Results 1 to 15 of 15
-
02-17-2008, 09:16 AM #1
where is the best place to get a 9 inch?
hey everyone, i really want to get a new rearend. i am leaning to the moser 9inch prolly 35 splined with either 4.11 or 4.30's. prolly 4.30's question is where is the best deal? i only found yearone has the whole setup and is a lil over 3 grand, any suggestions? thanks a million
2002 Z28 M6, Suncoast Creations ram air, port/polish TB w/ bypass and bumpstop, heater hose mod, stainless steel long tubes, ORY w/ dual cutouts, Magnaflow, BMR SFC, UMI Torque Arm, LS7 clutch w/ drill mod, Pro 5.0 w/ Lous short stick, MSD wires, 4.10s, good maintenancehttp://www.fquick.com/blue02z
-
02-17-2008, 09:23 AM #2
- Join Date
- Jun 2007
- Location
- Lathrop, Missouri
- Posts
- 2,482
NBM / Silver- 00 SS / 71 SS Elcamino
I bought mine here http://stores.ebay.com/Quick-Performance-Racing.
I got a Moser 9" with 35 spline axles, drain and fill plug, reluctor rings installed, Strange Pro Nodular third member with Motive performance 4.30 gears and a detroit locker. Shipped to my door in 5 business days and I paid $2550 total price (shipping included). + the gears were set right and they don't whine. I highly recomend them.2000 SS Camaro Heads, Large cam, Fast 90, 9"w/430's and locker, yada yada yada... you get the picture
1971 SS ElCamino 402 Big Block 550HP
2006 Silverado 2500HD 496 cubic inches of pure muscle
-
02-17-2008, 09:34 AM #3
- Join Date
- Dec 2006
- Location
- Parkton MD
- Age
- 60
- Posts
- 138
NBM- 2002 Z28
Try Eric at Mid West Chassis.
-
02-17-2008, 09:40 AM #4
hey thanks Jay!!! how do you like the 4.30s? what is the rpm at 80 or so? thanks a million guys!!!!!!!!!!!!!!!!!!!!!
-
02-17-2008, 09:44 AM #5
- Join Date
- Jun 2007
- Location
- Lathrop, Missouri
- Posts
- 2,482
NBM / Silver- 00 SS / 71 SS Elcamino
Absolutely love the 4.30's. 75 MPH in sixth I am at 2150 RPM with 295/35/18's in the rear. Going to have to do some trial and error at the track to see what size tires I'll need with my new H&C combo. I might need a 28" tire but I'm not sure. I love the gears on the street however.
-
02-17-2008, 09:47 AM #6
cool! i will def. go with 4.30s then. thanks for the help and glad to see you got your h/c
-
02-17-2008, 09:54 AM #7
-
02-17-2008, 09:55 AM #8
-
02-29-2008, 03:06 PM #9
- Join Date
- Oct 2007
- Location
- Sacramento
- Posts
- 6
how much is labor to install a new rear end?
-
02-29-2008, 05:09 PM #10
- Join Date
- Mar 2006
- Location
- West Virginia
- Age
- 44
- Posts
- 763
Pewter- Y2K WS6
Ford 8:8 Rear Swap
I have heard of people doing this before How much more power will a stock mustang take... and what all is changed?
I'm new to this part of a trans am just buying one actually and am curious.
-
03-01-2008, 06:39 AM #11
-
03-01-2008, 11:09 AM #12
- Join Date
- Aug 2005
- Location
- Billings,MT
- Posts
- 428
Sunset Orange Metalic- 2002 Firehawk
I got mine from Bob at Epp.Best money spent for any questions I had.
-
03-05-2008, 07:07 AM #13
- Join Date
- Feb 2008
- Location
- york pa
- Posts
- 125
white- 96 ws6
quickperformance.com sells bolt in assemblies for f-bodys that come with fluch mount ends that accept stock brakes and rotors and built to order center sections. I got everything i needed for $1539.00 thats including shipping u just need 2 3in exhaust clamps for ur rear sway bar and u need to install the axles and brakes urself. There a lot cheaper than any place i seen and im happy with it. You need to paint the rear to but at least u can choose the color
-
03-05-2008, 05:23 PM #14
Remember, 35 spline limits you to a locker or spool.I'm pretty sure anyway.
-
03-05-2008, 07:05 PM #15
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
old 9 inch?
By steve00ss in forum DrivetrainReplies: 14Last Post: 07-19-2012, 05:27 PM -
Question: decent looking 16 inch rim
By ls1ws6ben in forum Wheels and TiresReplies: 3Last Post: 06-27-2011, 02:37 AM -
Wanted: 39's or bigger for 16.5 inch rim
By Y2K_CAMARO in forum Parts Wanted / TradeReplies: 8Last Post: 03-14-2010, 09:17 AM -
400 + Inch Ls2
By O-YES-NOS in forum Parts Wanted / TradeReplies: 0Last Post: 05-23-2006, 04:55 AM -
3 inch Y-Pipe with 3 inch cutout already welded onto it
By Hurley711 in forum Parts For Sale / TradeReplies: 8Last Post: 10-02-2005, 09:59 AM
Bookmarks