Results 1 to 12 of 12
Thread: Mod Build Sheet
-
02-15-2006, 11:42 AM #1
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Mod Build Sheet
Had a few request for a build sheet...so I thought I'd knock one out and just post it...this by no means is the complete mod list...but a inventory of the major componenets....some of you have asked for the cost of the complete engine build...not just the spinner assembly...I know what it is cuz I just paid the bill
Here goes....
2004 GTO Black A4
Delivered weight 3868 lbs.
346 CID LS1
RWHP 289
RWTQ 292
Present weight 3227 lbs.
402 LS6 Forged Internals Stroker Motor Nitrous Express Wet Kit
Numbers to be finalized shortly
RWHP (NA) 561
RWTQ (NA) 604
RWHP 150 Shot 720
RWTQ 150 Shot 750
402 Stroker Motor Components (Cost approximately $6500 w/custom machining etc.)
LQ9 Iron Block
Forged Balanced Eagle Crank
Mahle Pistons/Rings
Lunati Forged Rods
ARP Rod Bolts
Double Roller Timing Chain
SLP Underdrive Pulley
LS6 Ported High Flow Oil Pump
Comp Cam 238/242, .602 lift on a 114
Patriot LS2 Heads 64cc Chambers flow @ 330 cfm @.640 lift
Patriot Gold dual valve springs .650 lift
Titanium Retainers
ARP Head Bolts
Perma-Cool Remote Dual Oil Filters
Perma-Cool Oil Cooler
Shaner S3 Throttle Body
LSX Fast Intake
KN CAI
160* Tstat
Royal Purple Racing 41 Motor Oil w/ dual AC/Delco filters
Transmission 4L60E
TG Shift Kit
3500 Stall from Precision Industries
B&M Trannie Cooler
B&M Spin on Transmission filter
14 Quarts Amsoil Synthetic ATF
Driveline Components
3 ½” Extreme Performance Aluminum Driveshaft
Harrop Rear Diff Cover
SLP Poly Bushings
Koni Adjustable Shocks
Pedder Drag Springs
Nitto Drag Radials
Exhaust
Stainless Works Long Tube Headers
Gutted RT Cats
DynoMax 3” Tubes
Borla ExhaustLast edited by Sarge; 02-16-2006 at 03:53 AM.
-
02-15-2006, 12:23 PM #2
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 48
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
Damn Sarge that is a nice list of goodies.
-
02-15-2006, 01:36 PM #3BlueEyedDevil141Guest
Sarge, did you get the tranny like bullet proofed or anything, or does it handle that power fine the way it came?
-
02-15-2006, 01:54 PM #4
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 48
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
I think he had it built.
-
02-15-2006, 02:07 PM #5sonnyredGuest
What did you do to eliminate 641 lbs?
-
02-15-2006, 03:21 PM #6txcosmosGuest
Hey Sarge, what exactly does the shift kit do? I thought everything could be tweaked through tuning?
-
02-15-2006, 03:26 PM #7BlueEyedDevil141Guest
The shift kit changes the valve body components, making for stronger, harder, and quicker shifts.
-
02-16-2006, 02:17 AM #8
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Weight loss was a PITA but then again not all that big of a deal...
Steel hood and fenders were replaced with fiberglass...trunk stripped....the biggie was all the frame "bracing" was replaced with tubular steel...lightweight and stronger.....then of course the normal crap...skidplate...intake...exhaust manifold...driveshaft....etc.etc....all the performance parts weighed less....now of course when my big ass sits down the car weighs 7000lbsThe guys went through the frame and stripped all kinds of little bullshit braces/flanges and crap and had a pile of worthless heavy shit at the end of the day....if you crawl under your car and just look...take a beer with you...just start looking....bunch of crap you dont need...
The trannie...all the valve body's were upgraded to a much more robust setup...snap your neck shifting resulted....
-
02-21-2006, 08:37 AM #9
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 48
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
Damn that is one bad bitch. Can't wait to see some new numbers.
-
02-23-2006, 09:59 AM #10
Fantastic Sarge, I'm still budgeting for my 383 Stroker and eventual Nitrous
-
02-23-2006, 01:53 PM #11sonnyredGuest
Originally Posted by Sarge
-
02-23-2006, 02:04 PM #12
- Join Date
- Aug 2005
- Location
- cleveland ohio
- Posts
- 11,373
trans am 00 ws6- 1998 camaro ss vert
i think you could do better on that build.
j/k nice looking set up.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Build sheet?
By lownloud99 in forum Firebird / WS6Replies: 3Last Post: 01-03-2014, 12:23 PM -
Build Sheet
By HUNTNFISH in forum Firebird / WS6Replies: 26Last Post: 06-27-2009, 10:50 AM -
My Build Sheet.
By speedracer25f in forum Firebird / WS6Replies: 2Last Post: 11-05-2007, 01:41 PM -
LS1 Build Sheet
By tbirdsc44 in forum General HelpReplies: 2Last Post: 03-19-2006, 06:15 PM -
Build Sheet?
By ws4transam in forum GTOReplies: 4Last Post: 02-11-2006, 12:27 PM
Bookmarks