Results 1 to 20 of 36
Thread: K&N or Paper?
-
03-06-2007, 07:47 PM #1
- Join Date
- Jan 2007
- Location
- Rhode Island
- Age
- 38
- Posts
- 1,426
Arctic White Hardtop- '98 Formula M6
K&N or Paper?
This might sound like the ultimate noob question but... The other day I was tinkering under the hood and was reminded that the previous owner of my car had put in a paper filter when he installed a whisper lid. Needless to say, the thing was filthy, and I figured I should replace it. I've read that for LS1's a paper fliter is better than a cotton filter (like K&N). Is this true? Or should I just get a K&N at Autozone like everyone else?
Last edited by Secret Formula; 03-06-2007 at 07:54 PM.
-
03-06-2007, 09:50 PM #2
- Join Date
- Jan 2007
- Location
- Kerman
- Posts
- 158
Silver- 2002 Firebird Formula
k and N i felt it flowed better
-
03-06-2007, 09:52 PM #3
- Join Date
- Mar 2006
- Location
- LS1 land
- Age
- 37
- Posts
- 1,666
K&N here - no problems ever. Don't forget the free ram air mod.
-
03-25-2007, 06:59 PM #4
- Join Date
- Sep 2006
- Location
- Shreveport, LA
- Age
- 39
- Posts
- 297
Black on black.- 2001 WS6 M6 (stock)
Paper, K&N is a waste, lets a LOT! more dirt in, and isnt worth but 1-2whp AT THE VERY MOST! On an LS1 the paper filter is sufficient up to about 500whp.
-
03-25-2007, 07:44 PM #5
-
03-25-2007, 10:16 PM #6
- Join Date
- Mar 2006
- Location
- LS1 land
- Age
- 37
- Posts
- 1,666
-
03-26-2007, 01:22 PM #7
-
03-26-2007, 01:38 PM #8
- Join Date
- Jul 2005
- Location
- Jacksonville, FL
- Posts
- 2,723
Paper or K&N - both are fine. Just don't over oil the K&N when cleaning. Been using the same one in my car since '01.
-
03-26-2007, 06:48 PM #9
-
03-26-2007, 08:15 PM #10
that sounds odd that the k&n lets so much dirt in i have an old truck with almost 180xxx miles and it has had a k&n on it since 70xxx maybe i just drive around all the dirt
so.......... how many rwhp is the greese in the tb worth? j/k
-
03-26-2007, 08:30 PM #11
- Join Date
- Sep 2006
- Location
- Shreveport, LA
- Age
- 39
- Posts
- 297
Black on black.- 2001 WS6 M6 (stock)
I am willing to bet if you got a diamond sharpening stone and layed 1 hair scratch down the wall of each cylinder you could never tell...would you be happy if it came from the machine-shop that way though? I sure wouldn't. Not running a K&N to avoid contaminants is like doing the TB bypass mod to gain hp. Just 1 more little thing you can do to help.
-
03-26-2007, 08:39 PM #12
- Join Date
- Sep 2006
- Location
- Shreveport, LA
- Age
- 39
- Posts
- 297
Black on black.- 2001 WS6 M6 (stock)
http://www.bobistheoilguy.com/airfilter/airtest3.htm
http://www.bobistheoilguy.com/airfilter/airtest2.htm
http://mymiata.paladinmicro.com/K&NComments.htm
http://forums.swedespeed.com/zerothr...&postid=195593
http://www.fuelinjection.net/kne/kne_test.htm
http://www.roadkill.com/~davet/moto/air.filters.html
http://www.bolhuijo.com/airflowtest/
and the most CONCLUSIVE/REPUTABLE test I have seen...
http://www.duramax-diesel.com/spicer/index.htm
I use ACDelco in my WS6 and you will never find me using ANYTHING but a regular paper filter. The rest is just a gimmick.
FYI I dynoed my 5.0 with and without the filter. 4whp increase w/o filter (on a carbed motor with 12x3" circular enclosure, on and then off).
4whp from paper vs. nothing...K&N wont do shit in the power dept. Period. I do know it doesnt filter worth crap though. Above links show that well enough.Last edited by stanger88; 03-26-2007 at 09:26 PM.
-
03-27-2007, 04:40 PM #13
i never noticed an increase in power but my mileage did improve a little im sure there are some good reasons not to use k&n and the scratches? dont think i have ever seen an engine without them unless its new then honemarks or crosshatch my only reason to use one is cause i can clean it oh and uncle billy bob says it makes his tractor run real good
-
03-27-2007, 05:19 PM #14
Use paper, no gains from the K&n
-
03-27-2007, 05:21 PM #15
I cant believe this shit is still being debated.
A K&N will not ruin your engine. Not with proper care it wont. The risk does not outweigh the reward.
In any case, with the FRA mod or even an FTRA installed, youd have to change out papers once every month and that just sucks.
I have a Holley PowerShot by the way.
-
03-27-2007, 06:07 PM #16
-
03-29-2007, 12:34 PM #17
- Join Date
- Mar 2006
- Location
- who knows
- Posts
- 69
how about the blackwing from slp its not paper and not cotton.... syn media
-
03-29-2007, 07:47 PM #18
-
03-30-2007, 05:10 AM #19
- Join Date
- Mar 2006
- Location
- who knows
- Posts
- 69
-
03-30-2007, 05:09 PM #20
- Join Date
- Feb 2007
- Location
- Eastern Long Island, NY
- Posts
- 65
Black 2002 Formula M6- SOLD on 11/21/2009
This is it, right? If it is, do you or anyone know if it is less expensive somewhere else?
http://marylandspeed.com/product_inf...roducts_id=225
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
k&n vs paper
By Justin23454 in forum General HelpReplies: 36Last Post: 03-10-2011, 04:05 AM -
The F&F. owned.. in the paper.. by me.
By JoshieDoom in forum Almost Anything GoesReplies: 5Last Post: 06-18-2008, 12:19 PM -
I need an paper idea
By hutch1999 in forum Almost Anything GoesReplies: 51Last Post: 04-29-2008, 06:21 PM -
K&n Or Paper Filter?
By kwade in forum General HelpReplies: 91Last Post: 05-23-2007, 11:39 PM
Bookmarks