Boyd Coddington Smoothie II's

So i just recently bought a trans am off this site which had these wheels already..The other day someone hit me and long story short there is minor body damage and one of the wheels has a deep scratch/scuff about 1/16 of an inch deep all the way around. the car still drove fine i drove it about a hundred mile before i had a chance to take it to the shop.. the other three wheels are in near perfect condition prolly 95%.. size is 17x10 all the way around with a 4in chrome lip.. the wheels look amazing on an fbody and are gunmetal grey with a chrome lip.. selling all four for around 600 plus shipping.. prefer local pick up in San Antonio because i dont have the wheels right here right now(on car in the shop) so i cant quote anyone shipping prices.. below is a pic on my car its the best i have since the car is in the shop..the other pic is the same wheel just polished.. car will be out on 5/5 and new wheels will prolly be here soon after..so soonest shipped could maybe be the 10th..selling so cheap cuz there is technically only three good wheels. the 4th will run but its to the users discretion?? a new one can be purchased but im just going to go with a new polished set from insurance..

jesus those are sexxy good luck bump for a good price

how bad is the rim do you have a pic? and do they have tires on them or just the rim?

i just put a set of nittos all the way around in which im going to pull off to put on the new wheels..i dont have a pic yet but will as soon as i get my car or if they let me take one at the shop.. best i can explain from about ten yards away you maybe maybe would be able to see the marks on the wheel..up close it looks pretty nasty but i just posted on here incase someone is lookin for a few or if someone knows how to get one cheap or anything?? illl get more pics asap.. im running 295's all the way around for a more bold stance in the front.. i like the look..

yeah if you can i would like to see some pics i just don't know how that gunmetal color would look on my car

is yours pewter?

yeah

mine is pewter..it looks good..it almost matches the car except a little more grey than the pewter..but it looks good..as far as i have researched they dont make the gunmetal color anymore..what you could do is buy one polished wheel that matches and get them powder coated pewter or something the replacement polished is 300 a wheel..let me get them off and make sure its not bent and ill keep in touch

yeah let me know because im here in fort worth i could just drive down or we could meet up somewhere in the middle. just let me know how that rim is as long as it doesn't leak and won't fall apart should be good to drive on for alittle while.

its def. not that bad. i could have left it on there but i got insurance to fix the car and there still checkin into how to replace the wheel..so ya..ill get you pix

sounds good

Where is the gouge? In the color or in the chrome?

in the chrome..kind of like curb rash..on the outside of the lip..1/2 way around

Easy fix. Someone could have a hell of a set of wheels for a darn good price here (Im guessing, I dont know how much those wheels run new).

p.m. sent

these are all pics of the messed up wheel.its like this 1/2 way around.. i got the word from insurance and the NEW price for the wheels is 800 picked up! or + shipping.. they are all in excellent condition and i look thoroughly at that one and its not bad at all you cant even notice it from a good ten feet away..just typical curb rash..the wheel will run or can be completely rebuilt for 400 from boyd.

Holy shit! $400 just to fix the one wheel. Id hate to see what those damn things cost new for 4 of them. They are trying to make a killing off that poor bastards death arent they?

That wheel can be fixed. It would be a process, but it could be fixed.

well wat they said is its two pieces and they pull it apart and then put the two good pieces back together or something?

oh and i went to billetwheel.com..then to the cast series..found the smoothie II.called the number and for a gunmetal grey billet style..(like the ones i have) they are 905 EACH..so this is a steal for 4 wheels..call it yourself..its nuts haha

http://www.rims-n-tires.com/rt_wheel...chool%20Finish
http://www.rims-n-tires.com/rt_wheel...S&carYear=2002

the smoothies are not 17x10 and gun metal grey..they apparently do not make the gunmetal grey anymore which is why from boyd it is 905 dollars..a 17x10 polished can probably be powder coated for a little less than 900 total

bump..new price $$$700..got to go..just order a new set!!!

will have them off polished and ready to ship by the end of next week!

Boyd rims are expensive, but their a really nice set of high quality rims. I got a set of boyds on my truck. They was expensive before he died... lol

yup..i got a really nice set too..whoever gets them will be satisfied..if i can ever get them SOLD...

new rims on..put the scratched one on the balancer and its not bent..ima take it to a shop this weekend and get them to grind down, buff, and polish the scuffs to clean them up!

alright suprisingly..I took it to my dads business and got on it with a grinder then sanding wheel then 3 hours of hand sanding then lighter and lighter hand sanding ending in 1000 grit then buffing and polishing..long story short you might not be able to pick this one wheel out of the set. i dont know how i got it so good but it looks awesome..pics will be up soon..i have a buyer for 700 here but i figured i would give you guys fair game at them..ill have the wheels on here for about one more week..

seriously this wheel looks 98 percent identical to the others it takes a good eye and knowledge of the damage to even know the damage even existed im at 700 firm for this set..i cant take pics real good but they should be clear enough..

great job on getting the wheel professionally fixed. i wish i had the money to take those wheels off your hands, but the lady would take me out back and "Ole Yeller" my ass if i bought them...they would look so bad-ass on my '95 TA...

may i suggest taking and posting pics of all (4) rims so potiental buyers and see the condition of the entire set...

bump for a great looking set of wheels at a very good price! :cheers:

i would but my attachments only let me hold like 5 pics how can i fix that?

sign up for free at: www.photobucket.com and download the pics there and then copy and paste the [img] tag bar (last box you can copy and select). very easy and straight forward. this is also how you post up BIG pics that you might have come across in other threads...

Here are the much wanted pics.. my zip is 78249 if yal wanted to check shipping..the boxes will be 24x24x11.. cuz thats what i got my new wheels shipped in i say they are about 40 lbs each for a rough estimation!

http://i393.photobucket.com/albums/p...8/SDC10749.jpg

http://i393.photobucket.com/albums/p...8/SDC10750.jpg

http://i393.photobucket.com/albums/p...8/SDC10752.jpg

http://i393.photobucket.com/albums/p...8/SDC10754.jpg

wheels are not clean by the way those are finger prints all over the polish..the first pic is the fixed wheel..im proud of myself cuz I never had any idea i could fix it so good!! haha:sillyme:

Damn it! I want those. No money, just shelled out 800 to fix my transmission. Noooooo! lol.

i just shelled out 700 for a clutch flywheel and slave...thats y i have to get rid of these so cheap!

bump

Bump for a good price. I wish I had something they would fit, Id buy them.

would luv then as well.. but i think shipping would be the killer :(

Do you still have these fs?

yup

These still for sale?

Sorry gone alooooong time ago..I recommend them tho they're bad ass!

They're my favorite rim. what size do we need?

I got an 02 trans am 17x10 all the way around nitto 285's in front 315's in back the setup is perfect! Car is lowered I jus had to roll my fenders..not sure about the offset but when u buy tyem tell them your model and they'll hook u up I went to ebay to get my new set..polished shipped to door 1300..can't beat that!