alot of stuff including pacesetter headers in box.

Well I have a lot of stuff left over from the v6 to ls1 swap, and then including all the mods I did, I have a lot from it. Everything I am listing is obo, so make an offer, I am willing to go down more if it is a pick up, if you need it shipped then you pay the shipping. All the parts are at my parents’ house in south Lyon, but I'm going to school in Big Rapids (Ferris). I would be willing to meet someone an hour away of either place as long as you give me time to go home. I don’t have any pics on my computer, but would be willing to if you need me too. Please note though if you do want pics I would have to get my dad to take them so it might be a day or two. I would consider trades on anything or a combination of things, I will list stuff I am looking for below. Like I said before I am really willing to talk about prices, I always want to help another car lover out, also I'm just trying to live as a college student, but please don’t make it insulting.

misc.
-2 Bridgestone Potenzas 295/30/18 around 30% tread left. $40.00
-98-02 red non-ram air (stock v6) hood good condition. $80.00
-Rksport smoked headlight and taillight covers. Good condition but used. $60.00 (cost $140 new and together) or $35.00 each separate
- 2 10inch pioneer 500w subs (ts-w250r). $30.00 *SOLD*
-trans-go 4l60e shift kit. Still in box. $50.00 ($85.00 new)

ls1.
-98-02 ls1 stock intake. $35.00
-Professional Products Basic fuel rail kit never used (didn’t fit my needs still in the box). $60.00 (cost $100.00 new) *SOLD THANKS STEVECZ28*
-stock valve springs good condition. Make me an offer. I have no idea what to charge
- 04 corvette camshaft. 12565308 204/218 .555/.551 117.5. This would only be an upgrade for 98 and 99 f-bodies I believe. $80.00
-98-02 stock water pump. $35.00
-93-02 driveshaft 1 piece. $50.00
-04 corvette fuel rails, non-return style. $80.00
-2 used oxygen sensors and harness. $10.00

v6.
-99-02 v6 coated pacesetter headers brand new still in box, engine spun bearing before I could put them in. never used. $300.00 ($350.00 new)
-98-02 v6 camaro radiator. $10.00
-v6 stock airlid. $5.00 (talk to me about painting and/or airbrushing it for an extra charge)
-2000 v6 ecu auto, with trac control. $35.00
-2000 v6 camaro cluster with 9x, xxx miles. $20.00
-drive by wire v6 pedal assembly. $10.00
-msd 8.5mm msd spark plug wires. $25.00 *SOLD*

well there is my list. The trades I am looking for are stage 1 cnc ported heads, or a wet nitrous kit, and any performance suspension parts other then sub frame connectors (already have those). Since I know nothing on this list is worth those, I would obviously add a couple of things or cash. My cell might be a lot easier to reach me on since I always have it on me. The number is 734-216-9116. So make offers. I have unlimited text so feel free. or call me with any questions.

pics of fuel rails please...also are they bolt on and go, or will i need the extra fittings and what not to install on my car??

interested in headers ill get ahold of ya in a little bit

Quote:

---

Originally Posted by SteveCZ28

pics of fuel rails please...also are they bolt on and go, or will i need the extra fittings and what not to install on my car??

---

let me double check but im 99% sure they are bolt on i got the complete kit. ill also get the pics to you hopefully tonight. do you have an email i could send them to?

Some LS1's came with the LS6 stock intake. You wouldn't happen to have that one would you?

PM sent

Quote:

---

Originally Posted by 98Z28CamaroJG

Some LS1's came with the LS6 stock intake. You wouldn't happen to have that one would you?

---

no sry this has the egr port, so its an ls1 one

Quote:

---

Originally Posted by 00camaro16

no sry this has the egr port, so its an ls1 one

---

i have one for a 98-00 ls6 intake that does have egr. slp released them like that also. get the part number or check the bottom. if the bottom is flat it's an ls6.

i hope i hope i hope!

LS1 intake manifold, with EGR (98-00 F-body) = 12561269 (formerly 12560688)
LS1 intake manifold, no EGR (from 97-00 Corvette) = 88894095 (formerly 12557846, 12556333)
LS6 intake manifold (01-02 F-body) = 88894339 (formerly 88890524, 88890523, 12561184)
LS6 intake manifold (from Corvette Z06) = ? (formerly 12573572)

Quote:

---

Originally Posted by 1fastcamarosss11

i have one for a 98-00 ls6 intake that does have egr. slp released them like that also. get the part number or check the bottom. if the bottom is flat it's an ls6.

---

thanks ill have my dad check tonight, but im 99% its and ls1.

chris

hey still waiting on pics, or the completness of that fuel rail

Quote:

---

Originally Posted by 99LS1

interested in headers ill get ahold of ya in a little bit

---

v6.
-99-02 v6 coated pacesetter headers brand new still in box, engine spun bearing before I could put them in. never used. $300.00 ($350.00 new)

just so you know.

Quote:

---

Originally Posted by 1fastcamarosss11

v6.
-99-02 v6 coated pacesetter headers brand new still in box, engine spun bearing before I could put them in. never used. $300.00 ($350.00 new)

just so you know.

---

yea i he texted me and after a little confusion we figured out that they wouldn't work for him lol. thanks tho

i would be interested in those o2's if you can tell me two things
will they work for the rear of my z28
and do they even work?

Quote:

---

Originally Posted by 98Z28CamaroJG

Some LS1's came with the LS6 stock intake. You wouldn't happen to have that one would you?

---

part number says its an ls1 intake

check your pm's man..ive never had this much stuff drug out trying to make a simple purchase

may snag those v6 wires from you....can i get a pic?

Quote:

---

Originally Posted by SteveCZ28

check your pm's man..ive never had this much stuff drug out trying to make a simple purchase

---

sry like i said i live across the state from my parents, where all the parts are located. so my dad has to take the pictures then e-mail them to me. Monday was my moms birthday so he was busy all day, then Tuesday was his birthday so i didn't want to bug him to do something for me. but now that I have explained what happened, check your pms for the paypal account e-mail. thanks

chris

Quote:

---

Originally Posted by Spikito

may snag those v6 wires from you....can i get a pic?

---

yea not a problem, whats an e-mail i could send them too?

payment sent for the rails...thanks

How much of a difference in performance in that that cam for a 98 and how is the wear on it? or if you could post a pic please

And forgot to add in there can i use stock valve springs and push rods with this cam

Quote:

---

Originally Posted by zeetwentyeight

And forgot to add in there can i use stock valve springs and push rods with this cam

---

camaro cam specs for 1998-----> 12557812 198/209 .500/.500 119.5
Corvette cam specs for 2004----> 12565308 204/218 .555/.551 117.5

yes you could use your stock valve springs and push rods. i am pretty sure most people suggest to replace your push rods any time you change your cam, but its not necessary.

Chris
[email protected]

Quote:

---

Originally Posted by zeetwentyeight

How much of a difference in performance in that that cam for a 98 and how is the wear on it? or if you could post a pic please

---

min wear, it was in the car for 30,xxx miles. and i will get a pic for you some time today. thanks.

chris

alright cool thanks guys

Quote:

---

Originally Posted by Ls_won

i would be interested in those o2's if you can tell me two things
will they work for the rear of my z28
and do they even work?

---

yes to both questions.

Quote:

---

Originally Posted by zeetwentyeight

alright cool thanks guys

---

pics sent

Quote:

---

Originally Posted by 00camaro16

yea not a problem, whats an e-mail i could send them too?

---

[email protected]

Quote:

---

Originally Posted by Spikito

[email protected]

---

pics sent

make me an offer on anything you wants guys.

how many miles on the MSD wires? also, how much shipped to 92835? pictures would be great as well. shoot me a PM for my email address.

Quote:

---

Originally Posted by benoh

how many miles on the MSD wires? also, how much shipped to 92835? pictures would be great as well. shoot me a PM for my email address.

---

email sent with pics and questions answered.

Hey I forgot to get back to you...ill take the wires

Quote:

---

Originally Posted by Spikito

Hey I forgot to get back to you...ill take the wires

---

actually when i went to go take pictures for you the first time, i found out i had two sets down stairs. so both people interested can get what they want.

chris

sweet first payer gets the better set? :)

Just Paypalled and emailed. Thanks again for the info and pictures.

2 10inch pioneer 500w subs (ts-w250r). $30.00 its still got them if yes send me a picture on my e mail [email protected]

Quote:

---

Originally Posted by Armani Camaro

2 10inch pioneer 500w subs (ts-w250r). $30.00 its still got them if yes send me a picture on my e mail [email protected]

---

email sent

check e mail last q and if yes tell me how much what about the shiping and how i pay you ?? :)

any word on when I should expect to see the MSD wires in the mail?

Quote:

---

Originally Posted by 00camaro16

email sent

---

check e mail last q and if yes tell me how much what about the shiping and how i pay you ??

Quote:

---

Originally Posted by benoh

any word on when I should expect to see the MSD wires in the mail?

---

yea sorry. the parts are at my parents house while im at college. my dad was away for business. i literally just called him, he is going to send them tomorrow.

chris

Quote:

---

Originally Posted by Armani Camaro

check e mail last q and if yes tell me how much what about the shiping and how i pay you ??

---

sent you an e-mail. i forgot to tell you about the payment though. my pay pal account is [email protected]. thanks

Quote:

---

Originally Posted by 00camaro16

sent you an e-mail. i forgot to tell you about the payment though. my pay pal account is [email protected]. thanks

---

ok thanks man

Quote:

---

Originally Posted by benoh

any word on when I should expect to see the MSD wires in the mail?

---

email sent with tracking number.

Quote:

---

Originally Posted by 00camaro16

sent you an e-mail. I forgot to tell you about the payment though. My pay pal account is [email protected]. Thanks

---

ok boss i send the money i send i 50 $ becouse paypal take some fees that way you not lossing anything let me know when you gonna send it :)

t.t.t, running into money problems, so bringing this back.

if the o2 are for a ls1 i will take them

Quote:

---

Originally Posted by cham626932

if the o2 are for a ls1 i will take them

---

yes they are, i will pm you too

is the tranny shift kit able to be put on my bird, its a 1999 v6? and same question with the o2 sensors. thanks, you dont have any trans am door panels do you?

Quote:

---

Originally Posted by izzhemp

is the tranny shift kit able to be put on my bird, its a 1999 v6? and same question with the o2 sensors. thanks, you dont have any trans am door panels do you?

---

yes the shift kit will work in all 4l60e transes, so it will work in your 96 v6. as for the o2 sensors i don't know, i will try to find out today for you.

Chris

headlight and taillight cover pictures please

Quote:

---

Originally Posted by 10spokess

headlight and taillight cover pictures please

---

pm sent

back again, can i see a picture of the 2000 v6 ecu?

for the people who asked for pictures, I'm gonna get them tomorrow for you all.

you should email me man lol

http://i573.photobucket.com/albums/s...s/100_4361.jpg
http://i573.photobucket.com/albums/s...s/100_4361.jpg
http://i573.photobucket.com/albums/s...s/100_4359.jpg
http://i573.photobucket.com/albums/s...s/100_4358.jpg

Sorry guys please remember, i go to school 3 and 1/2 hours away from the parts. i have to wait for my dad (who has been busy lately) to have a free minute to take the pictures and then e-mail them to me. thank you again. and i will e-mail you these right away.

pictures updated.

what's the lowest you would go for the v6 ecu shipped?

Quote:

---

Originally Posted by benoh

what's the lowest you would go for the v6 ecu shipped?

---

pm sent

Ill take that ls1 water pump off your hands if u still have it.

Quote:

---

Originally Posted by the_indian

Ill take that ls1 water pump off your hands if u still have it.

---

Yes i still have it, Paypal would be easiest for me. e-mail me at [email protected]. thanks.

whats the lowest you would do for the shift kit an o2 sensors shipped? and do the o2 sensors match up to the v6? or they only for the v8? thats my biggest concern, and could you send me some pics please thanks.

Pm sent

*intake and fuel rails sold*

*headlight and tail light covers pending*

*Camshaft and Valve spring sold*

*Water Pump Sold*

any word on if the ecu has been shipped? if not, when should I be expecting it?

Quote:

---

Originally Posted by benoh

any word on if the ecu has been shipped? if not, when should I be expecting it?

---

it was shipped, i e-mail you the tracking number.

did you email it? I'm still without a tracking number.

Quote:

---

Originally Posted by 00camaro16

it was shipped, i e-mail you the tracking number.

---

yup e-mailed it. ill looking for the message sent and send it again.

Chris

Quote:

---

Originally Posted by benoh

did you email it? I'm still without a tracking number.

---

tracking number says it was delivered today. will PM you and e-mail you with this and the tracking number so you can see for yourself.