What did you do with your Trans Am today?

Printable View

06-14-2019, 02:28 PM
Naaman

Quote:

Originally Posted by Brian Lundell

The Trans Am sat for about 16 months in storage. It is a leak that is hitting the engine making some smoke. The leak is steering fluid, so I will have to check out the rings this weekend. I will change out the hoses while I'm at it. Everything is original on my car as I bought it new in 2002. It has 157K miles on it, so things are popping up here and there now.

I was unable to acquire one of the hoses (I think the return hose) as it is no longer produced by GM, and there is no after market solution. I took my car to the hot rod shop, to have it fixed after I replaced the pump myself (reusing the hose) because the leak was still there. The hot rod shop (which specializes in F-Bodies and GMs in general. In fact, the owner daily drives a B4C and races a Trans-Am) was unable to get a replacement part, so they had to have Hose Power fab up a custom solution.

If you're able to get both lines, let us know!
06-15-2019, 06:45 AM
Naaman

I replaced SOME of my pulleys but ran into a snag....

Quote:

Originally Posted by Naaman

So, I replaced both tensioner pulleys, and the main accessory drive idler pulley.

The A/C idler pulley uses a torx head bolt rather than a standard bolt and the one on my car is stripped out.... (Of course the experience wouldn't be complete without a trip to the hardware store to buy more tools.... ) :brick:

Anyway, I have a torx size 40, which seems to grip inside the new bolt, but it doesn't grip the old bolt (it looks a bit too small). Does anyone know if this is the right size?

Any tips on getting the stripped one out of there? The space it tight, as you all know, being between the radiator and the engine... my bit driver doesn't fit. I tried using a ratchet, but since it's stripped, I can't get it to turn.

Any tips before I break down and take it to the shop?
06-22-2019, 01:21 PM
Naaman

Well, the bolt extractors didn't work (21mm seems to not want to fit around the bolt head, and 22mm is just too big).
06-24-2019, 06:35 AM
Y2KArcticSS

New rack and pinion installed. It was as terrible as I thought it would be, but it's done. MUCH better steering response and no more slack, the old one was in pretty bad shape. Koni shocks and Strano springs are next.
06-25-2019, 10:37 AM
hardtrailz

Noticed what sounds like some pulley noise. Hoping i can diagnose and fix this weekend.
06-25-2019, 06:50 PM
Naaman

Quote:

Originally Posted by hardtrailz

Noticed what sounds like some pulley noise. Hoping i can diagnose and fix this weekend.

I've been at this very thing for a few weeks now. If you don't have a set of torx-extractors, definitely consider getting some for the A/C idler pulley. Mine was stripped and it's been several weeks tracking down a means to get the bolt out. Also, be sure that your main drive belt idler pulley is the right one for your year. I think it was in 00 when they switched pulleys. Maybe just drive to the auto parts store, pull that pulley and compare to what they have.
06-28-2019, 03:48 PM
Whamhammer

Quote:

Originally Posted by Naaman

I was unable to acquire one of the hoses (I think the return hose) as it is no longer produced by GM, and there is no after market solution. I took my car to the hot rod shop, to have it fixed after I replaced the pump myself (reusing the hose) because the leak was still there. The hot rod shop (which specializes in F-Bodies and GMs in general. In fact, the owner daily drives a B4C and races a Trans-Am) was unable to get a replacement part, so they had to have Hose Power fab up a custom solution.

If you're able to get both lines, let us know!

I know I am late to the show on this but the Power Steering return hose is just bulk hose.

I just replaces all of my power steering system in January, and had no issue sourcing a power steering pressure hose, granted that it was aftermarket but it is proper for the car.
06-28-2019, 03:59 PM
Kolonite

IIIIII ordered new wheels for mine, not today but last night. The Thunder Chicken will have new shoes by next wednesday.
06-28-2019, 06:52 PM
SMWS6TA

What did you do with your Trans Am today?

Been a busy day. 2 oil changes on both birds, replaced belt, opsu, and install the rest of the interior back on the vert.

Also adjusted my pinon angle on the Trans Am. Had to after I replaced the bracket broke on last track day in Feb.

Also got something back today, but that's for later.
06-28-2019, 08:38 PM
SMWS6TA

Ok it's later, needed the pics to upload...

The donor dash is back and done. Just need to make time to tear mine out and make the swap.

https://live.staticflickr.com/65535/...e7a3264f_k.jpg

https://live.staticflickr.com/65535/...d3760470_k.jpg
06-29-2019, 01:56 AM
pajeff02

The Trans Am finally got a new set of shoes. Absolutely screaming deal on a set of Eagle F1's through Tire Rack. Very pleased with both the tires and how easy the swap went.

Now I have to contend with a front end noise. Definitely have a low speed squeak emanating from one or more of the poly suspension bushings. Mine all have zerks but I know that it will not be that simple.
06-29-2019, 08:05 PM
SMWS6TA

What did you do with your Trans Am today?

Got some more stuff on the vert today. Picked up a carpet dash pad from Lethal Interiors. So the broken into a thousand pieces of a dash pad is gone and not an eye sore. Biggest accomplishment was figuring out the correct way to mount the seal tracks for the gaskets for the top. Also installed new seals from Hawks3rdgen. They seem to be the only place for vert parts btw.
06-30-2019, 06:42 PM
SMWS6TA

And today was the last day of vacation so I finished installing my sub and amp that's been sitting in my garage for months now. Sounds great.
07-01-2019, 07:41 AM
Y2KArcticSS

Koni STR.T shocks and Strano springs arrive today, along with a host of LED lights to replace on the tail end (and some replacements for the SS as well). Rear axle for the passenger side arrives tomorrow (turns out there was more than a bearing/seal issue on that side). Hopefully I'll have some time between BANG ooo ahhh's this weekend to tinker with cars.
07-03-2019, 11:23 AM
SMWS6TA

Trying to decide if I want to open a can of worms by starting on swapping out the dash. I know this is going to take a few hours. When I got the donor dash I was just ripping it out as fast as I could without damaging the dash.

This time I plan on taking more time since it's an install.
07-04-2019, 02:18 AM
pajeff02

I swapped a dash in an Olds Alero long ago. It was a wreck and rebuild that we purchased. Not terrible, but definitely did take some time to complete.
07-04-2019, 04:19 AM
SMWS6TA

Yup I'm a Sadist, gluten for punishment......I'm further along then this pic. Some lessons learn while putting it back in, drop and remove the steering wheel and a gauge pod and the wire harness will be a PITA to work around if you have no quick disconnects, a 2nd person is very much needed for smoother process.
https://live.staticflickr.com/65535/...6f2536c3_k.jpg

Why, why does our car's require a blood sacrifice to work on? This damn thing is sharper then it appears, required a visit last night to the er for some glue to stop the bleeding above my left eye.
https://live.staticflickr.com/65535/...5ddbaaee_k.jpg

I wonder if I can plastic weld it???
https://live.staticflickr.com/65535/...2c9a02f7_k.jpg
07-04-2019, 12:34 PM
024mula

Quote:

Originally Posted by SMWS6TA

I wonder if I can plastic weld it???

I hear good things about J-B Weld. :lol:
07-05-2019, 02:24 AM
pajeff02

That is beyond destroyed. :(
07-05-2019, 04:01 AM
Naaman

Trying to hunt down a God-awful squeak in the rear passenger side area. From the driver seat, it sounds like it's coming from inside the fender...

Got under the car and greased up all the rear suspension parts, but still the squeak remains... grumble, grumble...

Has anyone else had such a squeak and/or have any other clues?