Help Spend My Money

Didn't think about not being able to use the C5 kit with track wheels. Good catch, Scott. That is definitely a hindrance. Looks like R1 Concepts is going to be even more appealing to me now.

- - - Updated - - -

As far as decals go, I have some from a fellow member here that say "Camaro".

Quote:

---

Originally Posted by SMWS6TA

I've seen them Jeff. My only issue with a C5 or CTV conversion is getting wheels for the track.

I'd hate to have to spend $1500 on just 2 custom wheels in order to be able to run DR's. I also don't like that I have to grind off the OEM calibers to fit Pro Stars.

To me it weakens the caliber. Fine for track use only but my car is both strip/street. I've seen drag calibers but they are not rated for hwy use.

---

How is getting wheels the issue? There are plenty of 17 and 18" wheels you can use for the track. If you plan on running wheels smaller than that for the track then it would be an issue. But then I will be doing more auto x than drag, which is why I chose the cts-v set up.

I plan on running track dedicated wheels at some point in the future. Most likely that will mean a 15" wheel.

Quote:

---

Originally Posted by 98TransAmWs-6

How is getting wheels the issue? There are plenty of 17 and 18" wheels you can use for the track. If you plan on running wheels smaller than that for the track then it would be an issue. But then I will be doing more auto x than drag, which is why I chose the cts-v set up.

---

Only wheels I've found in those sizes have been custom made and have serious $$ to get them made.

Quote:

---

Originally Posted by 35th-ANV-SS

Didn't think about not being able to use the C5 kit with track wheels. Good catch, Scott. That is definitely a hindrance. Looks like R1 Concepts is going to be even more appealing to me now.

- - - Updated - - -

As far as decals go, I have some from a fellow member here that say "Camaro".

---

I'm not an expert builder but I've been reading a lot for future projects and this issue is one of em' that I keep looking for a solid solution.


R1 Concepts seems to be a good solution for me too.

I'll post pictures when I get them. Should be within a month.

Ordered the R1 Concept drilled and slotted premium rotors today along with the Hawk HPS pads. 20% off promo code. Out the door was $440 shipped. Not bad at all. Should be here within a week or so.

Good choice. Don't forget to post some pics of the install. Also, make sure to clean and lube your caliper pins while you have everything apart.

They came in today.

http://i416.photobucket.com/albums/p...-11-38_425.jpg

That works. You are going to like how your car stops once you get everything swapped over.

Nice!

I say the drag radials or the drag rims.

Did you get the premium ones for 400?

Sounds like a real decent price to me for all 4 rotors.

Got the front/rear premium drilled/slotted rotors and the Hawk HPS pads for $440 shipped.

Damn, not bad, plz update thread with your opinion on the money spent.