Me and Fierce-LS1 are doing tranny swap m6 to a4

**eddielb** · 08-20-2007, 07:20 PM

Me and Fierce LS1 (Voltan) are swapping trannys, his used to be an auto but now is m6 with m6 harness.. mine is A4, so we swapped out the trannys AND wire harness, so now my car has m6 harness and m6 tranny (well not yet but in progress) and his car has the auto tranny and harness already installed and fully plugged in... but when we turn the key to the on position, no indicators light flash or anything, nor will the car start, but all other electronics work, got any ideas?

**ATCharming** · 08-20-2007, 07:26 PM

subscribed as id also like to know. i may be buying an m6 car and i possibly will swap in an a4

**Justin23454** · 08-30-2007, 08:42 AM

why swap an m6 for an a4?

**eddielb** · 08-30-2007, 09:06 AM

He was originally an A4 and he wanted to go back to stock, so thats why

**ATCharming** · 08-30-2007, 11:29 AM

Originally Posted by eddielb

He was originally an A4 and he wanted to go back to stock, so thats why

same here lol
plus the fact that stalled autos launch much better, they are more convenient, and more consistant

**eddielb** · 08-30-2007, 11:36 AM

but in my opinion no where near as fun as a manual car -

**99bluebird** · 09-14-2007, 06:28 PM

When I took out the stereo of my old car the same thing happened. The first time it was a blown (gauges) fuse. The second time it turned out to just be a bad ground from one of the connections (I removed most of the dash because I had lots of shit wired in: alarm, scrambler, valentine, CB, etc). Try cleaning and regrounding the relevant gauge cluster wires. I hope that is all it is or else you are bucked.