Results 1 to 14 of 14
Thread: Back to stallin out again
-
05-31-2013, 03:17 PM #1
Back to stallin out again
Thought i had cleared up this problem by cleaning my MAF but looks like I was wrong. I had the AC pumpin today and i stalled approaching a red light. now when i look back it would happen when the heat was on full blast too. I was told by a guy around my way it could be the tune on my car and that the air ratios and what not that my brain cant process right is off. I dont get how it could be the tune tho as i was tuned about 2 years ago and the only thing i have changed on the car is i went from a K&N CAI to a Varraram. These phantom problems are killin me
-
05-31-2013, 11:54 PM #2
-
06-01-2013, 03:37 AM #3
I have headers, cat and mufflers deleted. And the tune and varrarm i previously mentioned
-
06-01-2013, 03:02 PM #4
- Join Date
- Jan 2012
- Location
- Alabama
- Posts
- 519
Bright Rally Red- 2001 Chevy Camaro Z28
Any codes?
2001 Chevy Camaro Z28 A4
SLP cold air intake/lid, SLP smooth bellow, Pacesetter LT's, ORY, Magnaflow exhaust, BMR STB, adjustable Panhard rod, SFC's, LCA's, 1LE sway bars, cross-drilled rotors
-
06-02-2013, 01:59 AM #5
No codes. just a sudden drop in rpms and then she stalls.
-
06-02-2013, 05:34 AM #6
did this start right after the vararam swap? What you're describing does sound like an idle airflow issue but your mods aren't something that would need a ton of tuning for. Who tuned your car the first time? Have you checked for a vacuum leak? Like I say.....it does sound like an airflow problem but your mods don't really automatically make me think it's a tuning problem. Normally when you have an idle airflow issue it's because of a cam. I would probably start by making sure there's no air getting in after the maf. Can you swap the old K&N back on just to test or did you sell it? The vararam is better but I just can't see it effecting it that much. The maf should catch that anyhow & make up for it.
-
06-02-2013, 08:04 AM #7
I put the varraram in not about 2 summers ago and this started in the winter. i did get into a fender bender in november and needed to have the bumper and hood replaced. Think some how this could be the cause? I have taken off the varram since then to clean it and make sure it was on good. Andrew at CSP in PA tuned me
-
06-02-2013, 09:41 AM #8
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
What side was hit, may I ask? Maybe something was left loose or maybe the shock caused some damage to the PCM?
-
06-02-2013, 10:18 AM #9
Front bumper took the damage the passenger side grill was craked with a crack shooting down from it on the bumper and the hood got pushed up a bit.
-
06-02-2013, 10:37 AM #10
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
I am also tempted to say it's a tune issue. Maybe the IAT sensor is too sensitive with the Vararam?
-
06-07-2013, 11:43 AM #11
You guys know any tuners in the nyc/ long island area? Finding the time to shoot to PA and back is hard working 2 jobs right now
-
06-11-2013, 04:03 PM #12
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
I think Vette Doctors is in NYC. Can't remember if in NYC or in LI. There is also Stage 1 Auto over here in Pompton Lakes, NJ and Washington Garage in Bergenfield, NJ. Both Stage 1 and Washington Garage are SLP licensed dealers. You also have East Coast Supercharging down by Great Adventure.
-
06-11-2013, 07:57 PM #13
-
06-12-2013, 09:59 AM #14
- Join Date
- Jan 2009
- Location
- North Jersey
- Posts
- 11,496
Phantom Black Metallic- 2004 GTO M6
^^this. Garwood.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
ok so im back and getting back to the z28 that wont crank
By dany3350 in forum General HelpReplies: 9Last Post: 12-11-2012, 12:05 PM -
Since Jason's comming back it's also back !
By Danger731 in forum Western MembersReplies: 4Last Post: 02-14-2011, 07:01 AM -
SLP axle back VS Borla axle back
By DVrec21 in forum External EngineReplies: 13Last Post: 01-05-2011, 03:45 AM -
pacestters LT's on eddlebrock 2.5 cat back will i have to buy new cat back?
By greatwhiteZ28 in forum External EngineReplies: 3Last Post: 03-26-2007, 01:24 PM -
WTB: WS6 Parts: Door panel, seat back, back logo, WS6 logo, shift knob,T-top shades
By cascade in forum Parts Wanted / TradeReplies: 4Last Post: 12-12-2005, 03:06 PM
Bookmarks