Results 1 to 20 of 65
-
03-12-2008, 02:42 PM #1
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
OMG too many camaro parts w/pics (2000 part out)
All parts are out of a 2000 LS1 Auto Camaro that was in a roll over accident. I purchased it in 2004 to swap the LS1 into my Blazer. The Camaro had 59k on the odometer when the parts were removed in 2005. I will likely be adding more parts and pics to the list over time. Prices are OBO but do NOT include shipping. Feel free to pick up any items in Los Angeles near LAX 90045 to avoid shipping costs. Otherwise pm me or email me with your zip and what you want at bigdeezs@gmail.com for a shipping quote. Paypal will be accepted. I will most likely use Fedex or the post office to ship items. Some items are pretty large and I’d like to try to avoid shipping them if at all possible: (seats, dash, dash pad, rear panel, cooler lines, gas tank etc…). I have many more pictures and if you want more pics just ask.
5.7L AC compressor $100
Coolant Overflow bottle $30
Passenger side amber bumper lens $10
Intake assembly (no filter) $30
Has a few cracks in the plastic, a bit dirty and missing one clip…seals and works fine.
Door sill step-in trim $15 each
Left t-top handle $5
AC Condenser $50
AC Drier $10
Jack and tire iron $10
Jack instruction plastic $5
Trunk cover material (large and small piece) $15
Wiper motor $10
Wiper linkages $10
Auto trans 4l60e oil cooler lines $50
Heater core to water pump hoses $25
Last edited by Bigdeezs; 04-08-2008 at 11:13 PM.
Swapped in a 2000 LS1 into a 95 S10 2dr Blazer COMPLETED Aug 6, 2005
LS6/T56 280Z completed May 2008
Special Thanks to: Haddadmotorsports.com
-
03-12-2008, 02:43 PM #2
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
Vacuum Resevoir $15
Camaro Bumper insert (has a couple cracks) $20
Wiper fluid resevoir w/pump (upper mounting points cracked) $25
Gas cap + trim $15
Seat belt set $80
Brake master cylinder $30
Brake booster $75
Rear cabin vent $5
Dome light $25
Hanger hook $5
Rear Camaro panel Pewter? w/Z-28 badge $75
Seat set (front and rear) $300
Spring isolators/mounts $5 each
Center console (loose ashtray door, works fine) $150
Delco monsoon amp $50
Last edited by Bigdeezs; 04-08-2008 at 11:13 PM.
-
03-12-2008, 02:44 PM #3
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
driver side Taillight housing only $50 each
Rear shock topper pads $5 both
Traction control throttle controller $40
Auto headlight/DRL box? $10
Rear bumper corner lenses $5 each
Rear trunk latch w/electric release $25
Headlights w/mounting brackets and bulbs $150 each
Trunk t-top holders $30
Door and trunk lock set w/key $75
Power Door latch/lock actuator $25 each
BCM $60
Last edited by Bigdeezs; 04-07-2008 at 11:16 AM.
-
03-12-2008, 02:45 PM #4
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
Remote/ Key fob $25
Plastic gas tank $175
Fuel pump/sending unit $75
Passenger side pillar cover (has some scratches and nicks) $20
HVAC Box w/blower and heater core $100
Under dash panels $50 for all 3
Steering wheel airbag $100
Steering wheel with Radio controls $100
Gauge bezel $40
HVAC controls $30
Dash center vent trim w/ 2 switches: ASR and fog $50
Glove box $50
Headlight switch $30
Dash w/pass airbag $250
Last edited by Bigdeezs; 04-07-2008 at 11:19 AM.
-
03-12-2008, 02:45 PM #5
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
Dash side vents $15 each
Dash pad $100
-
03-12-2008, 08:04 PM #6
- Join Date
- Dec 2004
- Location
- )
- Posts
- 9,128
- iTrader
- 3 (100%)
SS: NBM, tan top- 1998-SS, 2010 Jetta TDI
do u have a LS6 intake, cant remember if the 2000's had that, PM me if you do,
thanks,
Jeff
-
03-13-2008, 01:08 AM #7
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
I have one on my Blazer LOL but its not for sale. Only 01-02 f-bodies had it. I do have an extra LS1 manifold though.
-
03-13-2008, 12:57 PM #8
- Join Date
- Apr 2007
- Location
- indiana
- Posts
- 35
- iTrader
- 0
black- 1997 Camaro
Do you have the rear brakes?
-
03-13-2008, 02:31 PM #9
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
diff and brakes are gone sry
-
03-13-2008, 02:44 PM #10
do you have the driver side visor
-
03-13-2008, 07:22 PM #11
- Join Date
- Dec 2005
- Location
- Houston, TX
- Age
- 38
- Posts
- 11
- iTrader
- 0
Black- 2002 Camaro SS
passenger side tail light still up for grabs? also would you let the rear defrost switch go for $5?
-
03-13-2008, 10:04 PM #12
-
03-14-2008, 07:32 AM #13
- Join Date
- Feb 2007
- Location
- Atlanta
- Age
- 44
- Posts
- 661
- iTrader
- 0
Navy Blue Metallic- 2002 Camaro SS
Hello. Do you still have the ashtray and the Monsoon door speakers? If so, shoot me a PM.
-
03-14-2008, 10:51 AM #14
- Join Date
- Jun 2007
- Location
- Houston
- Age
- 37
- Posts
- 138
- iTrader
- 0
Black- 1998 Trans Am
would you be willing to sell just the plastic piece for the seats that holds the seat belt to the seat?
-
03-14-2008, 03:07 PM #15
- Join Date
- Dec 2005
- Location
- Houston, TX
- Age
- 38
- Posts
- 11
- iTrader
- 0
Black- 2002 Camaro SS
-
03-14-2008, 03:16 PM #16
- Join Date
- Mar 2008
- Location
- Chicago
- Posts
- 7
- iTrader
- 0
Do you have the front caliper brackets? Let me know.
-
03-14-2008, 08:19 PM #17
- Join Date
- Oct 2005
- Location
- Los Angeles
- Posts
- 155
- iTrader
- 0
Black- 1995 Chevy LS1 S10 Blazer
In use on my Blazer...sry
That wouldn't be caused by the switch. the problems is whatever the switch sends a signal to. I would prefer not to split up the panel anhow.
PMed
Ashtray is staying with the center console and the speakers I might be using in another car...not sure yet
-
03-15-2008, 01:30 AM #18
- Join Date
- Apr 2007
- Location
- Tempe AZ
- Age
- 39
- Posts
- 432
- iTrader
- 2 (100%)
Black- 2010 Black Camaro 2SS
any idea if that glove box would fit a TA..ive been lookin for a lockin glove box
-
03-15-2008, 01:49 AM #19
-
03-17-2008, 03:39 AM #20
- Join Date
- Jun 2007
- Location
- Houston
- Age
- 37
- Posts
- 138
- iTrader
- 0
Black- 1998 Trans Am
paypal sent thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
For Sale: 2000 Camaro SS SLP 6speed roller/part out if enough interest
By colburn22 in forum Vehicles For Sale / TradeReplies: 9Last Post: 09-14-2010, 04:56 PM -
2000 LS1 Camaro part out many more items listed
By Bigdeezs in forum Parts For Sale / TradeReplies: 86Last Post: 07-18-2009, 08:24 PM -
***2002 Camaro Z28 A Few Parts Left on Part Out!!!!!***
By aztectt in forum Parts For Sale / TradeReplies: 2Last Post: 04-08-2007, 10:08 PM -
***2002 Camaro Z28 LOTS of Interior Parts! Sale Part II!!!!**
By aztectt in forum Parts For Sale / TradeReplies: 4Last Post: 02-24-2007, 09:16 AM -
Need to find a part for my 2000 black camaro
By shellyr43 in forum New Member IntroductionsReplies: 1Last Post: 12-05-2006, 08:51 PM
Bookmarks