Patriot Performance Stgii Ls6 Heads F/s!!!

I planned on putting these heads on a 383 but decided to go heads and cam on my stock motor instead. I'm going with a H/C package from texas speed and i need to get rid of these to help pay for it! They are Stage II ported/polished Patriot Performance LS6 heads (6.0 castings) with 650 lift dual springs, 2.055 / 1.57 valves,5 angle valve job, and 59cc combustion chambers. They come in the origional box with Cometic head gaskets and GM head bolts! I paid $1360.00 to get them to my door brand new from patriot. I'm asking $1,000 + shipping(usually about $100 thru fedex)!! i will accept paypal, money order, or cashiers check.

http://i64.photobucket.com/albums/h1...e05/014_14.jpg

http://i64.photobucket.com/albums/h1...e05/015_15.jpg

http://i64.photobucket.com/albums/h1...5/100_0288.jpg

http://i64.photobucket.com/albums/h1...5/100_0296.jpg

http://i64.photobucket.com/albums/h1...5/100_0290.jpg


http://i64.photobucket.com/albums/h1...5/100_0300.jpg

http://i64.photobucket.com/albums/h1...5/100_0289.jpg


http://i64.photobucket.com/albums/h1...5/100_0295.jpg

Will these work on my 99 SS? Going with MTI R1 cam. 232/236 dur. and 571/578 lift.Will there be any valve clearance problems?

Also they should give me compression ratio of close to 11:1 right?

they will fit any ls1 98-02. i was told the compression will be around 11:2-2.5:1 with these heads and gaskets with stock pistons. i doubt you would have any clearance issues with that cam. sent you a pm

what kind of gains were you expecting to see w/these heads? what is the FACTORY compression ratio

would I have any clearance issues running a cam w/a .581/.581 lift? thanks

still for sale?

Quote:

---

Originally Posted by SSwt00SS

what kind of gains were you expecting to see w/these heads? what is the FACTORY compression ratio

would I have any clearance issues running a cam w/a .581/.581 lift? thanks

still for sale?

---

yes, they are still for sale. The stock c/r is 10.1:1, Gm High Tech did a heads only swap on a stock ls1 and claimed 41 rwhp increase. i belive they tested the same stg2 ls6 heads but with 64 cc combustion chambers. So with the smaller 59cc combustion chambers of these heads you have a higher comprression ratio, which should add a few more hp to that. As far as your cam, its pretty close to the patriot preformance cam they "Flow matched" for these heads: 226/226 Dur. @.050 .585"/.585" Lift 112 LSA so i dont think you would have a problem.
:flex:



These heads are $1,295.00 - w/o shipping on patriots website: http://www.patriot-performance.com/w...05234&DID=1225

Real nice heads. Wish I had the coin for em.

SOLD!!!

Buyer couldnt come up with the money. SO THEY ARE UP FOR SALE AGAIN! $1,000 + SHIPPING

BTW there should be more pics of them on my cardomain page, thanks.

if the price comes down pm me thanks.

1k PLUS shipping is the lowest i'll go

Wanna trade for some 5.3L heads revalved with Ferrea valves, a Powerdyne kit, or some 42# injectors?

Quote:

---

Originally Posted by Phantompooper

Wanna trade for some 5.3L heads revalved with Ferrea valves, a Powerdyne kit, or some 42# injectors?

---

Thanks but no thanks. I would be interested in including these heads in a partial trade for a nice set drag wheels/tires though... some pro stars, bogarts, or ccw drags.

start you known thread. do not post you parts for sale in someone elses.

TTT for the night crew

I'll give you a $1000 shipped. Let me know Thanks Rick

How much shipped to zip: 96825?

Thanks!

Quote:

---

Originally Posted by 808ws6

How much shipped to zip: 96825?

Thanks!

---

PM Sent

I'll take the heads do you have a phone number to get ahold of you?
Thanks Rick

Still for sale... TTT

you might want to lower the price, patriot is selling them for $995 new fresh from the factory.