Printable View
Vehicle: 1998 Camaro z28
I wanna replace the stock "yellow" fog lights with an HID conversion kit (8000k or 10000k). The set I have for my low-beams work great! I would like the "fog lights" to match in color as well as light output.
Anyone tried this?
what kit did you use to switch over your headlights.. post some pics
Pics coming real soon.
Wondering the same thing man! Post those pics up already, LoL!
Pics should be going up today.
And yes, I lowered the angle of the headlights a bit as to not blind other drivers. And you can tell the lighting difference of the fog lights that I would like to correct.
Where did you get the kit from and how much? Must have on my 98Z28.
I'm not sure if the seller is a sponser here, but...
I purchased the kit on eBay; Autovizion 10,000K HID Xenon kit, for about $220.
Price wasn't too bad, since I get a whole lot better light than stock, it was a simple 30 minute install, and 1 year full replacement warranty. Personally, I think they're great. And again, I've angled the lights down just a bit to keep from totally blinding other drivers. Still don't see how they can equip those 12' tall SUVs with HIDs, with their headlights angled smack dab right into your rear view mirror. Now, if I can just figure out how to get similar lighting for my fog lights/driving lights. Anyway, I stuck with my aftermarket hi-beam bulbs; they function just fine for me, and don't give off-yellow light.
Whos the seller? Will make it easier to find the same kit!
Rob
McCulloch
Thats the name of the product. Whats the sellers name?Quote:
Originally Posted by cobrahunter
Is this the same kit you purchased?
http://cgi.ebay.com/ebaymotors/6000K...59659110QQrdZ1
Also does this just plug into the light housing? Or do you have to modify it? And are you using this as a high beam or low beam?
Rob
No, this is the kit I purchased:
http://cgi.ebay.com/ebaymotors/ws/eB...Pr4_PcY_BIN_IT
No, this is the kit I purchased:
http://cgi.ebay.com/ebaymotors/ws/eB...Pr4_PcY_BIN_IT
i just ordered the H.I.D. kit from McCulloch!!!!! 12000k OhhhhYeah!!!! Should be here tomorrow cant wait. I've been looking for a conversion kit for under a friggin 1000 dollars. Good lookin out everyone. As soon as i install them i will post pics.
Thnaks to all:notworthy:
Installation is really simple. Just be careful when connecting the silver (+) and (-) leads to the plastic connector. If you connect them backwards, they are a b*tch to disconnect.
Here are some pics of my install.
Haven't gotten mine yet, but thanks for the pics!!! It looks like a real clean install. :drivin:
ok...so what about the HID foglights? the headlights look a LOT brighter than the foglights do.
So far, the only thing I've found that comes close to HID fog lights, are the PIAA 1100X driving lights. However, the (correct) install seems to be extremely intensive. I don't mind fabricating a set of brackets, but I figured that I could just splice into the wiring of the stock fog lights, but apparently there's the issue of trying to use the PIAAs with the stock fog light switch, which I would want to do. So, I'm going with a set of 8500K hyper white bulbs, which are a bit on the blue side. Not as bright as PIAAs or HIDs, but definately are brighter than the stock fog light bulbs.
so maybe if i went with the 5000k or 8000k headlights and the 8500k hyper foglight bulbs it would be a better match...