Name what you want on sale or on GP and I will try to make it happen.
Thanks
Kentucky Speed
Printable View
Name what you want on sale or on GP and I will try to make it happen.
Thanks
Kentucky Speed
Not sure if you have them or can get them , but i was looking for a good deal on some koni sa shocks.Quote:
Originally Posted by FRCBobby
Im looking for a deal on SLP headers y-pipe and converters. What can you work out for that shipped (60050)?
msd opti and coil
torque arm like the edlebrock prcie range
or if no gp can you just pm me a price on those if you can get em...
Bobby, you could have my money on MSD spark plug wires. I know they're a low-price item, but most people could use a set.
Oneslow: you don't want SLP headers. They're notorious as being the worst F-body headers made. See if Bobby can hook you up on a good set of headers.
PM'd price on headers and yes I can also get you several other types of header.
N4cer, shoot me a pm and I will hook you up with the MSD's
how bout good electric cut-outs?
I can get you the QTP's how many and what size are you looking for
im lookin at gettin 2 for like 2.5 inch
What are the problems with the headers? What would be other suggestions if those dont work and what are the performance numbers on them?
+1 There are enough members running the LTx based engine for this GP to fly!Quote:
Originally Posted by dafaic
^ thanks for the support ^
So you are wanting the MSD opti as well??Quote:
Originally Posted by SexOnWheels
I will be calling distributor tomorrow to see the best deal I can work out on them and hopefully we can get something going.
If this is one you would want spread the word and see how many we can get.
Thanks
Bobby
Can I get a price on Coated Pacesetter LT's and ORY? Maybe some o2 sims as well? Thanks.
+1 on a single QTP 3" motorized cutout with metal cutout piece
What kind a deal can you get me on SLP LS6 intake (egr provisions). Pm me price please.
I would love to see a GP for subframe connectors. Every F-body can use them and would be beneficial.
Can do the UMI or the Spohn with free shipping if interested.
another one for the MSD opti for 95 LT1
i might could also use a new coil and maybe thinking bout OTVC wires if you can get them.
Thanks
got my opti and coil in Yesterday! Man what a nice piece the msd opti is!!! Thanks FRC!!!
How about Hal QA1 Single adjustables and springs for front and rear?
You never replied about the SLP LS6 intake with egr.
Sorry for not replying, I must have overlooked the previous post.
PM sent.
thanks for looking into it for me.
No problem.
How about a real good deal on a Pro 5 shifter with the option of Lou's short stick and possible a custom handle (shift knob)? Ebay always has it starting for about $154 with buy now option of about $165. Somehow lower than the first number should help create a lot of interest.
i could use a price on QTP long tubes with AIR and a catted y pipe thanx!
im lookin for edelbrock shorty headers, for the ls1...you got a price on that?
Shock Tower Brace: UMI, BMR, or Spohn.
Sorry but at this time I don't carry the Pro 5.0 shifter
Bandit1, the QTP's would be $799 shipped
transws6am00, PM'd you
Mentos Charge, UMI STB $80 SHIPPED
UMI Chrome Moly STB $100 SHIPPED
or
SPOHN STB $85 SHIPPED
APOHN Adj. STB $125 SHIPPED
Any luck on the Hal QA1's?
+1Quote:
Originally Posted by dafaic
+1Quote:
Originally Posted by 94z28l
thanx for the price bobby....i asume that doesnt include the catted y??
pocheasy, you have a message
Bandit1, no doesn't include the catted y
+1 on Hals or Konis
nx nxl system???
This was already done. Maybe you can get in on it anyway.Quote:
Originally Posted by linegtdt52
What about ls1- ls6 conversion?
need an intake SLP or K&N Not sure which is better. preferably, intake and filter.
10-bolt rear differential covers?
Can you get me a price for this flowmaster muffler part # flo-325108. Thanks in advance
PULLIES! :D and LS6 intakes!
I would be up for a pulley purchase also
+1 on UMI SFC's Boxed 2pt or tube 3pt
Quote:
Originally Posted by wil2kss
+1 on Koni s/a's
+1 on diff cover.... looking for some 17x9.5 and 17x11 Chrome Zr1's alsoQuote:
Originally Posted by EvilCamaroSS
What about panhard adj.
need driveshaft
STRANGE S60 with a 3:73 non asr +abs that will bolt in
and also a single QTP 3" motorized cutout with metal cutout piece
also looking for a Corsa exhaust............
pm me a price on an ls6 oil pump if you can get it please. thanks, nick.
Hotchkis Black Strut Tower Brace and I'd do the pulley too!
please PM me a price on the QTP Electric Cutout (just the valve that bolts on, don't need the actual cutout, I already have one welded on)
Thanks!
no help on this thread. I havent had anyone let me know a price on shit. What about anyone else?
+1 on koni sa's
I'm trying to find the best price possible on a clutch kit (disc/pressure plate) for my 01 Formula M6, I want a decent street/strip package, and it is my daily driver. please pm some shipped prices to 65109 :)
Anyone doing a BMR GP or Autometer GP?
what price can you get on the qtp headers and double cutout y pipe, also i live in kentucky and where are located and do you have a store.
got minor mods to the car it's pushing approximately 350 RWHP looking for a good clutch it's a daily driver don't want chatter! Shipped to Fredericksburg 22405.
what about a group purchase on a strut tower brace?
what price can you get on coated pacesetter long tubes with EGR and a off road Y for a '99 Z28?
What about a GP for some #42 Injectors?
Bill
:seesaw:
what can you do boxed subframe connectors, torque arm (one that relocates from the tail shaft), timing chain, oil pump anf fuel pump for?
Sorry guys, haven't been on here in a while and didn't get anything letting me know there were new replies. I am starting sending prices now.
Again, Sorry for the delay.
+ 1 on Koni SA's.
how about some con. rods
If this is still going on...........
Bolt in subframe connectors perferr the 3 points but will take the straight ones.
LCA with relocation brackets
Electric water pump
Thank you.
I know this is an old thread but I need the following;
BMR K-Member model 003
60 or higher LB injectors High Impedance
High load Valvespring kit with Titanium reatainers, seals, and locks (ie... comp cams 26921-kit)
hardened pushrods(maybe with the above valvesprings if in a kit)
eboost 2
Let me know by email phone or pm asap.
Thanks
You have a PM with my contact info.
Email Sent fil131
I dont see the email, please resend to [email protected] or PM me
PM sent
Can I get a PM for post #65
msd wires and tr55 plugs? maybe tr6 plugs?
how about dual fuel pumps? Racetronix or otherwise.
Thanks
Fil131
I'm looking for stainless steel headers, don't care about brand really, just price.
looking for a Strange Dana 60 complete with 4 channel, locker or tru trac, 4.30 gears with shipping
QTP Headers or Kooks...
can i get a price for coated pacesetters w/a catted y-pipe? thanks!
If i could get a pair of 02 sensor extensions and preferrably boxed sub frame connectors or 3point tubular SFC's that would be awsome..let me know what we can work with on prices
how bout the crane cams valve spring compressor?
would love a good price on a electric cutout shipped to 27606, both for 3" and for whatever the size is before the axle is, not sure if I will bother with a catback if I am going to do a cutout. and not sure where I want to put it. thanks
im lookin for a good price on a ws6hood/raised air box.. is that possible?
prices on dual QTP 3" E cut outs, SFCs and short throw shifters??
What are your best deals on:
Hooker LT Headers (stainless-ceramic coat)
ORY pipe
LS6 intake
Air Lid
Hotchkis Strut tower brace (or other)
suspension kits?
I wanted to stay NA, but now want to work up to a turbo setup in the future, any suggestions/additions for my mod plan?
Thank you for your time.
:usa:
Interested in Pacesetter LT and Ls6 intake here
Cam packages, Ls6 or typhoon intake,
Hey we can take care of you on those.
What type of cam package would you be intersted in?
Bobby
Need LS6 intake.
what about ls2 timing chains, ls6 oil pumps and underdrive pulleys?
how bout fast lsx90mm intake manifold with 90mm nick williams TB?
Guys I will work with my dealer on the GM parts to see what we can work out.
basballny you have a pm
Is it too late to get them deals?? If not what are some prices on some underdrive pullys and cheap but not thrash headers... Thanx!!
PM'd you thugtilidie18
I need some info on SLP cat-back, LM1 or 2. Tell me what you can get on camshafts too.
so what kind of deal was on the underdrive pullys?
pacesetter LT's and Y-pipe? Coated or black
Riceater $425 Shipped for the Fbody SLP LM1 or LM2 exhaust
kebie05 the SLP pulleys are $225 Shipped
pacesetters uncoated are $295 Shipped coated are $425 Shipped, then add the y-pipe for $135 Shipped
Also, riceater yes I can get camshafts as well, I can get a wide selection of off the shelf cams as well as custom cams. PM me to let me know more specifically what you would be looking for.
thanks
Any Deals on True Duals?
How About Some Solid Motor Mounts And A Poly Trans Mount
Pacesetters......99 T/A
No true dual setups offered right now.
pacesetters uncoated are $295 Shipped coated are $425 Shipped, then add the y-pipe for $135 Shipped