You might have better luck than I did with my energy suspension trans mount. When I installed it, it created a vibration and I had to go back to a stock piece.
Printable View
You might have better luck than I did with my energy suspension trans mount. When I installed it, it created a vibration and I had to go back to a stock piece.
I'm expecting that. Probably gonna go poly motor mounts and rubber trans mount
tranny moves a lot when i'm around town, definitely needs a new one
If you can measure your driveline angle I would do so to make sure it isn't just the harder material causing a vibration. Don't have anything to back it up but you should get the same mounts to avoid excessive flex in one area.
i've always heard you want a little flex and poly motor mounts and a rubber trans mount was the way to go. I'll look into it a little more then
That has to be the best loaner car ever.
Yea I'm jealous too!
What I meant was if you get poly motor mounts get a poly trans mount, just don't mix match. Solid motor mounts with a rubber trans would cause the flex to be focused on the rubber since it is the weakest point.
I was too when he first got it, never expected to be using it.
Not sure what kind but i know it has exhaust, and the bose system kicks ass.
I hear ya. I'm probably going all poly then, i'll see when the time comes to do the motor mounts.
Little update as of an hour ago :hyper:
http://i871.photobucket.com/albums/a...1/DSC02609.jpg
yeah!
It came free with the software. Got it new off craigslist for 300 bucks
Also ordered an ls6 valley cover, and 2 new knock sensors.
Still gotta get the headers ordered, gonna hold off on lowering the car. There's a lot I need bbefore I throw the springs on there so I'm gonna be patient with that
Nice pick,one of my favorite cars in one of my favorite colors
Tater haven't talked to you later. any updates with the SS?
gmmg put on, mgw installed and new wheels in transit
Id have them on all corners, heard they're not the greatest to launch with but decent for every day driving. Just looked up the tracking and I should be getting them tomorrow.
As for the senekas I may end up keeping them, still deciding.
Trying to work out some living arrangements so the tires and headers may take a little longer than planned.