Texas Mini Train March

[Mr. Luos]

ABS?? Whats that?

[Bottesini]

972-434-2151 in case you do needto call them... i got them on speed dial

To bad you just go there to hang out and don't get any work done

[BULLET_WS6]

myself

oh you are installing yourself? mmk... well then talk to curtis... no one else on here that i know of has done it themselves... according to him it aint that hard... with the riht tools it can be done in a few hours

[BULLET_WS6]

To bad you just go there to hang out and don't get any work done

nothing wrong with that...

[BULLET_WS6]

ABS?? Whats that?

[Mr. Luos]

I don't need it to stop.

[Bottesini]

oh you are installing yourself? mmk... well then talk to curtis... no one else on here that i know of has done it themselves... according to him it aint that hard... with the riht tools it can be done in a few hours

Should not be a little time consuming and your probably want some help, but I know there are good write ups for it and it is not that bad.

[Mr. Luos]

I am currently in the process of taking mine out.

Needs cleaned up, a new axle bearing, and fresh fluid.
An extra set of hands is a must. Balancing the damn thing is a PITA.

[BULLET_WS6]

Should not be a little time consuming and your probably want some help, but I know there are good write ups for it and it is not that bad.

if you were really good a master tech at a dealer on average can do a rear swap in 30 minutes yet somehow it would take me no less than 3 hours...
darn master techs

[BULLET_WS6]

I am currently in the process of taking mine out.

Needs cleaned up, a new axle bearing, and fresh fluid.
An extra set of hands is a must. Balancing the damn thing is a PITA.

how long would you say it takes to do.. and whats the difficulty level

[Mr. Luos]

If you can turn a wrench, you can do it.
Just have to be patient. Plan 5 hours...just in case.

I already have my driveshaft and shocks disconnected, but I still don't think it will take me more than 45 minutes to have it out.

[BULLET_WS6]

If you can turn a wrench, you can do it.
Just have to be patient. Plan 5 hours...just in case.

I already have my driveshaft and shocks disconnected, but I still don't think it will take me more than 45 minutes to have it out.

yeah i would say with a good write up, three hours your first time... my guess... but if i put one in chances are i'd pay to get it done withthe situation im in now

[Bottesini]

if you were really good a master tech at a dealer on average can do a rear swap in 30 minutes yet somehow it would take me no less than 3 hours...
darn master techs

I think that I would rather change the rear end then change plugs. Just so much easier for me to work when I have more space. I would still plan an entire Saturday for the install, just to be safe.

[BULLET_WS6]

for the second time in the past few days i watched a mustang gt with exhaust drive around revving up being loud outside my room... cant wait to leave at the same time he his and shut him up... put him in his place by showing him how slow his car is

[Bottesini]

for the second time in the past few days i watched a mustang gt with exhaust drive around revving up being loud outside my room... cant wait to leave at the same time he his and shut him up... put him in his place by showing him how slow his car is

Wonder if that is the same car I have been hearing around my place lately.

[Mr. Luos]

If you dodge a wrench....

[BULLET_WS6]

I think that I would rather change the rear end then change plugs. Just so much easier for me to work when I have more space. I would still plan an entire Saturday for the install, just to be safe.

for sure... and a case

[BULLET_WS6]

Wonder if that is the same car I have been hearing around my place lately.

silver peice of poo

[2000 SS Beast]

what about axle bearings? Where can I FET them pressed

[Bottesini]

silver peice of poo

I have not gone outside to see what it is just hear it sometimes. Who knows what it is, maybe one day when I need to burn some gas I will stalk around the neighborhood some