(REQUEST) Pic of stock CETA exhaust tips

[SS/CETA]

I'm curious to see if my exhaust is stock because the car doesn't sound like any other T/A I've heard. I have the dual tips that are similar to Corsa tips, but they're actually angled i.e. one looks longer than the other. I was blessed with the car, but the person that had it before me never did any work to it. The original purchaser was a gear head and I suspect that he put a cam and exhaust in the car before selling it.

[basballny2]

look under neath the car, most aftermarket exhausts have the brand on the mufflers

[SS/CETA]

I just did, but there's no tramp stamp on the cat-back. I can tell you that it's most definately 3+ inch exhaust, though.

[third_shift|studios]

take pix. the CETA exhaust is just like a stock ws.6's. Single polished outlets in each side

[basballny2]

i believe, dont quote me on this, but i believe the CETA's had the same exact exhaust as all the other TA's, the 2.5 inch single tips

[basballny2]

haha TSS just beat me to it

[SS/CETA]

I'll be back in just a few. Let me snap off a few shots and hopefully my ISP won't shit on me in the process of uploading.

[SS/CETA]

Ok, I took close-up pics of the exhaust system, but my ISP isn't moving fast enough for me to upload them to my photobucket. I can tell you that one tip is angled maybe a half inch off of the other one and it appears to be a full 3" system. I'll have to post my pics after 2am, since I've used up my "fair access policy" for the day. Folks, don't get satellite internet.


*EDIT Photobucket came through for me.



I'll apply the pics as they upload.

[third_shift|studios]

Ok, I took close-up pics of the exhaust system, but my ISP isn't moving fast enough for me to upload them to my photobucket. I can tell you that one tip is angled maybe a half inch off of the other one and it appears to be a full 3" system. I'll have to post my pics after 2am, since I've used up my "fair access policy" for the day. Folks, don't get satellite internet.


*EDIT Photobucket came through for me.



I'll apply the pics as they upload.

probably corsa-clones on a different catback. my corsa's have the name etched on the top of the tips

[SS/CETA]

[basballny2]

thats not stock

[96Firebirdformula]

Here stock.

muffler its probably on top of it were you can't see the name of muffler my magnaflow like that name is on other side it's not pointed to ground

[basballny2]

could be a custom job, u said theres a cam in there as well? probably has headers also

[SS/CETA]

Here stock.

muffler its probably on top of it were you can't see the name of muffler my magnaflow like that name is on other side it's not pointed to ground

Yeah, I think that's the way mine is, too. There's nothing noticeable pointing towards the ground.

could be a custom job, u said theres a cam in there as well? probably has headers also

I'm beginning to think so, yeah. The car is not smooth @ idle. It lopes ever so slightly. The 3" piping runs all the way to the front of the car. I'll check to see if the headers are different. Are there any noticeable points on stock manifolds?

[SS/CETA]

The car has a a set of shorty headers non-ceramacoated and the pipe runs into a resonator or pre-cat and then into the 3" system.

[02cetransam]

take so more pics of the car under the hood and such to see if any other mods were done that you arent aware of. Please post em!!

[SS/CETA]

Ok I appreciate the help in advance. I'm an LT1 guy, so the LS1 is completely foreign to me. I'll post pics when I can. It may be a couple of days because I'm waiting on my ISP to patch itself up.

*EDIT I actually posted a pic of my engine bay in the "show us your engine bay" thread.


Here's the link:

http://www.ls1.com/forums/showthread...51#post1206651

[basballny2]

get ride of the shorties, get some LT's in there

[SS/CETA]

LT = Long Tube, correct?

[basballny2]

ya, some shorties actually dyno less than stock