Results 1 to 6 of 6
Thread: duplicolor ceramic high heat
-
03-12-2008, 02:38 PM #1
- Join Date
- Oct 2007
- Location
- hixson tennessee
- Age
- 34
- Posts
- 1,641
white- 94 camaro z28
duplicolor ceramic high heat
is a blessing from god. I put 4 coats of it on my headers and have been baking them today and such (while on the clock at work. lol) and when I was testing them with the radiating oven the internal temps of the header were 170degrees when the outside was 255. that was amazing to me. that beats out almost any regular ceramic coating. (note: I did bake them for 1 hour at 450 degrees in an industrial oven for baking the paint on) the test I did to get those numbers was 20 mins in the radiating oven (primarily used for melting plastic to specific heat) and the used the laser temp thingy( can't remember the name of it but year) and shot it inside them and outside and got those numbers. after 20 mins it should have been the same all the way through if not interfered with on regular uncoated header. and I'm going to test the other one before and after baking as I'm waiting on the test on the other right now( 10 mins)
-
03-14-2008, 05:34 AM #2
It is a good product and holds up well against the elements.
J2001 SS, Its not the car its the Driver that matters....
-
03-14-2008, 05:49 PM #3
-
03-16-2008, 11:24 PM #4
- Join Date
- Oct 2007
- Location
- hixson tennessee
- Age
- 34
- Posts
- 1,641
white- 94 camaro z28
ill post pics tomorrow. they are on the car right now. my cell was dead when i tested them with the oven so I wasn't able to get pics of that. I really wanted to but didn't have battery. I'll post pics of them on the car though. I already put 500miles on them in the z28 and they are standing up nicely to the abuse
-
03-17-2008, 06:21 PM #5
mine held up nicely as well prolly 5 months or more and then they started to flake off but the paint never sat in a oven to bake on, just painted em and put em on
-
03-17-2008, 07:05 PM #6
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ceramic tile installation, does this seem high?
By Detroit Power in forum Almost Anything GoesReplies: 17Last Post: 06-04-2009, 11:33 AM -
VHT High Temp Paint vs a Ceramic Coating Job?
By Pyromaniacal in forum External EngineReplies: 3Last Post: 12-07-2007, 03:08 PM
Bookmarks