2002 Trans Am WS6 - LQ9 408ci

**IceeWS6** · 06-15-2011, 01:04 PM

Time to sell my 2002 Pontiac Trans Am WS6.

Pewter Metallic Silver

Drivetrain:
LQ9 6.0 GMPP block, bored and stroked to 408ci 6.7
Texas Speed Magic Stick 4 cam - .649/.609 lift
Texas Speed 5.3 Stage 2.5 heads
Eagle fully forged rotating assembly, 11:1 pistons (11.7:1 compression with heads), H-beam rods
F.A.S.T. 92mm Intake + Throttle Body
Chromoly pushrods
Pacesetter longtubes
custom offroad 3in y pipe
Borla catback
Viper-spec T-56
Volant RAI
Stock Hurst short shifter
Walbro 255lph fuel pump
44lb injectors

Suspension:
Hotchkis strut brace
Drifz NOS-B 18x8.5 F 18x9.5 R
Nitto NT555 245/275
Moser hardened axles, studs, and wheel bearings

Needs:

Tuned (made 530/460 on a mustang awd dyno, so probably closer to 550/480 without a tune. should make 600/530 more or less on a good tune, depending on the dyno. also, made 530/460 on a dying stock fuel pump, currently has 255 walbro)

driver's headlight motor. stop switch broke.

right rear wheel is bent, may have a set of c5 wheels on it in the next week or two.

driver's window motor (have it, never got around to installing)

b1s1 o2 sensor

coolant temp sensor

needs heavier duty clutch and flywheel. still has the clutch from the ls1 build, isn't quite enough for this beastly motor.

hood clearcoat is pretty bad, but hey that's gm for ya.

this car is an absolute beast. i kinda hate to get rid of it, but i want to do another build, boosted this time.

Asking 24,500 ***OBO***
or trade for a 00+ black 6spd ram air plus CASH
or trade for a 98 Metallic Purple WS6 (pretty sure that will never happpen but oh well)

don't be afraid to make an offer! Thanks guys!

**IceeWS6** · 07-11-2011, 07:18 PM

BUMP

clutch went out, price drop 21,000 OBO

need it gone.

trades plus cash considered

**IceeWS6** · 07-11-2011, 07:19 PM

VIDEO OF CAR RUNNING

**WICKEDLS1** · 08-13-2011, 02:04 PM

bump for nice car but fyi no body is going to bite on that price especially if its not driveable

**IceeWS6** · 07-25-2012, 10:19 PM

Price drop, 16,500. This thing is just sitting and I'm not going to be able to fix it.

Looking to trade for a c5 vette or a swapped third gen t/a. Email me at byrdrebel@gmail.com or cm. text at 828-280-410six, really need it gone

**FasstChevys** · 07-26-2012, 01:30 PM

Wow - free bump - sorry you're down on your luck!

If I find an LS1 for ya, how much cash to boot for that engine that's in there?

GLWS!

**2002ssslp** · 07-26-2012, 04:32 PM

The engine is what I want as well. Got a number in mind ?

**IceeWS6** · 07-26-2012, 11:44 PM

Thanks for the interest guys. I'm not looking to sell just the engine, I really need to either sell the whole thing or get a trade worked out.

**2002ssslp** · 07-27-2012, 05:32 AM

Let me know if you decide to split the car up. You know, the sum of the parts is worth more then the whole. Just saying.

**IceeWS6** · 07-27-2012, 11:13 PM

Originally Posted by 2002ssslp

Let me know if you decide to split the car up. You know, the sum of the parts is worth more then the whole. Just saying.

I know, I just don't have the time to part it out unfortunately

**IceeWS6** · 08-07-2012, 08:59 PM

Bump. I'd really like to trade this for a c5 6mso I don't waste money on my e30 lol.

**IceeWS6** · 08-29-2012, 07:24 AM

Bump. Found the perfect third gen candidate for my drift / mountain car...

Just for shits and giggles, how much would someone be willing to pay for the drivetrain? Hate to part it out, but in the event I do...

**adam0321** · 09-10-2012, 07:48 PM

If you had another 4th Gen project I would trade you my 99ws6 + cash. Stock t56 ls7 clutch good interior stock rear end same clear coat as you blown engine parts stolen by mechanic and a brand new in the crate lq9 408 rotating assembly. built by lme.

Any interest. Please....
Sent from my SCH-I500 using Tapatalk 2