Results 1 to 4 of 4
Thread: help
-
06-02-2014, 06:05 PM #1
- Join Date
- Feb 2008
- Location
- jupiter fl.
- Posts
- 159
white- 2000 trans am
help
I have two ques.
where do I get the egr an intake block off plates if I do a delete
and if I put lth with no cats does it produce gas fumes
this is on a 2000 ws6
-
06-03-2014, 02:14 AM #2
You can buy block off plates from a couple of sources - Hawk's Third Gen is just one example. You'll need a tune to turn off the SES after removing the EGR system, so include an update for your longtubes and you'll be fine. One other part that you should add is a set of Bosch P/N 13111 oxygen sensors for the front. They come with an extra long harness so no extensions are required. It is also a good idea to replace O2 senders as their performance degrades over time. You can delete the rear sensors and also have them tuned out.
-
06-03-2014, 05:24 AM #3
- Join Date
- May 2013
- Location
- Nashville, TN
- Posts
- 1,434
Black / White- '00 T/A M6/'19 Hemi Truck
im sure you have already looked into this...but make sure you dont need to pass emissions where you live. I never had to pass emissions when I lived in FL, but if you start getting rid of exhaust stuff you will not pass a sniffer test...you'll pass a computer test after you get a tune if they just plug in and check everything, but you'll fail a visual and sniffer test.
-
06-05-2014, 11:23 AM #4
- Join Date
- Feb 2008
- Location
- jupiter fl.
- Posts
- 159
white- 2000 trans am
thanks guys im trying to have everything lined up to shorten down time
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks