well... the all mighty LS6 finally took a shit... pulling in the parking lot at work i pomped on it and all of a sudden the ugly symphony began... rod blew out and slo took out my power steering line and ended up stuck in my hood... :
Printable View
well... the all mighty LS6 finally took a shit... pulling in the parking lot at work i pomped on it and all of a sudden the ugly symphony began... rod blew out and slo took out my power steering line and ended up stuck in my hood... :
DAMN!! :cry:
dam that sucks man, how many miles did u have on it? What are your mods?
about 12,000 miles on it... :sulk:Quote:
Originally Posted by ss~zoso~ss
I'm sorry to hear that Spaz. I didn't even realize you had an LS1.
of course i do... err... did... i had 4 LS1 engines in my 99 t/a and now a LS6 that shit out on me... :(Quote:
Originally Posted by SiggyZ
either you are a retard for blowing five engines or it is april fools day
me haves a feeling its april fools !
http://i132.photobucket.com/albums/q...az/Pushrod.jpg
had to wait untill the fucker cooled down enough to take my shop rag (i'm at work don't want to get oil all over) and pull that bitch out of my hood... looks like i'll get a new hood to... :rant: i'm also leaking coolant... looks like it might have taken out my radiator... not sure yet... i'll look after work...
i'll get more picts after work... it's kind of shitt out today...
or......... both. :kick:Quote:
Originally Posted by ZAPFOOL!!
just retarded... nothing out the the ordinary there...Quote:
Originally Posted by DanWS6
Damn, and I thought mine were bad...Quote:
Originally Posted by Spaz
had to wait untill the fucker cooled down enough to take my shop rag (i'm at work don't want to get oil all over) and pull that bitch out of my hood... looks like i'll get a new hood to... :rant: i'm also leaking coolant... looks like it might have taken out my radiator... not sure yet... i'll look after work...
well... that one was sticking out of my hood... i'm not sure how many others are bent...Quote:
Originally Posted by 86 IROC-Z
lol ! No way, those msut be pics from your other 4 engines blowing up !
sadly no...Quote:
Originally Posted by eddielb
#1... i'm at work... i don't have any pictures of them on my work PC...
#2... the PC at my home doesn't even have the old pictures on it cause i put my fist through it...
#3... the old hard drive from my PC doesn't mate up to the ports in my new PC... completely different plugs... new hard drive is a little bigger than a credit card and about a 1/4" thick... old hard drive is classic style...
sorry to hear that man... maybe your car is playing a april fools joke on you... and accidently :bomb: up...Quote:
Originally Posted by Spaz
Damn ! You got a warranty w/ that engine? How the hell did it blow up !
i'm not sure if the warrenty is still good or not.. it's been over a year... i'm waiting for an e-mail back...Quote:
Originally Posted by eddielb
i pulled in to the parking lot and floored it aiming my car tword another employee to scare them... "rrrrrrrrRRRRRBOOM!!!chatter chatter tink hammer hammer... "
where they scared ?
:sulk: i will buy your intake manifold from youQuote:
Originally Posted by Spaz
yeah... more scared at how pissed i was than anything...Quote:
Originally Posted by Danger731
:werd: i got to see what is going on first... i doubt the engine is salvagable at this point... i'm still waiting on my e-mail...Quote:
Originally Posted by shady milkman
salvageable? i doubt if you threw a rod that to much will be salvageable..besides the intake :mel:Quote:
Originally Posted by Spaz
oh fuck bro sorry to hear that...
Hey I have a 6.0liter iron block w/rotating assembly, that I was going to use for a f1 procharger build. I decided to go LS3 instead
I will ship out to you $200, I know you are good for the cash!!!
:faint: omg..so you would need all valvetrain... heads and cam to make it complete right?Quote:
Originally Posted by ibanez7
Damn Spaz mate, hard on the gear eh?
They reckon that cows can have a heart attack at the abbetior due to freaking out at the smell of death of the cows slaughtered ahead of it. Maybe Spaz's engines have the same tendencies when dropped into his engine bay of death??
And just in case, happy April Fools Spaz... :lol:
Quote:
Originally Posted by shady milkman
its the 6lt from a silverado.. and yeah it just needs cam and heads.
the L92 head and intake would work great.
fuck... sweet thanks jason!!! i'll give ya a call after work... :DQuote:
Originally Posted by ibanez7
np sounds good...Quote:
Originally Posted by Spaz
hopefully some more members can add to the parts and get you going again fast
:werd:Quote:
Originally Posted by ibanez7
MAYBE THATS THE PROBLEM... i think someone needs a VTTTTEEECCC swap !!!Quote:
Originally Posted by ibanez7
:lol: no!!!Quote:
Originally Posted by eddielb
Ed has a parts car in his garage.Quote:
Originally Posted by ibanez7
Ed also has car parts in orbit... :lol: :wall:Quote:
Originally Posted by Danger731
you must drive that thing to the grounddd
:bino: it's a bad habbit...Quote:
Originally Posted by tigersport14
You need a new engine builder/mechanic
lol... last motor was a crate LS6...Quote:
Originally Posted by MagicMan
/driverQuote:
Originally Posted by MagicMan
:yup:
:haha:Quote:
Originally Posted by DanWS6
:lmao:Quote:
Originally Posted by DanWS6
that sucks spaz you need a Dragster motor...
i need a good shave to...Quote:
Originally Posted by 2000SuperSportMaro
nm you would find someway to blow that up...
Rebuild every pass??Quote:
Originally Posted by 2000SuperSportMaro
Spaz is already rebuilding every 5K miles.
i figured out what i'm dong... i'im getting the 6.0 from ibanez7 and throwing that together to get my car up and running... will cost me about $2000 or so all said and done... (just needs L92 heads and intake...)
then... i'm going to order a LSX bowtie block and bore and stroke to 500 cuin... swap over the L92 heads and intake to that (once it is done) and toss that puppy in there... :woo:
lsx block..if you could find one..also i hear they have been having problems with the blocks splitting during manufacturing..damn and those things are expensiveQuote:
Originally Posted by Spaz
LSX Bowtie Block 19166454Quote:
Originally Posted by shady milkman
Availability: Call for availability
SKU: 19166454
RETAIL: $2,600.00
YOUR PRICE: </B>$2,145.00
WTF - I thought for sure this was an April fool's joke - your engine luck sounds like the engine/transmission problems I had with my '72 Chevy pickup years ago........3 engines, 5 transmissions - and yes, I rodded the life out of that thing, had a lot of fun, and learned a lot!
:lol:
Good luck with the 6.0 ltr swap out - sounds like a great deal to get you rolling again!
call them and see. i bet they are on backorder :yup:Quote:
Originally Posted by Spaz
Then it's just you. Do you not maintain them at all or what? Jesus!Quote:
Originally Posted by Spaz
And where are you getting the money for all these new motors?
;) i'll get in...Quote:
Originally Posted by shady milkman
doing his thing on the corner..duhhhQuote:
Originally Posted by MagicMan
Pill-pushing? :lol:Quote:
Originally Posted by shady milkman
i maintain them like they shoud be.. i change the oil every 2,600 - 3,000 miles... the trans fluid every spring and then again in the fall... the rear i change once a year... fuel filter i change ever other oil change... injectors i get cleaned once every 2 years... plugs i check and change as needed while i do my oil (cause i hate sitting thre watching oil drip out... i have to constantly be doing something)...Quote:
Originally Posted by MagicMan
So then you can't drive :spit:Quote:
Originally Posted by Spaz
What is the difference between a rod and a pushrod?
And what the hell were you spinning it to?
oh i believe you..but i am pretty sure they are having problems with the manufacturing processQuote:
Originally Posted by Spaz
ok
I'm going to call bull shit on this one
unless you have already torn the engine down there is not much of a way for the push rod to make it all the way out of the engine
happy April Fools day
Damn sorry about that Spaz! LS2 or LS7 next???
we need a cell phone pic of that hood.....or else this is bullshit! :bs: :lol:
:slap: it was blown through the valve cover and in to my hood... don't ask me how cause i don't fucking know... all i know is it happened and now i don't got my damn car for a while again... :brick: :rant: :cuss:Quote:
Originally Posted by Darren P
i don't have a camera on my crappy phone...Quote:
Originally Posted by FasstChevys
and every one is getting all pissy cause i keep going out there to look at it so i got to back off for a bit or them clowns will start crying to my dad (the boss/owner)Quote:
Originally Posted by FasstChevys
well bud.........for your sake, I hope this is an April Fool's joke.........Quote:
Originally Posted by Spaz
you work for your dad ??
:( i wish it was...Quote:
Originally Posted by FasstChevys
yup...Quote:
Originally Posted by 2000SuperSportMaro
i remember last time an engine Popped on spaz!
this time with the 6liter, the engine should last...
:werd:Quote:
Originally Posted by ibanez7
Iron > aluminum... :rant: i'll take 60 more lbs and more reliability no problem...
The block isn't your problem. :lmao:
I believe you but you stated you dont have a camera on your phone and cant take a picture of the hood. How did you get tihs picture then?Quote:
Originally Posted by Spaz
had to wait untill the fucker cooled down enough to take my shop rag (i'm at work don't want to get oil all over) and pull that bitch out of my hood... looks like i'll get a new hood to... :rant: i'm also leaking coolant... looks like it might have taken out my radiator... not sure yet... i'll look after work...
:nilly: http://i132.photobucket.com/albums/q...funny/GTFO.gif :lol:Quote:
Originally Posted by Mr. Luos
i need to stop dumping clutch at 5,000 rpm to...
a pos poloraid camera in the shop (had to scan and enarge the picture on the copy machine here)... it might have more film but once work lets out i'm going to get my digital camera and some better lighting... don't worry... i'll get you your picture...Quote:
Originally Posted by redls1
spaz what do you do?? your dad own the company??
Do you pay for all the engines you go through or has insurance paid anything?
Quote:
Originally Posted by redls1
fuck having the insurance pay for that shit!!!Quote:
Originally Posted by redls1
the first two engins were under warenty... one i bought from e-bay for $1,400... the other LS1 and LS6 i bought...
i'm a special products coordinator... he owns a moving company... :DQuote:
Originally Posted by 2000SuperSportMaro
haha ya my dad owns the insurance company and i am one of his lower agents... and high than his other agents... quite nice but can be a hassle because i see him at all the time in town and at work...
not to be an ass but how does one go about destroying 5 engines???
yeah... it's a pain in the ass cause every one watches what you do... :nilly:Quote:
Originally Posted by 2000SuperSportMaro
.
]
:lol:
knew it... geeze spaz...Quote:
Originally Posted by Spaz
Quote:
Originally Posted by BULLET_WS6
:bow: :lol:
Quote:
Originally Posted by Spaz:nilly::lol:
i need to stop dumping clutch at 5,000 rpm to...
I like that move too! It works oh so well!
Damn sorry to hear about the engine. That sucks but you will like the Fe block. :yup:
no Fe for me yet packy... :) i april foolsed every one... :DQuote:
Originally Posted by Packy
Clown! :)
i'll be damn :kick:Quote:
Originally Posted by Spaz
:D always...Quote:
Originally Posted by Packy
:haha:
the 6liter block rotating assembly for $200 should have been the give away, plus shipped from IL
I just saw it after my post went up! That is good! I got my platoon good today when they came into the Bn. this morning I had a Mission/Op Order up for them and a timeline to insert them tonight by 2359! :) I let them go until right after lunch with their planning and then I told them when i was giving them an update that it was an April fools joke! I am such a dick!
:lol: add another 0 and a shit load of luck maybe... :lmao: :DQuote:
Originally Posted by ibanez7
WAIT.
This was a joke?
WHAT THE FUCK?
I don't get it.
i banged spaz's mom
:haha:Quote:
Originally Posted by Packy
:lmao: :lol: :dance: :nana: :woo: :rotfl:
where is my child support daddy!!!Quote:
Originally Posted by MagicMan
in my anusQuote:
Originally Posted by Spaz
:lol:
