Garage Cleanout

Printable View

06-03-2011, 03:50 AM
ls1camino

Garage Cleanout

Everything came off of my 2000 Trans Am WS6 M6, unless otherwise stated.

Prices do not included shipping or 3% paypal fees. All parts are OBO!!!

My PM box is almost full, so feel free to email me @ elcam1985@yahoo.com

Stock Parts:
F-body T56 Transmission - $1000
F-body T56 to LSx Aluminum Bellhousing - $100
F-body Clutch Slave Cylinder (x2) - $25
F-body Clutch Master Cylinder (x2) - $100
F-body Aluminum Driveshaft, no u-joint - $150
LS1/6 Timing Cover w/ brand new gasket and Crank Seal (less than 50 miles) - $75
LSx Camshaft Retainer Plate (x2) - $25 each
LS1 Valley Cover - $25
LS1/6 Timing Gears and Chain - $25
LS1 Block...bought to make into a 383ci LS1 - $200 (prefer local pickup)
LS1 Main Caps w/ bolts (x2 sets) - $100 a set
LS1 Crank - $175
Full set of stock rockers, pedestals, and bolts - $100
853 Heads w/ Valves and Springs (77k miles) - $150
Black Powdercoated Valve Covers...powdercoater failed and coated the threads for the brackets...bolts broke off in threads...probably a good candidate for a custom shaved job - $20
Power Steering Rack w/ Inner and outer tie rods = $100
WS6 Front Sway Bar - $50
F-body Radiator - $50
Stock Radio - $20
Windshield Washer Fluid Tank - $25
Full Set of used Head Bolts (x2) - $20 a set

Performance/Aftermarket Parts:
7.400" Comp Cams Hardened Pushrods (less than 10 miles) - $100
Katech C5R Timing Chain (never used, still in bag) - $125
Black Edlebrock On-Car Adjustable Panhard Rod (less than 1k miles) - $75
Black Hammertone BMR On-Car Adjustable Xtreme Lower Control Arms (less than 10k miles) - $200
Eibach Pro Kit Front Springs & KYB Adjustable Front Shocks (assembled) - $300

Nitrous Parts:
Timing Tuner (instructions included) - $200
NOS brand Bottle Brackets (x2 sets) - $25 each set

Other:
Salad Shooters...16x8 wheels (no tires) from a Camaro (I used them for a short time as my drag wheels) - $50
06-03-2011, 09:57 AM
y2kmaroonz

I'll take the valve covers at $40
06-03-2011, 10:35 AM
pajeff02

Silver/Chrome Katech Tensioner (less than 50 miles) - $100

^^ Interested. Does this just bolt in place of the stock tensioner? Bolts come with kit or use stockers?
06-03-2011, 12:34 PM
98TransAmWs-6

Do you have any pictures of the c5r timing chain and the valve covers?
06-03-2011, 04:43 PM
ls1camino

Quote:

Originally Posted by y2kmaroonz

I'll take the valve covers at $40

Paypal = elcam1985@yahoo.com

After Shipping and Paypal it will be $50.

Quote:

Originally Posted by pajeff02

Silver/Chrome Katech Tensioner (less than 50 miles) - $100

^^ Interested. Does this just bolt in place of the stock tensioner? Bolts come with kit or use stockers?

Yes, stock location...yes, stock bolts.

Quote:

Originally Posted by 98TransAmWs-6

Do you have any pictures of the c5r timing chain and the valve covers?

http://i65.photobucket.com/albums/h2...o/SUNP0055.jpg

Top of powdercoated and bottom are painted.
http://i65.photobucket.com/albums/h2...o/SUNP0036.jpg
06-03-2011, 06:01 PM
pajeff02

Having installed and used it for 50 miles what did you think about that style tensioner?
06-03-2011, 06:11 PM
ls1camino

Quote:

Originally Posted by pajeff02

Having installed and used it for 50 miles what did you think about that style tensioner?

I liked it...granted you can't just install it and forget about it, you have to check it every so often. I bought it because my stock style tensioner threw the belt off at 130mph.
06-03-2011, 06:21 PM
pajeff02

Quote:

Originally Posted by ls1camino

I liked it...granted you can't just install it and forget about it, you have to check it every so often. I bought it because my stock style tensioner threw the belt off at 130mph.

Sold. I am not a PayPal person so PM me what to do. We're in Beaver Springs this weekend, but will be home Sunday by noon. If I can make a payment to your account with a credit card, I will do it that way.
06-04-2011, 06:28 AM
ls1camino

Front Accessories, Painted Valve Covers, Katech Tensioner, and Lean Shut Down Switch have all been sold.
06-06-2011, 01:08 AM
ls1camino

TTT
06-06-2011, 03:00 AM
pajeff02

Just realized that my car will soon have a little bit of "Nymph" on her. :D
06-06-2011, 03:02 AM
BLK2KSS

is everything included with the purge kit?
06-06-2011, 09:55 AM
ls1camino

Quote:

Originally Posted by BLK2KSS

is everything included with the purge kit?

Yes, bu someone else is in front of you for it, pending payment for 24 hours...I'll let you know if it falls through.
06-06-2011, 09:57 AM
ls1camino

Quote:

Originally Posted by pajeff02

Just realized that my car will soon have a little bit of "Nymph" on her. :D

Good for 50hp :lol:
06-06-2011, 10:26 AM
BLK2KSS

Quote:

Originally Posted by ls1camino

Yes, bu someone else is in front of you for it, pending payment for 24 hours...I'll let you know if it falls through.

gotcha... thanks
06-08-2011, 05:08 AM
ls1camino

To The Top.
06-08-2011, 08:09 AM
Nick2000 Z28

Pm sent about hooker exhaust
06-08-2011, 08:10 AM
pajeff02

Tensioner just arrived at the office.

Thanks, J !
06-12-2011, 06:04 AM
ls1camino

To The Top.
06-12-2011, 10:32 AM
BLK2KSS

did you get my last pm?
06-12-2011, 11:18 AM
ls1camino

Quote:

Originally Posted by BLK2KSS

did you get my last pm?

No, sorry...is it still in your sent items?
06-13-2011, 10:47 PM
BLK2KSS

Quote:

Originally Posted by ls1camino

No, sorry...is it still in your sent items?

:thinkin: no its not... i even sent it twice. idk?
06-14-2011, 01:45 AM
98maro

$100 for the ls1 block??
Man I would buy it, but to far :(
06-14-2011, 11:45 AM
BLK2KSS

new pm sent
06-14-2011, 09:09 PM
BLK2KSS

payment sent for purge kit...
06-24-2011, 06:43 PM
ls1camino

Bumpity...
06-29-2011, 08:11 AM
moe682000

Would you happen to have an oil pan, pickup tube, and windage tray?
07-07-2011, 03:53 AM
ls1camino

Bump :D

Quote:

Originally Posted by moe682000

Would you happen to have an oil pan, pickup tube, and windage tray?

Yes, but I'm using them on the new motor, sorry.
07-13-2011, 03:58 AM
ls1camino

To The Top
07-14-2011, 06:43 AM
jdoyle

damn i want that block. if only u were in texas...
07-14-2011, 04:33 PM
Thackdaddy43

What condition and what is all done to the heads.
07-16-2011, 05:51 AM
ls1camino

Quote:

Originally Posted by Thackdaddy43

What condition and what is all done to the heads.

Stock...took them off when I did my Head/Cam/Intake swap.
07-18-2011, 12:09 AM
chief98ls1

Black Edlebrock On-Car Adjustable Panhard Rod (less than 1k miles) - $75
is this still for sale><??
07-18-2011, 01:57 AM
ls1camino

Quote:

Originally Posted by chief98ls1

Black Edlebrock On-Car Adjustable Panhard Rod (less than 1k miles) - $75
is this still for sale><??

Yes.
07-18-2011, 03:34 PM
Thackdaddy43

Are those 6.0L heads and will they bolt right up to an LS1
07-19-2011, 05:20 AM
ls1camino

Quote:

Originally Posted by Thackdaddy43

Are those 6.0L heads and will they bolt right up to an LS1

They're stock LS1 heads, so yes, they'll bolt up to an LS1.
07-19-2011, 09:00 AM
jdoyle

any idea on how much it would be to get that block to hutto, tx 78634?
08-01-2011, 08:31 PM
ls1camino

Quote:

Originally Posted by jdoyle

any idea on how much it would be to get that block to hutto, tx 78634?

Probably not worth it.
08-02-2011, 12:55 PM
jdoyle

werd
08-19-2011, 03:02 AM
BLK2KSS

Hey man, thanks again for the purge kit. I finally got it installed and it works great! I left you positive trader feedback too. :thumbup:
08-19-2011, 04:40 AM
ls1camino

Quote:

Originally Posted by BLK2KSS

Hey man, thanks again for the purge kit. I finally got it installed and it works great! I left you positive trader feedback too. :thumbup:

I'm glad. I'll leave you a trader notification as well. Thanks :)
08-24-2011, 07:49 PM
derekbuckner1

haven't heard from ya in a while. do you still have the catback? still looking for the story on the cutout. thanks
08-24-2011, 09:39 PM
Spikito

how much are those rockers new?
09-07-2011, 08:45 AM
NavyTATwo

Do you still have the pushrods? Thanks.
Scott
09-07-2011, 11:45 AM
ls1camino

Quote:

Originally Posted by NavyTATwo

Do you still have the pushrods? Thanks.
Scott

Yes.
09-21-2011, 06:47 PM
ls1camino

Updated original post with new stuff.
09-23-2011, 02:59 AM
therel82

Are you selling the door panels, and the driver and passenger seats?
09-23-2011, 03:45 AM
ls1camino

Quote:

Originally Posted by therel82

Are you selling the door panels, and the driver and passenger seats?

No, sorry. This is not a car part out, just a garage cleanout of parts I don't need anymore.
10-06-2011, 10:29 AM
Streax

What condition and brand are the slave cylinders? If OEM and relatively new I am in for one!
10-06-2011, 11:15 AM
ls1camino

Quote:

Originally Posted by Streax

What condition and brand are the slave cylinders? If OEM and relatively new I am in for one!

Stock...just sold my 77k mile one. The other is of unknown mileage but is in better condition than the 77k mile one was.
10-12-2011, 08:43 AM
98TransAmWs-6

Is the Katech c5-r timing chain, clutch slave/master, and bell housing still available? I may be interested in the t56 as well.
10-12-2011, 09:07 AM
ls1camino

Quote:

Originally Posted by 98TransAmWs-6

Is the Katech c5-r timing chain, clutch slave/master, and bell housing still available? I may be interested in the t56 as well.

Timing Chain and Hydraulics are still available.

Bellhousing and T56 have been sold.
10-12-2011, 10:51 AM
98TransAmWs-6

Quote:

Originally Posted by ls1camino

Timing Chain and Hydraulics are still available.

Bellhousing and T56 have been sold.

Alright PM sent.
10-15-2011, 06:08 AM
Spikito

so the rockers are gone?
10-16-2011, 02:34 PM
ls1camino

Quote:

Originally Posted by Spikito

so the rockers are gone?

No, I've still got a stock set.
10-16-2011, 02:42 PM
Spikito

oh i was thinking you had a harland sharps set
10-16-2011, 07:59 PM
ls1camino

Quote:

Originally Posted by Spikito

oh i was thinking you had a harland sharps set

Yeah, I did, and they sold. Sorry for the confusion.