New Offsets...

**R_Yates69@Hotmail.com** · 12-03-2008, 02:09 PM

1999 Trans Am WS6

17*9 25mm Offset/6inch Back

Will it work?

**Blue28** · 12-03-2008, 07:25 PM

Originally Posted by R_Yates69@Hotmail.com

1999 Trans Am WS6

17*9 25mm Offset/6inch Back

Will it work?

I'm sure it will work if you roll the fender lips in the rear, and have a adjustable PHB.
IMO, try and find some wheels with a +50 to +35 offset.

**Eugenio_SS** · 12-03-2008, 11:20 PM

will be exactly as the 17x11 ZR1 wheels but with 2" clearance on the inside well.
roll the fender to be safe... still think you should go w/ the 18x10 which won't stick out as much, not needing the rolling of the fender and still plenty of clearance on the inside, not requiring the BFH.

**rstewart** · 12-11-2008, 05:23 PM

i spoke to Will @ Fikse & he tells me in a 17--18--19 " T/A wheel that is a 9" --11" in width --you will need a +38 Offset .
One has to be carefull buying a Corvette wheel to be sure the hub opening in correct for the F body camaro & T/A . Corvette has the smaller opening.