Results 1 to 20 of 30
Thread: Dirty coolant..
-
11-20-2007, 09:56 AM #1
- Join Date
- Jun 2007
- Location
- St. Pete, Florida
- Age
- 35
- Posts
- 2,210
Silver+Black/Black+Silver- 1999 TA M6/03 GSXR 600
Dirty coolant..
I just bought my car yesterday, and the low coolant light is on.. I took out the dipstick to check it and it has a really dirty brown color to it..
I was wondering how and if i should flush out the coolant so I can replace it with cleaner fluid?
-
11-20-2007, 10:00 AM #2
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 37
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
yes replace it..and flush it while you are at it
congrads on the t/a
-
11-20-2007, 10:05 AM #3
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Yes flush it.
-
11-20-2007, 10:09 AM #4
-
11-20-2007, 10:24 AM #5
- Join Date
- Aug 2005
- Location
- Ft. Lauderdale, FL
- Age
- 76
- Posts
- 2,706
Sebring Silver- 2000 CamaroSS
-
11-20-2007, 10:31 AM #6
-
11-20-2007, 11:30 AM #7
- Join Date
- Jun 2007
- Location
- St. Pete, Florida
- Age
- 35
- Posts
- 2,210
Silver+Black/Black+Silver- 1999 TA M6/03 GSXR 600
where on that installuniversity site was it? i might pay to get it done.. just depends on how hard it looks.
-
11-20-2007, 12:40 PM #8
- Join Date
- May 2007
- Location
- Bartlesville, Oklahoma, United
- Age
- 37
- Posts
- 1,264
Bright Rally Red- 2000 Camaro SS #5075 M6
If I were you I would invest in a Haynes Service Repair manual. Its cheap and will show you how to do many things including maintence. You can find it at most auto parts stores.
-
11-20-2007, 01:31 PM #9
-
11-20-2007, 01:58 PM #10
sounds like someone mix green an orange = brown +1 to getting it flushed with a machine
-
11-20-2007, 02:18 PM #11
- Join Date
- Jun 2007
- Location
- St. Pete, Florida
- Age
- 35
- Posts
- 2,210
Silver+Black/Black+Silver- 1999 TA M6/03 GSXR 600
yeah it's weird.. or maybe just a dirty orange.. i have to do that and also change the oil.. oil's not dirty but i figure it will be good since i just got the car...
-
11-20-2007, 02:36 PM #12
-
11-20-2007, 02:40 PM #13
-
11-20-2007, 03:46 PM #14
the stock coolant is orange by nature. What do you mean by dirty looking? Have you popped the cap on the radiator and looked at the actual coolant itself? Mixing coolants is very bad. It'll clog up all kinds of stuff. If you're not sure on the maintenance history of the car I would also recommend having it flushed at a shop that has a machine to do it and you'll rarely hear of me recommending someone farm out the work to a shop. I feel most people can handle most of the work on their own car. Flushing a radiator is nothing, a monkey could do it. The problem comes in if the coolants been mixed. I pulled the upper and lower intakes on my truck that runs dexcool. Someone at some point had mixed the coolant and the back ports in the head had a clump of crap in them that had the consistency of a crayon. I can't imagine what's in the heater core as I have to back flush it just about every year because the heat sucks in the truck. PIA if the coolants been mixed. Have it flushed if you're not sure.
-
11-20-2007, 04:45 PM #15
- Join Date
- Jun 2007
- Location
- St. Pete, Florida
- Age
- 35
- Posts
- 2,210
Silver+Black/Black+Silver- 1999 TA M6/03 GSXR 600
yeah i guess i'll have it flushed and i'll have the oil changed tomorrow too.. it's throwing a few codes.. i read them in the book but i don't know what it means or how to fix it.
P0410 - Secondary Air Injection System Malfunction
P0412 - Secondary Air Injection System Valve A Malfunction
P0418 - Secondary Air Injection System Relay A Malfunction
That and the water temp guage is not reading correctly, it's saying it's running cooler than it should and it's not changing temps ever.
Any suggestions?
-
11-20-2007, 05:26 PM #16
the a.i.r. relay is under the hood on the drivers side. I would check that first. The temp coolant sensor is on the drivers side head above cylinder 1. If it is indeed reading cold it will make the car rich and you're not seeing the performance you should. I'm surprised you're not having any warm idle issues. How far off is it?
-
11-20-2007, 05:55 PM #17
- Join Date
- Jun 2007
- Location
- St. Pete, Florida
- Age
- 35
- Posts
- 2,210
Silver+Black/Black+Silver- 1999 TA M6/03 GSXR 600
the guage is not reading at all, it's not moving . it's near the bottom of the guage.. i think around 110 - 120 some where.
-
11-20-2007, 05:57 PM #18
and this isn't causing any problems when you start the car and it comes up to temp? My buddies vette had the same problem and his would die as soon as it went to closed loop. He's a heads/cam car though. I watched it through the scanner and it would go pig rich and die.
That temp sensor is really easy to change. It's right above the first spark plug on the drivers side in the head.
-
11-20-2007, 06:23 PM #19
- Join Date
- Jun 2007
- Location
- St. Pete, Florida
- Age
- 35
- Posts
- 2,210
Silver+Black/Black+Silver- 1999 TA M6/03 GSXR 600
No it's not causing any problems.. I think the only thing that might be causing any problems is the "Secondary Air Injection".
Oh and will the changing of the sensor cause any problems with the computer or anything?
I've just never changed one before so I'm not sure and I just got the car so I wanna make sure I do everything right...
Could it possibly be a fuse? Or should I try changing the sensor first?
-
11-20-2007, 07:06 PM #20
what year is your car? It sounds like you're saying the needle is moving up right? I'm not sure on the 99+ cars but on the 98's the temp gauge starts at 160 so if it's moving up from there maybe someone just has a lower stat in it. Know anyone with a scanner that can look at your temps to see what the scanner says you're running? If you're not having idle issues or anything I wouldn't just throw a temp sensor at it until you verify that something is wrong. Buying the car used could mean that the previous owner had it modded. Any mods on the car now?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NY 25th congressional election dirty dirty dirty
By krese in forum Political / Debate ForumReplies: 6Last Post: 11-12-2010, 03:07 AM -
Help: Need pic of coolant pump weep hole (Coolant Leak)
By Sweet Chops in forum General HelpReplies: 13Last Post: 04-20-2009, 07:14 PM -
Loosing Radiator coolant and milky colored coolant... what to do?
By JehalinTA in forum General HelpReplies: 23Last Post: 06-19-2007, 07:28 AM -
Coolant light...coolant level full.
By SR71 in forum General HelpReplies: 4Last Post: 01-08-2007, 09:35 AM -
ls6 intake coolant plugs or extra front coolant pipe?
By mikes ss in forum External EngineReplies: 3Last Post: 12-03-2005, 04:13 PM
Bookmarks