WCC Gets Pedderised - With some pics

Below is a post made by JusticePete. He gets to do all the cool stuff...


The phone rings in the office frequently. When the phone rings with a TV celebrity the call can lead to a ROAD Trip to West Coat Customs. Rory called asking if Pedders would be able to be of assistance with their latest project car which is a XXXXXXX XXXX XXX. We said we had a bit of experience with that chassis and would be willing to jump right in. How soon will the project start? We are already behind and need your support immediately. How soon is immediately? This week. Hmmm, let us check flights and schedules and we'll get back to you.

We are restricted on the pictures we can post and the information we can release. We can tell you that the project went well and the crew at West Coast is BETTER than you can see on TV. These guys are GOOD!

http://forums.peddersusa.com/imageho...4ed8165518.gif
http://forums.peddersusa.com/imageho...50d49aacde.gif
http://forums.peddersusa.com/imageho...4ed80e023f.gif
http://forums.peddersusa.com/imageho...4ed811d10f.gif
http://forums.peddersusa.com/imageho...4ed8124a1f.gif
http://forums.peddersusa.com/imageho...50f735169c.gif
http://forums.peddersusa.com/imageho...50f7357070.gif


The shop is a work of art in form and function. There is rolling art every where you look. There are murals on almost every wall. There is art in progress in upholstery, fabrication, paint, wiring and assembly. Every car is an original. While you could break it down as a custom body goes on each car so the function is the same, the steps required to execute a custom body are different vehicle to vehicle. Keeping a shop moving as a well oiled machine with this eXtreme level of customisation is a huge challenge. Ryan makes it look easy.

http://forums.peddersusa.com/imageho...50d49e718d.gif
http://forums.peddersusa.com/imageho...50d49dc1cc.gif
http://forums.peddersusa.com/imageho...50d49d0a3c.gif
http://forums.peddersusa.com/imageho...50d49c75d2.gif
http://forums.peddersusa.com/imageho...4ed816f151.gif
http://forums.peddersusa.com/imageho...51117a511b.gif

http://forums.peddersusa.com/imageho...5111785178.gif
http://forums.peddersusa.com/imageho...4ed812d2d3.gif
http://forums.peddersusa.com/imageho...4ed8138e4c.gif
http://forums.peddersusa.com/imageho...5111755fb0.gif
http://forums.peddersusa.com/imageho...511174a437.gif

We think our bits are works of art too. We hope the owner of the vehicle we worked on will be in 100% agreement when he takes delivery of his West Coast Customs rolling work of art. We really wish we could say more...

Working with Sean, Joe Rory and RYAN was a West Coast Customs Experience. Rory was AWESOME. If he did not handle himself so well on the phone Pedders would never have become involved with West Coast Customs.. Sean is a Master Craftsman. Joe has learned so much so fast at West Coast Customs is is amazing. The entire WCC Crew made us feel welcome and treated us like family. It felt like a Pedders shop in the USA or AU in that respect. We will post more pictures and information when the producers of the show allow us to do so. The show will air tonight or next week. We'll get back to you on the date as well. No WCC eXperience would be complete without a trip to Chronic Tacos. Rory said it would be good and it was.

http://forums.peddersusa.com/imageho...51666c1d2b.gif

Pedders USA, LLC would like to extend our thanks to Ryan, Rory, Sean and Joe for their hospitality while we were at West Coast Customs. BTW, the clothes fit the girls perfectly!!!

http://forums.peddersusa.com/imageho...4ed80efc35.gif


I'll keep you updated on when the show airs. Pedders is really excited that this was able to happen. Thanks for letting us share.

I think the best thing to happen to wcc is they dropped the pimp my ride crap...that was just giving them a bad name all together...but they have a new show on tlc i believe...cant think of the name right off hand, but they are making some insane stuff, they had a brand new dodge challenger roll thru, ended up getting a one off wide body kit and 26's...sounds dumbn, but if u saw it you would think it was gorgeous

that's rad!

Quote:

---

Originally Posted by SteveCZ28

I think the best thing to happen to wcc is they dropped the pimp my ride crap...that was just giving them a bad name all together...but they have a new show on tlc i believe...cant think of the name right off hand, but they are making some insane stuff, they had a brand new dodge challenger roll thru, ended up getting a one off wide body kit and 26's...sounds dumbn, but if u saw it you would think it was gorgeous

---

Wow! Wide body kit on a chally, that had to be wiiiiide. I'll look around for it. The show is "Street Customs" on TLC. Pete said there was a lot more cool stuff he saw, but won't talk about. He just said it was amazing.

Does every mexican who works there throw a "W" anytime their picture is taken?



:nana:

Pete kept talking about how hard these guys were working on the cars in there. Lot's of cool things happening in that shop. I just wish i could have gone. It would be cool to see the transformation in person.

yeah wcc, built the challenger, which is white, with huge 24's in front and 26's in back for Towbin Dodge...aka the Choppa....im on choppas site now looking up the challenger. trying to find it....it is ungodly sweet....id love to have it

Saw something on tv the other night on the show "street customs" they were building a 68 gto body and putting it opn a 06 gto frame....you werent involved with this project were you? because they did have pedder on site installing parts into the 06 gto frame...lemme know if this was the project you were talking bout 2 months ago hahaha

I see a camaro front end and some 18in GTO wheels in the background....HEHE. And also GTO door panals!


:thumbup:

ok im almost positive this is the car the O.P was talking about there...the delivery van thing (bread truck) was on this episode also being built for a casino...and i see gto door panels that ish was working on in the episode also....and the last pic of all the guys standing together is actually infront of the carcass of the 68 gto...and i see the gto united with the chassis in the background with the gto wheels on the front...and they were rolling it around on those shitty looking chrome wheels in one of the pedders pics also..so that had to be way awesome to be there for that build....hats off to you

Quote:

---

Originally Posted by SteveCZ28

Saw something on tv the other night on the show "street customs" they were building a 68 gto body and putting it opn a 06 gto frame....you werent involved with this project were you? because they did have pedder on site installing parts into the 06 gto frame...lemme know if this was the project you were talking bout 2 months ago hahaha

---

I saw that show before, but dont remember them doing the GTO. I did see a '68 Charger that they swapped on to the 2007 or 2008 Charger chassis/drivetrain and all that goodness. Are you mistaking it for that one? They built the car for Gary Dourdan, he plays Warrick Brown on CSI.

Yep, it was the 68 /06 GTO. Pete flew out there to do all of the work on the installation. When he got back he talked more about the quality of work these guys did on the car in the fab process than anything else. He spent 2 days there working on the car and getting the suspension set up. The car needed a lot of work. I'll get the post he sent over posted in the AM. He is very impressed by the crew at WCC.

more pics of that blue ws6 vert!!

This is an update from Pete Basica who did the installation @ WCC.



When I arrived at WCC the 69 GTO was about 30%% mated to the 06 GTO. The bracing filled the interior. What you don't see on the TV show is the work that really goes into a project like this. For every minute of air time, there are literally hours of work that are left on the cutting room floor. I could have spent a week just watching Sean and Joe work. They are masters of their craft.

http://forums.peddersusa.com/imageho...016c7488f7.gif
http://forums.peddersusa.com/imageho...016c753ca0.gif
http://forums.peddersusa.com/imageho...016c7632ae.gif
http://forums.peddersusa.com/imageho...016c797a63.gif
http://forums.peddersusa.com/imageho...016c7a1e6c.gif
http://forums.peddersusa.com/imageho...016c7ad5fd.gif

More updates from Pete


The interior was stacked on a rolling rack. It is a bit shocking to see just how many pieces are required to complete a GTO interior.

http://forums.peddersusa.com/imageho...016c78d65a.gif

They spend more air time on the conflict and personalities than they do on the craftsmanship. Reality TV requires this. If it was a show dedicated to the fine art of building custom cars it would not be the successful show it is today. You can believe much of what you see on the show. It is not scripted, but over the top behavior is encouraged by the editing process. If you do nothing unusual you won't get much air time. Take a normal disagreement up a couple of notches, break some glass, disagree with Ryan and you get air time. So while it is not scripted it is encouraged.

I would have liked them to discuss the challenges of mating a body on frame to a monocoque belly pan. I am still not sure what the technical term would be for a 2006 belly pan with sub-frames and a firewall -- how about a half-coque :angel2 Regardless of the name there are serious structural challenges. A monocoque is designed to be structurally stronger than the individual bits that comprise the unit. It is why I use the term monocoque as opposed to unibody. Early unibody vehicles were rattle traps. No one would ever confuse a Formula 1 race car with a unibody, but they are both monocoque structures. The challenge for Joe and Sean was to make certain that the custom GTO would be at least as strong if not stronger than either original vehicle.

While I was there I spoke at length with Sean about the strengths and weaknesses of the VZ series GTO. Unlike and F-body that required every conceivable brace, the GTO was reasonably robust. A GTO with a full cage tied to sub-frame connectors is a very solid platform well suited to racing. but heavy. Sean and Joe listened and increased some of the structure that was already planned to address structural strength. You can see in these pictures that the mating process is robust. What I would call the A Pillar where the does attach to the body structure is tank like. The mating at the base of the windshield to the fire wall it not only strong, it is a work of art. The rockers are like the old school convertibles. They become chassis rails with sheetmetal to cover the structural steel.

http://forums.peddersusa.com/imageho...016c76daa0.gif
http://forums.peddersusa.com/imageho...016c778a60.gif
http://forums.peddersusa.com/imageho...016c783638.gif
http://forums.peddersusa.com/imageho...01c5f13e65.gif
http://forums.peddersusa.com/imageho...01c5f1e26e.gif
http://forums.peddersusa.com/imageho...01c5f33c62.gif
http://forums.peddersusa.com/imageho...01c5f3ec8d.gif
http://forums.peddersusa.com/imageho...01c5f55b44.gif
http://forums.peddersusa.com/imageho...01f85ef2ca.gif
http://forums.peddersusa.com/imageho...01c5f60b04.gif
http://forums.peddersusa.com/imageho...01c5f6ca64.gif
http://forums.peddersusa.com/imageho...01c5f77641.gif
http://forums.peddersusa.com/imageho...01c5f28677.gif

Installing the suspension with Ryan, Sean and Joe was a lot of fun. I never worked on a GTO without a front section. That is why we thought we could take the sway bar out without loosening the sub-frame or anything else. I looked WIDE OPEN. The bar would not come out. It was so close to coming out we took turns because we all thought it would work. Appearances can be deceiving. The we all though cutting it would be fast and easy. We were all wrong again. Finally we got the sucker cut in half and it does come out really easy that way. Putting things back in are also interesting with so many people around. I'll go to my grave swearing I handed the sway bar to Ryan the right way, but it is his show so I am 100% certain I handed it to Ryan incorrectly. :p

More Updates from Pete...


Ryan was very interested in the suspension process. He is a master of the hot rod air bag style suspension. Changing out rubber OEM bushes for Pedders red urethane was a bit different for WCC. When we removed the rear sub-frame bushes in less than one minute per side Ryan was impressed. We agreed to exchange trade secrets on suspension when I return for another WCC build.

http://forums.peddersusa.com/imageho...01f86146b8.gif
http://forums.peddersusa.com/imageho...01f8609ec7.gif
http://forums.peddersusa.com/imageho...01f8620de8.gif
http://forums.peddersusa.com/imageho...01f8639478.gif
http://forums.peddersusa.com/imageho...01f862e0cf.gif
http://forums.peddersusa.com/imageho...01f85c4f1d.gif

Rory is the person at WCC that searched out Pedders as it became clear the build would need eXtreme suspension work. He is a lot like most of of us. Rory went to the Internet and forums to find the best solution for this high profile build. I would like to thank all of our customers for their support on the forums. I'll even thank those that are not our supporters, because good bad or indifferent Pedders is on the forums. It is easy to be on the forums when things are perfect. When we make a mistake or get involved with a difficult customer it is even more important we stay on the forums. We owe it to the clients and online communities. In the end, our participation in the online communities brought us to Rory and WCC. Thank you all.

Pedders did not pay for the exposure on WCC. We were asked to help them deliver a great car to Tanner. We were asked to help them resolve suspension issues the same way our customers ask us to assist them with suspension solutions. When you see Pedders in a magazine review you should know that Pedders does not pay for advertorial press. We do not advertise in magazines. The magazines see value in our suspension solution approach and write stories about the solution because it is a good story. This is a very awkward situation as the magazines need advertising to pay the bills. Pedders has taken the philosophical and business approach that in this stage of our business it is mission critical we EARN the press we receive based on the performance of our product. We will not buy advertising space, employ media consultants of press agents. Everything you read about Pedders in the press or see on TV is not influenced by a single dime of advertising.

I am a car guy. Because I am an owner I get to meet and interact with many people in the industry. I am no different than any of you. I was having an absolute blast hanging around the shop at WCC. It is no different when I go to the Milford Proving Grounds -- I am a kid in the candy store. In my office I have trade show badges on lanyards from every trade show I have attended. The one that is my favorite is my first Visitors Pass to GM and SPO. This episode of WCC is the first national TV exposure for Pedders USA. That is very cool. What I'll remember five years from now is not that it was Pedders first national TV exposure. I'll remember it was my first trip to a legendary place in the automotive world. I'll remember that it was my first trip to WCC. As my Aussie mates say -- Life is Good.

Rory -- When am I coming out for another taco?
Dave -- We have much work to do before the year is over.
Sean -- Dane was spot on. You are WCC.
Joe -- You are learning from the best. That means you should be better than the best before your career is over.
Ryan -- Thank you for your hospitality.

Show Segment on youtube

Thanks for reading this.
Dan

Sorry for my "country bumpkin" question...but what is the "W" sign these guys make in all the pictures mean?

Got me.

Quote:

---

Originally Posted by Sarge

Sorry for my "country bumpkin" question...but what is the "W" sign these guys make in all the pictures mean?

---

I think it's for "West Side" or their sign for West Coast Customs, but don't hold me on that, I'm quite the honky myself.

Quote:

---

Originally Posted by Sarge

Sorry for my "country bumpkin" question...but what is the "W" sign these guys make in all the pictures mean?

---

Started with gang bangers throwing signs

"W" means West Coast

I saw the show last night and they finished working on a 1955 truck for Sylvester Stallone. It was bad arse! I was bored of watching the Magic getting their butts handed to them by the Lakers.