What are these parts?

**Justin23454** · 09-20-2010, 07:08 PM

What are the names of these parts>?

Sorry the sun got in the way of this one, but didnt notice till I put it on the computer.

(there was a broken off sensor or something on the middle circle.)

**KMdef9** · 09-20-2010, 07:12 PM

The right is part of the HVAC line and the left is PCV..... I think.

EDIT: Dayum! What happened to the intake?

**Justin23454** · 09-20-2010, 07:23 PM

Originally Posted by KMdef9

The right is part of the HVAC line and the left is PCV..... I think.

EDIT: Dayum! What happened to the intake?

something dropped on it, and broke it and broke whatever else I was asking about, need to know the names so I can have them replace it.

**Mr. Luos** · 09-20-2010, 07:31 PM

MAP sensor
Oil pressure sender

Harness in top pic goes to knock sensors.

**Justin23454** · 09-20-2010, 07:34 PM

Thanks

**2000ls1tranz** · 09-20-2010, 10:58 PM

middle one is map sensor

**2000ls1tranz** · 09-20-2010, 11:00 PM

lol looked at circles wrong.... the right one is map botttom pic

***SMWS6TA*** · 09-23-2010, 01:29 PM

the middle circle is your oil pressure sender. Cost about $40 at O'Reillys

The right is for the HVAC, (it is a small line that goes to your ac) AND the thick line goes to your brake booster. This is what usually breaks the oil pressure sender while the intake is getting pulled out. If you don't know about it you break it. (I sure as hell did and Orion warned me about it too)

Left is for your PCV.

I see your intake is cracked? How?

Are you needing another LS1 intake?

I just replaced mine with a LS6 so I'm willing to sell this one cheap. $45 + shipping

PM if interested

***SMWS6TA*** · 09-23-2010, 01:40 PM

this should help

**Justin23454** · 09-24-2010, 05:21 PM

Originally Posted by SMWS6TA

the middle circle is your oil pressure sender. Cost about $40 at O'Reillys

The right is for the HVAC, (it is a small line that goes to your ac) AND the thick line goes to your brake booster. This is what usually breaks the oil pressure sender while the intake is getting pulled out. If you don't know about it you break it. (I sure as hell did and Orion warned me about it too)

Left is for your PCV.

I see your intake is cracked? How?

Are you needing another LS1 intake?

I just replaced mine with a LS6 so I'm willing to sell this one cheap. $45 + shipping

PM if interested

No Ive got one, thanks though. But I do need Coil brackets from a 99 if anyone has some. Didnt know the 98 wouldnt fit! or is there a way to make em fit? Probly just need to get the 99 brackets Im guessing.
(I found a set on ebay for 45$ total) good deal?