Results 6,801 to 6,820 of 7122
-
04-21-2020, 07:14 AM #6801
Certainly.
Depo is an aftermarket company that makes replacement light housings for vehicles. They to my knowledge are the only ones who make replacement blinker housings for the Trans Ams. But CarID, Amazon, and Ebay have listings for these light housings.
https://www.carid.com/1998-pontiac-f...-80117444.html
Firebirds have a round housing while Trans Am have our more unique shaped housing for the bumper. So be sure you are ordering Trans Am housings.2000 Trans Am WS.6 M6
SLP lid & bellow w/ K&N, GMMG catback w/ Corsa Clones, UMI SFC, UMI Adj. Panhard, UMI Adj. TQ arm w/ relocation kit, QTP Longtube headers ORY, LS6 intake, EGR/A.I.R delete.
Eibach prokit, Bilstein HDs, Nitto NT555s, skip shift elim, whiteface overlays, 20% tint, matte black decal/overlays
YouTube.com/DarrenWS6
-
04-21-2020, 08:52 AM #6802Ported/Polished throttle body, Lingenfelter launch module, SLP line lock, QTP exhaust cutout, LS7 clutch, K&N, Ceramic coated longtubes, no cats, 3" exhaust, Flowmaster "B", Eibach springs, Midwest Chassis 9" rearend w/4.10's
-
04-21-2020, 09:41 AM #6803
- Join Date
- Mar 2007
- Location
- Henryetta/Tulsa Oklahoma
- Age
- 40
- Posts
- 3,675
2016 Camaro SS - Summit- 2001 Trans Am WS6 - NBM
Jump started due to not being moved in 3 weeks. Changed the oil. Found a small coolant leak from the plastic end of the radiator. I feel like I'm living Groundhog Day with this car's issues vs my old SS. Same sh!t, different VIN.
2016 Summit White 1SS - The DD - Mishimoto catch can, Solo axleback & secondary cat delete, LED sidemarkers & reverse lights, head/taillight blackout, RCC custom badges
2001 NBM Trans Am WS6 - Torquer V2 cam, Yank 3000 stall, Transgo kit, Racetronix fuel pump, TSP LTs, Magnaflow catback, Strano Springs/Koni STR.T shocks, 17x9.5/17x11 TTII's
2000 Arctic White SS #1667 - Sold
-
04-21-2020, 10:56 AM #6804
Hey Terry, I too found a leak in my plastic ended radiator. I thought I would keep it from happening again, by purchasing an all aluminum radiator. It has all aluminum construction with a heavy duty 2-row core with 1.0" tubes. The radiator looks really nice with polished aluminum ends and haven't experienced any negative results. However, installation was a BEAR!!! The radiator was a different size than the OEM radiator, even though the company assured that it would fit '98-'02 Pontiac Firebird TransAms. If you decide to go with all aluminum, be ready to do a lot of "massaging" to get it in....
-
04-22-2020, 06:03 AM #6805
- Join Date
- Mar 2007
- Location
- Henryetta/Tulsa Oklahoma
- Age
- 40
- Posts
- 3,675
2016 Camaro SS - Summit- 2001 Trans Am WS6 - NBM
Good to know, because I was in fact researching all aluminum radiators
Thanks for the heads-up.
-
04-22-2020, 07:15 AM #6806
-
04-22-2020, 11:31 AM #6807
-
04-23-2020, 02:38 PM #6808
Purchased 8 ACDelco Iridium spark plugs from RockAuto for $45, and got a spark plug rebate from ACDelco for $24. Total, the plugs cost me $21. Can't beat that with a stick!!!
-
04-26-2020, 10:17 AM #6809
Very good deal!
I went with the NGK Tr-55s. Hope they last awhile. Doesn't look like a fun plug job haha. I put the improper AcDelco iridium plugs in my 04 Silverado, made it 28k mi until I was getting random misfires. The electrodes on #7 & #5 were almost all gone lol. I just recently replaced them with NGK TR5IX iridiums which seem to be all the rage. Ran awesome, shortly after my pass. cat broke apart so I put longtube headers on it with an ORY. Runs even better now and I average 14mpg now. Always got 11/12 with it. Guess them cats were shot lol!
My WS6 runs amazing compared to what it was with lid & catback. The plugs, LS6 intake, longtubes, ORY, egr delete, and dyno tune. 360rwhp. Had the Tr-55s put in while apart. Did the MSD 8.5mm wires just for updating old wires, and for some pzazz haha!
-
04-27-2020, 08:49 AM #6810
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
Friday gave the TA a much needed bath and then the wife and I went for a cruise on several back roads with winding turns and several nice straight a ways to open it up.
Picked up a goal find at the junk yard...a fully functional power antenna. That went on the TA and a spare tire for my daughters car. I also found the leak on her ac system, it was missing a gasket on the compressor. And I also installed my sway bar from my TA to her car. The V6 sway bar measure 27mm while the TA stock one measure 30mm and felt a little more heavier. At the minimum she has a little more stiffness on front body roll. The vert is benefiting from the hand me downs from the TA that are still good, but better then the V6 parts.
-
04-28-2020, 09:55 AM #6811
Went for a cruise
Sent from my iPhone using Tapatalk02 Black Trans Am Firehawk #1079.Lots bolt ons, NOS
Just one nasty chicken!!!!!
-
05-06-2020, 01:34 PM #6812
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
Found the source of my pain for the last month with the vert giving me the Reduce Power code.
The egr tube somehow got crushed causing a massive vacuum leak (thanks Carpy in troubleshooting), either it was this or the MAF sensor I replaced.
-
05-06-2020, 03:57 PM #6813
Yowza! That doesn't look good.
-
05-07-2020, 05:47 AM #6814
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
Got lucky and found one at a junk yard.
-
05-09-2020, 04:02 AM #6815
I miss my junkyard days. A happy Saturday was walking into the local salvage yard with tool box in hand to go scrounge parts for whatever I happened to be working on at the time.
-
05-12-2020, 06:08 AM #6816
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I'm finding that the Cash for Clunkers program really fwak up the junk yards in inventory. Pickings are getting scarce on f bodies......
The one that is in the yard right now kinda pisses me off. It's a hard top V6. I would love to have a hard top to make it into a track car. But once they're in the yard you can't buy them.
-
05-12-2020, 12:13 PM #6817
- Join Date
- Mar 2007
- Location
- Henryetta/Tulsa Oklahoma
- Age
- 40
- Posts
- 3,675
2016 Camaro SS - Summit- 2001 Trans Am WS6 - NBM
Scott, if things start looking really scarce and you can't find something you need, you should hit up American Camaro & Firebird. It is a salvage yard fairly local to me (Oklahoma City) pretty much dedicated to F-bodies. They ship out a lot of their parts, and I'm sure with a phone call you could find even the most mundane parts you need. Whamhammer got a steering column through them.
-
05-14-2020, 06:31 AM #6818
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,808
Navy Blue Metallic- 98 T/A, 00 FBVert, 78T/A
I know about them. Haven't yet had a need to reach out that far yet. I also when it comes to use parts to have a look at them in person.
-
05-15-2020, 11:50 AM #6819
- Join Date
- Sep 2010
- Location
- Bel Air, Maryland
- Posts
- 1,750
Silver- '02 Trans Am WS-6, 6M
SLP Air Lid/Smooth Bellows
L76 6.0L block, PRC Ported 243 heads, Texas Speed 224R cam.
Kooks Emissions LT Headers/Catted Y pipe
Elite Engineering PCV Oil Catch Can
SLP Smooth Air Lid and Smooth Belows
NGK TR55 plugs
Magnaflow Cat-back
Spohn Front Upper Tubular Control Arms
UMI Front Lower Tubular Control Arms
UMI Front Sway Bar
UMI Rear Lower Control Arms/ Adjustable Panhard Rod
UMI Welded-on Two Piece Subframe Connectors
Factory C5 Z06 17x9.5 wheels w/ 285-40-17 Continental Extreme Contact Sports all the way around.
Dyno Dynamics dynoed @ 415 rwhp
Weight reduction via removal of dead mice
-
05-15-2020, 11:53 AM #6820
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
new guy just got my first trans am today
By roger_johnson2002 in forum New Member IntroductionsReplies: 9Last Post: 07-14-2011, 08:35 AM -
Found this on the windshield of my Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 60Last Post: 03-10-2009, 12:11 PM -
Got into an accident in the Trans Am today
By ls1camino in forum Almost Anything GoesReplies: 30Last Post: 09-21-2008, 04:32 PM -
Just got my Trans Am today!
By vannatte in forum Firebird / WS6Replies: 34Last Post: 09-20-2007, 09:57 AM -
First time at Track today!!! 2000 Trans Am ws6
By gimmeadonut in forum Drag RacingReplies: 1Last Post: 11-12-2005, 01:34 PM
Bookmarks