what type of exhaust do you have thread

**2fast2blegal** · 02-04-2008, 04:41 PM

ive seen those before but it was on a S281 Saleen. do you have any pics from the outside?

**blue02Z** · 02-04-2008, 04:43 PM

i have LT headers with dual cutouts into 3 inch with no cats into a polished magnalfow muffler with magnaflow polished tips

**1998_trans_am_ls1** · 02-04-2008, 04:43 PM

i will get one hold up do you want the pic of both tips or just one

**dkrowner** · 02-04-2008, 04:49 PM

magnaflows

**2fast2blegal** · 02-04-2008, 04:52 PM

Originally Posted by SScamaro1999

i will get one hold up do you want the pic of both tips or just one

Take a few pics of the tips and the connecting and any words that might be on it

**1998_trans_am_ls1** · 02-04-2008, 04:56 PM

i could not find words before there might be some that i missed but i will look tommorow i could not get pics connected i will tommorow i will post the pics i could get. i doubt it will help but i will try to get better pics tommorow the pics i got will be on in like 5 mins

**1998_trans_am_ls1** · 02-04-2008, 05:19 PM

heres the exhaust tips what are they? idk if thes pics will help any let me know

**1998_trans_am_ls1** · 02-04-2008, 05:38 PM

does any one know

**2fast2blegal** · 02-04-2008, 05:39 PM

hmmmmmm idk wtf that is. what kind of setup is on the car ???

**1998_trans_am_ls1** · 02-04-2008, 05:44 PM

it is Flowmaster american thunder with those tips everyone i have talked to dont know what they are

**MattB75** · 02-04-2008, 07:07 PM

Right now I have a 2 3/4 in magnaflow system, but I just got the flowmaster american thunder 3 in system and hope to get it on in the next couple of weeks. I don't have any headers, but I do want to replace the left pipe that is "squeezed-to fit" with a regular round 3 in pipe. Has anyone done that, and is there a clearance issue? Thanks.

**Firebirdjones** · 02-05-2008, 03:35 AM

Originally Posted by MattB75

Right now I have a 2 3/4 in magnaflow system, but I just got the flowmaster american thunder 3 in system and hope to get it on in the next couple of weeks. I don't have any headers, but I do want to replace the left pipe that is "squeezed-to fit" with a regular round 3 in pipe. Has anyone done that, and is there a clearance issue? Thanks.

I would assume you are talking about the driverside part of the Y-pipe.

Probably 3 ways to go about that. SLP makes a new Y-pipe that bolts to the factory exhaust manifolds that eliminates that flat section,,,and it's made of 2 1/2 inch pipe,,,,,just a heads up,,,there is no performance improvements,,,I tried it,,,and got nothing.

You could have an exhaust shop cut that section off and bend/weld a new piece in,,,,probably your cheapest way to go.

You could wait and go with some longtube headers and off road Y-pipe. If emissions aren't a concern and longtube headers are in the future for you,,,I would suggest this route, the headers will give you a little boost in HP and you get rid of the Y-pipe all in one shot.

Yes it does cause some clearance issues,,,,it's flat for a reason. With a round pipe it will have to hang a little lower, and may or may not be more visable from the side of the car. Hope that helps.

**ss~zoso~ss** · 02-05-2008, 04:18 AM

ive got a flowmaster 40 series with ORY, and Pacesetter LT's, nice grumble at idle and cruise speeds , then ear shattering at WOT

**cabel** · 02-05-2008, 04:41 AM

I have true dual 3" X dumped with Edelbrock mufflers

**BlackLT1Z28** · 02-05-2008, 05:02 AM

I have pacesetter LT's, ORY, and some sort of Flowmaster catback that came with the car.

**andrew69_04** · 02-05-2008, 05:35 AM

i've had flowmaster american thunder, spintech, magnaflow, loudmouth, magnamouth, and the stock ws6 exhaust. magnaflow is nice with the lt's and ory. Im not big on the super loud so you cant hear anything when driving.