Results 1 to 1 of 1
Thread: Lc9 in place of lh6
-
04-12-2024, 06:04 PM #1
- Join Date
- Apr 2024
- Location
- Ontario
- Posts
- 2
Blue- 2009
Lc9 in place of lh6
So I have a 2008 avalanche donor truck with a Lc9 in it. My 2009 Silverado LH6 has the dod/afm delete with a cam, ls7 lifters, pushrods, valve springs. I thought a lifter or the cam failed recently getting a weird squeak at idle then around 2000 rpm it started to sound like metal on metal. I pulled the heads off expecting to find a damaged lifter and cam. All lifters look fine and cam looks fine from what I can see through lifter holes. Realizing that wasn?t the issue I?m stuck on what to check next. If it is bottom end I have a lc9 like I said above that I could put in with all of the goodies from the motor that is ?pooched?. Is there any reason I cannot swap the lh6 out with the lc9, or does anyone know what I should inspect next before swapping motors. TIA.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: 2007 GMC Envoy LH6 5.3L *Exhaust*
By Cirenitram in forum General HelpReplies: 0Last Post: 02-07-2021, 07:53 PM -
LC9 or PF9?
By INMY01TA in forum Gun's & AmmoReplies: 2Last Post: 09-20-2011, 04:59 PM -
Not my place or not my right?
By camarojunky74 in forum Camaro / SSReplies: 117Last Post: 03-25-2009, 07:13 PM -
not even sure I'm asking in the right place...
By DrMilhouse in forum General HelpReplies: 1Last Post: 05-29-2006, 06:17 AM -
We have our own little place
By 12secondv6 in forum V6Replies: 11Last Post: 08-30-2005, 10:24 PM
Bookmarks