Results 1 to 10 of 10
Thread: Rockerarms
-
04-19-2007, 08:59 AM #1Junior Member
- Join Date
- Feb 2007
- Location
- vermont
- Posts
- 11
black- 2000 camaro
Rockerarms
What's A Good Rockerarm To Go With. Is The Slp 1.85 Any Good
-
04-19-2007, 09:04 AM #2member since may 2000
- Join Date
- Dec 2002
- Location
- n/w chicago
- Age
- 55
- Posts
- 6,932
black- 2000 nhra edition formula
if you never plan on getting a cam, they are o.k
2000 nhra edition formula
a few bolt ons, 379 rwhp
11.96 @113.25
-
04-19-2007, 09:40 AM #3Member
- Join Date
- Dec 2005
- Location
- Cypress, TX
- Age
- 55
- Posts
- 229
White- 98 Trans AM
I use the Yella Terra shaft mounted and they have been great. I would stay away from rockers in the 1.8 ratio as it does restrict what cams you can use. I had the Crane 1.8's and for all the screwing around with clearance worries and other valve train stuff I really do not recommend going over the standard 1.7 ratio.
98 T/A: HPE 5.3 Heads, 238/242 113 cam, Kooks 1 7/8 stepped LT headers, Custom Y pipe, Cut out, Borla, NW 90MM TB, FAST 90MM Intake, TB Bypass, Under Drive Power steering and Crank, 150 Dry NOS, Yella Terra rockers, 3400 TC, HPE tuning,
-
04-19-2007, 10:46 AM #4Junior Member
- Join Date
- Feb 2007
- Location
- vermont
- Posts
- 11
black- 2000 camaro
I Want To Do Heads And Cam This Summer So What Rocker Sould I Use
-
04-19-2007, 12:13 PM #5Slower Than a 3rd Gen
- Join Date
- Aug 2005
- Location
- Cape Coral, FL
- Age
- 40
- Posts
- 3,100
Mystic Teal- 99 Trans Am & 01 CBR 929
leave them alone until you do your cam swap. I am using my stockers with the new cam, most people do...
-
04-19-2007, 12:52 PM #6Member
- Join Date
- Jun 2006
- Location
- Fleetwood,Pennsylvania
- Age
- 38
- Posts
- 249
Red- 1999 Chevy Camaro Z28
I'm currently running stock rockers as well with my cam swap. I would look into Harland Sharp's roller rockers. They're not too out of this world for price. The only thing I heard was they're a little nose heavy. I may be wrong on this though.
99 z28 cam,m6 ,S60 4.56gears,Fast 90/90 full boltons,more mods one day.
11.2 @ 123mph.
-
04-19-2007, 03:34 PM #7Senior Member
- Join Date
- Apr 2007
- Location
- TN
- Posts
- 1,197
2005 GTO M6 Black- 2000 Z28 A4 Red
You also cant use the 1.85's without changing the valvesprings to at least the yellow Z06's. I did it too much hassle for nominal gains. Plus now I have to go back to my stockers (glad I kept them) that I am getting a cam and New dual PRC Valvesprings.
-
04-19-2007, 03:42 PM #8member since may 2000
- Join Date
- Dec 2002
- Location
- n/w chicago
- Age
- 55
- Posts
- 6,932
black- 2000 nhra edition formula
stockers are fine even for heads/cam
Originally Posted by ssmoken
-
04-22-2007, 08:09 PM #9UberTapping Friction Pimp
- Join Date
- Mar 2007
- Location
- Omar's Tittie Taverna & Grill, Deh Rawod
- Posts
- 1,446
18D Cock Diesel- 1999 Z28; 98 SS #2043 RIP
what about with this H/C setup:
http://cgi.ebay.com/ebaymotors/ws/eB...1434730&rd=1,1
Will 1.7 Harland Sharps make HP improvements?
-
04-22-2007, 08:27 PM #10Senior Member
- Join Date
- Jul 2005
- Location
- orlando, fl
- Posts
- 7,364
black- 2014 camaro 2ss/rs
i run the vinci/crane 1.8 accelerated lift rockers in the wife's car. here's the dyno with the stock cam and stock tune.
Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
60,xxx ls1 longblock,intake,maf NO ROCKERARMS!!
By sobaka79 in forum Parts For Sale / TradeReplies: 0Last Post: 02-06-2008, 09:48 PM
Bookmarks