Printable View
Alright, this question may seem ridiculous, but some car enthusiast once told me that the Fram oil filter for F-body's is bad. This kind of scared me, because that’s what I am currently running in my car. So is there any truth to this statement at all, or is this guy just a moron? And on that note, when running synthetic oil (Mobile 1) is it necessary or beneficial to run a synthetic oil filter?
He told you that because in most every oil filter study Fram filters are always among the worse, if not THE worse oil filter that money can buy. Without getting to deep into it, OEM filters are better than most.
More info at Bob'stheoilguy.com
run from FRAM, run from FRAM now, as fast as you can!!! :scare: no, dont look back, keep running...
infact run from everything FRAM in general, oh god, i hope this gets to you in time... :Ohno:
FRAM Oil Filters are horrible. if anyone thinks about using them why dont you crumple up a piece of paper and use that as a filter instead. particle stoppage and flow through FRAM filters are horrible. i do not reccommend at all.
Back in the day (whenever that was) supposedly fram stuff was top notch, but nowadays they are the worst. Get an ACdelco oil filter, your motor will thankyou :yup:
Why is it this seems like a recent deal? I've been reading and hearing about Fram being junk a lot lately. I've used them my whole life and always thought they were fine...until recently. It seems like a lot more people that are smarter than me are saying Fram sucks. My last filter I bought was an ac/delco so I guess I'll keep it that way but it just seems weird how much I've been hearing this lately.
Wow, I def. need to get that fram outta there. But do u think it is bad to the point that i need to pull it out before my next oil change. I have about 2000 more miles left to go before my next change, and i do not really drive that often. Should i just change the filter now, and replace the oil that came out of the filter, or would it be "ok" just to finish up this round of 3000? (and then never look back to Fram ever)
Well, it's like this...when I was working for a Mazda Dealer as a Service Manager, we got a bulletin that said " don't ever use a Fram filter,...if an engine failed of a lubrication problem and it was found to have a Fram filter, the warranty claim would be denied"...This was back in the eqrly 90's.
That was the 1st time I had ever heard anything bad about an oil filter of any kind.
Fram used to be a good filter but things change. Now there a price point in Wal-Mart. Here is a site that might help you decide.
http://people.msoe.edu/~yoderw/oilfi...lterstudy.html
What they all said.
Man this is why I love this place because I have the FRAM I thought it was top notch due to the grip the put on the filter heh heh... Out mine comes as well. It would be interesting to get a representative from Fram on here to see what they have to say. And an expert at that not some corporate sales person who responds the same way to every complaint about there product. I'd like to get them "involved" without having them just have a lawyer who says cease and desist all conversation bashing our product.
Fram filter....bottom of the list.
I use ACDelco filters on both my GM cars.
Fram? Oh, wait....just seeing that name makes me :Puke:
NAPA gold made by wix! Or ACDelco! Fram looks like toliet paper inside cut one open and put it in the bathroom.
Fram is FTL. Get the Delco.
Go to the Bobistheoilguy web site & learn all you need to know about oil, filters,...etc.. Many of us use the long k&n hp2006 oil filters with great success. Others mentioned above (not Fram) have also tested well. I hear that in Texas, using a Fram oil filter is punishable by castration. :dunno:
AC Delco factory filters are good. Personally, I use a K&N and sleep better at night. I pay about $15.00 for the K&N. FRAM internals have cardboard peices where most other filters are metal. It's been said the cardboard sometimes comes apart. Why take the chance with an investment like your car? Def run from FRAM products.:Ohno:
Just changed my oil for the first time in a 99 Z. I used Mobil 1 Syn 5w30 and an AC Delco Duraguard filter. Just got my shop manuals and it says use an AC (PH? I can't remember the alphas as I write this) "44", but in the parts store catalog it was a "46". I bought the AC Delco 46 and it seems to be correct. Fit fine, no leaks. Just curious if the 44 is OEM (Chevy dealers) and 46 is aftermarket stores.
Does anyone know the difference between the 44 and 46 and if it is anything with some filter upgrade or what? I certainly realize the correct filter has to be used, but the Auto Zone book did say a 46 for a 1999 5.7 Camaro.
Just curious.
John
P.S. It is SO much easier to change the oil on the LS1 than a 94 4.6 Thunderbird!!! I think Ford put in overtime to make that oil filter as difficult as possible to deal with.
PF-44 is the number. I know also the PF 58 and a PF 59 will work(longer). I don't know what a 46 fits.
Thanks for the info. Well I can tell you that an AC Delco Duraguard PF46 does indeed work with the LS1 in a 1999 Z. It had a Carquest ?? 4006 in it, and the two filters were identical to my eye.Quote:
Originally Posted by HAWKNYU
It works fine and it is the catalog'ed number. I don't think Auto Zone stocks the PF44.
John
Ive been using the PF46 for a while now
In the ensuing years things have changed. Delco changed to a cheap paper filter and FRAM came out with the EXTRA Guard line of synthetic filters. Now the Delco is garbage, and the FRAM is actually one of the best rated filters on the market today - but only the EXTRA Guard line. The EXTRA Guard line has no paper components - all plastic and rated for longer periods. I change mine at 5k miles with full synthetic oil. The PN for the standard length filter is 3506.
I use Redline when I can get it and Royal Purple when I can't. Both seem to be first rate.
Regards,
Darden
I have no problem installing the high end Fram Ultra oil filters on any of our cars these days. I shy away from the base filter and the Extra Guard though.
I put Mobil 1 5w30 in my car, not knowing what it may have had in its past. The oil filter I initially took off had no name at all on it, but it was yellow. That scares me enough. I match my mobil 1 with the mobil 1 m1-107 filter. I usually go with Amsoil oil and a Pure 1 filter on vehicles i'm unsure of. Except Ford, I stick to Motorcraft oil & filter. But I needed a quick oil change and was at Walmart, and beings GM recommended it in the LS1 vettes, why wouldn't I.
I have no issues using any type of FRAM filter (air, oil, fuel) on a car that doesn't get raced, or a heavy duty truck.