Results 1 to 9 of 9
-
07-24-2008, 10:22 AM #1
- Join Date
- Oct 2007
- Location
- CANFIELD, OHIO
- Age
- 38
- Posts
- 652
PEWETER METALIC- 2002 CAMARO Z-28 M-6
Need help choosing Long Tube Headers and YPipe
Ok so Ive settled on what cat back Im going with. I have decieded to go with the Texas speed Rumbler cat back(non x pipe version) with the magnaflow tips.
http://www.texas-speed.com/shop/item...d=195&catid=46
. Please give me advice. I need a header that will be able to stand up to occasional winter driving yet look good and last a long time and give performance! P.S. I want a Catted y pipe to keep it toned down a bit!
However Im at a loss as to what header to use! Below are some links to the setups I've been Eyeing. Thanks guys!
Texas Speed
Headers
http://www.texas-speed.com/shop/item...d=899&catid=45
y pipe
http://www.texas-speed.com/shop/item...d=189&catid=45
Kooks header
http://www.texas-speed.com/shop/item...d=664&catid=45
with this y pipe
http://www.texas-speed.com/shop/item...d=189&catid=45
Or this SLP set up though I heard They were Redesigned with more clearance now supposedly
http://www.lmperformance.com/24191/1.html
Im also looking at these but I've never heard of them before!
http://www.lmperformance.com/19831/1.html
-
07-24-2008, 10:23 AM #2
- Join Date
- Oct 2007
- Location
- CANFIELD, OHIO
- Age
- 38
- Posts
- 652
PEWETER METALIC- 2002 CAMARO Z-28 M-6
Also I will be getting a tune done after this!
-
07-24-2008, 11:10 AM #3
- Join Date
- Mar 2007
- Location
- Minnesota
- Age
- 42
- Posts
- 596
83 Z28 new project- 98 Formula WS7-sold:(
Kooks and pacesetter make great headers. Get at least ceramic or stainless if you have the extra money. They will hold up ok for winter weather.
-
07-24-2008, 03:05 PM #4
- Join Date
- Oct 2007
- Location
- CANFIELD, OHIO
- Age
- 38
- Posts
- 652
PEWETER METALIC- 2002 CAMARO Z-28 M-6
yea Im leaning towards the kooks setup due to being stainless but we will see!
Any other opinions
-
07-26-2008, 10:11 AM #5
- Join Date
- Oct 2007
- Location
- CANFIELD, OHIO
- Age
- 38
- Posts
- 652
PEWETER METALIC- 2002 CAMARO Z-28 M-6
Here is the setup I decided on
Kooks header
Texas speed and performance Catted Y pipe
Texas speed and performance cat back rumbler exhaust
What do you guys think?
-
07-26-2008, 10:14 AM #6
get it sounds like a great setup to go with
-
07-26-2008, 01:10 PM #7
- Join Date
- Oct 2007
- Location
- CANFIELD, OHIO
- Age
- 38
- Posts
- 652
PEWETER METALIC- 2002 CAMARO Z-28 M-6
Yea I figure if i got the spare money I might as well do it right the first time!
Its only money right, not like you can take it when u die lol
-
07-26-2008, 04:40 PM #8
- Join Date
- Dec 2002
- Location
- n/w chicago
- Age
- 54
- Posts
- 6,932
black- 2000 nhra edition formula
ive had pacesetters for 4 years now and could not be more happy.
im not a huge fan of stainless simply because of the cost.
with the cost savings of coated pacesetters, a person can get another mod.
its not like coated headers will rust threw anytime soon.2000 nhra edition formula
a few bolt ons, 379 rwhp
11.96 @113.25
-
07-27-2008, 04:29 AM #9
Jet Hot Headers and Jet Hot ORY, they fit good and have no clearance issues.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BBK Long-Tube Headers Install - Going Long
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 09-09-2011, 06:30 PM -
Headers, Long tube vs Mid tube
By hix5000 in forum External EngineReplies: 11Last Post: 05-04-2008, 07:48 AM -
Choosing headers...How much does primary tube size matter?
By RidinDirty in forum External EngineReplies: 5Last Post: 05-12-2007, 12:41 PM -
Long Tube Headers
By AFix03 in forum External EngineReplies: 29Last Post: 10-24-2006, 11:22 AM
Bookmarks