Thanks man
Printable View
Thanks man
Quote:
Originally Posted by Edward-T
Stock 10 bolt? If so, a weeping pinion seal is a factory installed option. A few guys have replaced the seal only to have them start weeping again within a short period of time. If it's not dripping on the floor, you may just want to run it.
Quote:
Originally Posted by cpop98ws6
Very cool! :thumbup:
took mine back to SLP and took some pics. Religious experience for the car i'm sure lol.
lets see um
Your going the wrong way :lol: just messing with you. I had to say it though.Quote:
Originally Posted by LSCyaL8R
bad ass
started on my FRC's. got em' notched out and fitted. Priming now.
did 2 medium coats of adhesive, then Primer 1st coat light, 2 med. now I've wet sanded (600 grit). I still see some pin holes so I'm shooting another med coat of primer to see if the fill in. The I'll do another wet sand.
If this turns out well I may have to redo my intake again. (I didn't wet sand it)
washed car
vacuumed car
wiped entire interior down with meguires detail wipes
touched up a few scratches with scratch repair
polished car and rims
waxed entire car
all of this was done at a friends garage while it was sunny and hot then it poured rain. But him being a good friend he let my TA stay in the garage while his olds 442 sit in the rain. We are both in the car show tomorrow. with me luck!
ran it on some portable dyno today at the car show. 301hp 426tq. Not sure whats going on there? Average was 246hp 365tq. With an auto with 3200 stall and 2.73 gears. Never been on a dyno but was expecting a bit more. At least 320 or 330 hp. Oh well. Time for the turbo to get underway lol
Yea its a factory 10 bolt with an Eaton posi and 410 gears, just weeping a little, thats the 3rd rear end to be in the car-according to the previose owner, appears to be an earlier model judging from the e-brake brackets, i could be wrong tho! i love the blue car pics above and the red one is sweet too.
Drove to a few local 4th parades today, and ordered my first mods from Speed Inc...an SLP airbox with their high flow filter.
Yesterday met up with a friend of a friend who has a 2000 WS6, took the following photos...
http://img.photobucket.com/albums/v2...9707435C17.jpg
http://img.photobucket.com/albums/v2...D533C66CEC.jpg
Spent the whole weekend in Pigeon Forge, TN cruisin around t-topless :D
:lol: when I first read that I thought you said topless and I was like what?!?!? But then I reread that and realized you said t-topless.Quote:
Originally Posted by dragonchick
Quote:
Originally Posted by Furious1Drove to a few local 4th parades today, and ordered my first mods from Speed Inc...an SLP airbox with their high flow filter.
Yesterday met up with a friend of a friend who has a 2000 WS6, took the following photos...
Just need a blue one and you would have had it nailed for the 4th. Nice looking cars.
That is exactly what we thought...where is a NMB when you need one?Quote:
Originally Posted by pajeff02
Sorry I was in Long Island blowing shit up
As long as it wasn't anything on the car, you're good.Quote:
Originally Posted by LSCyaL8R
Yeah, no body had any beads, lol ;p
Yeah, no one had any beads, lol :pQuote:
Originally Posted by 98TransAmWs-6
