-2012, 06:51 AM -
Question: Overhead console // airplane console??
By NeeD4SpeeD in forum Appearance SectionReplies: 15Last Post: 10-06-2010, 10:18 AM -
C3 Corvette Console Repair - Please Console Me
By Ed Blown Vert in forum CorvetteReplies: 0Last Post: 08-29-2009, 02:40 AM -
How Do You Remove The Shifter Boot Without Removing Console On An M6 '99 T/a?
By ggoat!!! in forum Firebird / WS6Replies: 2Last Post: 07-15-2007, 10:15 PM -
WTB: Black Shifter Console (complete console)
By Stroked-Z in forum Parts Wanted / TradeReplies: 0Last Post: 11-08-2006, 02:10 PM
Bookmarks