Results 1 to 2 of 2
Thread: turn signals don't work
-
05-29-2008, 03:01 PM #1
turn signals don't work
For some reason my turn signals aren't working. The arrows don't light up on the dash and the tail lights don't do anything. all the lights are fine. i noticed my turn signals were blinking very slow for a while. I checked every damn fuse on the car and they look good and are the right "ampage".
is there anything else i can do?
-
05-29-2008, 03:21 PM #2
- Join Date
- Jun 2006
- Location
- USA
- Age
- 44
- Posts
- 202
- 2001 WS6, 2003 SRT4(sold)
Pull your turn signal bulbs and clean off all corrosion buildup. I recommend using PB Blaster, but if you don't have any, simply wiping them off will help. Put them back in and see if anything changes. If they work, take them back out once more and slather up the connecting pieces with dieletric grease. Replace again. You should be set for a while.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
turn signals don't work
By GottaHaveLS1 in forum Stereo and ElectronicsReplies: 11Last Post: 04-01-2014, 04:03 PM -
help ....my turn signals dont work
By Speedy_Gonzales in forum General HelpReplies: 19Last Post: 03-21-2010, 08:15 AM -
Turn signals and brake lights don't quite work..HELP!!
By Kaution vBi in forum General HelpReplies: 1Last Post: 08-05-2007, 09:45 AM -
Turn signals wont work but hazards do??
By Toneloc71sr in forum General HelpReplies: 5Last Post: 05-31-2007, 12:48 AM -
Help with my Turn Signals
By mustngdave in forum General HelpReplies: 3Last Post: 05-05-2007, 10:49 PM
Bookmarks