Post your Appearance mods here!

Okay, here goes, chrome Z06 Motorsports wheels 17X9.5 275-40-17 & 18X10.5 295-35-18 riding on GC Coilovers & Koni DA's 26" ride height front 26-3/8" rear, clear corners...

http://img.photobucket.com/albums/v4...6/P1010001.jpg

I like the stance:)

Pics of front end with recently installed RK Sports carbon fiber grill and SLP SS badge...

http://img.photobucket.com/albums/v4...6/P1010003.jpg

http://img.photobucket.com/albums/v4...6/P1010029.jpg

SLP dual-quad tips & rear valance...

http://img.photobucket.com/albums/v4...6/P1010015.jpg

http://img.photobucket.com/albums/v4...6/P1010021.jpg

http://img.photobucket.com/albums/v4...6/P1010014.jpg

Quote:

---

Originally Posted by Carlos01SS

Okay, here goes, chrome Z06 Motorsports wheels 17X9.5 275-40-17 & 18X10.5 295-35-18 riding on GC Coilovers & Koni DA's 26" ride height front 26-3/8" rear, clear corners...

http://img.photobucket.com/albums/v4...6/P1010001.jpg

I like the stance:)

Pics of front end with recently installed RK Sports carbon fiber grill and SLP SS badge...

http://img.photobucket.com/albums/v4...6/P1010003.jpg

http://img.photobucket.com/albums/v4...6/P1010029.jpg

SLP dual-quad tips & rear valance...

http://img.photobucket.com/albums/v4...6/P1010015.jpg

http://img.photobucket.com/albums/v4...6/P1010021.jpg

http://img.photobucket.com/albums/v4...6/P1010014.jpg

---

Very nice ride. I'm not too sure about the rear valance though, it looks like it flares out a bit too much. How are the Konis treating you? I'm lookin into getting some single adjustable myself.

Quote:

---

Originally Posted by Chevypowr

Very nice ride. I'm not too sure about the rear valance though, it looks like it flares out a bit too much. How are the Konis treating you? I'm lookin into getting some single adjustable myself.

---

Single adjustable Koni's are great, matter of fact they're better in the rears than the DA's, apparently the rear SA's are built a bit beefier than the rear DA's.

Looks like my rear DA's are blowing out :( they have issues like that.

I'm going to replace my rear DA's with the SA's thru Sam Strano. :)

Front DA's are hunky-dory, no issues there whatsoever.

Are Konis lifetime waranteed? What do you have the valving adjusted to? I also was considering bilsteins, I have a set of the HD struts on my VW. I've had them on the car for about 3years now with race springs, It handles like a go kart, but real real smooth when it comes to the neglected roads (which around me there are plenty). They still have the same ride as when they were brand new.

how about the adj. panhard bar, did that help out? My SS is dropped about 1.5in front and back with the eibachs and I know the rear axle has to out of center. There is so many chasis/suspension mods available for these cars I dont know where to start. Panhard bar, or subframe conectors are next. Or torque arm, to much to think about.

Quote:

---

Originally Posted by Chevypowr

Are Konis lifetime waranteed? What do you have the valving adjusted to? I also was considering bilsteins, I have a set of the HD struts on my VW. I've had them on the car for about 3years now with race springs, It handles like a go kart, but real real smooth when it comes to the neglected roads (which around me there are plenty). They still have the same ride as when they were brand new.

---

Koni's are lifetime warranted, I just don't want to have my car on blocks for a few weeks and then wait for Koni to fix them and send them back...Apparently Koni charges to rebuild, so lifetime warranty my ass.:toetap:

Anyway stories about the rear DA's blowing out is common, I'd rather just get the SA's for the rear and call it a day.

If your car is lowered, the Bilstein HD's are not ideal because they were designed for Camaro's with factory springs. You'd be better off calling Sam Strano, tell him what kind of springs you bought, he can get Bilsteins for you and revalve them to match your spring settings and THEN you'll be rockin:burnout:

Quote:

---

Originally Posted by Chevypowr

how about the adj. panhard bar, did that help out? My SS is dropped about 1.5in front and back with the eibachs and I know the rear axle has to out of center. There is so many chasis/suspension mods available for these cars I dont know where to start. Panhard bar, or subframe conectors are next. Or torque arm, to much to think about.

---

Adj. phb did the trick.:yup:

Get the phb first, then go for the shocks, and while you're at it, sounds like you want better traction since you brought up the torque arm...What about lower control brackets? Since your car is lowered your LCA'a are not at the right angle anymore, so LCA brackets will allow your LCA's to be put at the correct angle.

Quote:

---

Originally Posted by Carlos01SS

Koni's are lifetime warranted, I just don't want to have my car on blocks for a few weeks and then wait for Koni to fix them and send them back...Apparently Koni charges to rebuild, so lifetime warranty my ass.:toetap:

Anyway stories about the rear DA's blowing out is common, I'd rather just get the SA's for the rear and call it a day.

If your car is lowered, the Bilstein HD's are not ideal because they were designed for Camaro's with factory springs. You'd be better off calling Sam Strano, tell him what kind of springs you bought, he can get Bilsteins for you and revalve them to match your spring settings and THEN you'll be rockin:burnout:

---

Right on dude, thanks alot. yeah i guess thats what the sports are for, the shortened shock body. I guess LGmotorsports can also get custom valving done also.

yes, I have the lca relocation brackets at home I need to throw them in, I was going to get all the rear traction sh*t then install them all at one time while its ripped apart. I also have 3.73 I need to have installed - I'm not going to do that, I wouldn't want to mess the shimming and all that up.

My car isnt really a show car, but i try to keep her as clean as possible. here are a few mods i've done to stella. i loved everything about the 4th gen WS6s except for the look of the rear end, i took car of that:)

just go here, my pics are too large to upload to ls1.com
cardomain.com/ride/535621

Anybody like flames??

NotSoStock99TA

What kind of wheels are they? Are they 17"?
Thanks!

17x9" American Racing 'Rebels'...For Sale btw

You've got a pm

^
|
Want some 18's? ;)

Are your 18" wheels & tires for sale? If so, send me the specifics on them.
Thanks.

not so stock where did you get that t/a... it looks exactly like one that was for sale in my town like a month ago... btw my town is Littlerock...... i wne tto look at it and it was sold...

although i thought its had fiske (sp) on it

here my baby
pictures were taken with a camera phone and it was about 10degrees outside as well...its only a v6 but i loved the bird so much that i had to have something considering no ws6's are sold in my area
http://i3.photobucket.com/albums/y96...ictures-10.jpg
http://i3.photobucket.com/albums/y96...ictures-06.jpg
http://i3.photobucket.com/albums/y96...ictures-05.jpg
http://i3.photobucket.com/albums/y96...ictures-04.jpg
http://i3.photobucket.com/albums/y96...ictures-03.jpg
http://i3.photobucket.com/albums/y96...ictures-02.jpg
http://i3.photobucket.com/albums/y96...ictures-01.jpg

FloridaZ I love the ground effects on your camaro. know where I could get a set?

heres my 2000 WS6 with 34,xxx miles, mods are in the eibach sportlines,more in sig http://i46.photobucket.com/albums/f1...Picture057.jpg