sub frame connector

ok so I can put my jack stands on the actual rear end and do them. Thanks.

If you can find a spot to put them, I just used ramps on the front and got two pieces of cross ties about 1ft long under the rear wheels. It got the car high enough off the ground to weld em on.

Quote:

---

Originally Posted by JayTA98

Thanks Beretta for the input. I'm doing the SFC and my bump stops. I need to do the ES ones since there is no stock one available. I'm also planning to do the non adjustable torque arm.

---

If you have "lowered" your vehicle, you want to go with a "adjustable" torque arm, so you can have the pinion angle set correctly.

SteveC :)

Quote:

---

Originally Posted by 35th-ANV-SS

Pretty sure UMI, BMR and Spohn all make torque arms that get the front mounting off the tailshaft of the transmission and mount it to a cross-member.

If you plan on lowering your car, get an adjustable torque arm.

---

Quote:

---

Originally Posted by SteveC

If you have "lowered" your vehicle, you want to go with a "adjustable" torque arm, so you can have the pinion angle set correctly.

SteveC :)

---

:yup: