What did you do with your Trans Am today?

Quote:

---

Originally Posted by T/A98

Jeff I like the Bogarts. Theyre the same ones we used to have on our lightning.

Anyway, I went to do plugs. Had all 8 out in 15 minutes from the top, not to bad if I say so myself. hah. But then I found out I dont own a plug gapper. After looking at the old plugs it looks like they were never gapped either. Im guessing having them opened a little more to spec will help a little bit. They did have some oil on them, im guessing valve seals, it never smokes and all cylinders were between 117-125 psi compression.

---

Thanks!

That could be some kind of record.

I set a record once while changing plugs.....the amount of cuss words one can utter.....

Quote:

---

Originally Posted by Knight

I set a record once while changing plugs.....the amount of cuss words one can utter.....

---

I usually go for the most scratches on the back of my hands...

Quote:

---

Originally Posted by ls1camino

I usually go for the most scratches on the back of my hands...

---

^^ This.

new (to me) wheels this weekend:

chrome c4 ZR1s w/ WS.6 center caps!

http://ls1.com/forums/picture.php?al...pictureid=2947

Quote:

---

Originally Posted by ls1camino

I usually go for the most scratches on the back of my hands...

God damn slow internet making me double post...delete please.

---

At least your not trying to change plugs on a third gen' v-8. I had to be a contortionist on my old '89!!!

Kerse, those look nice also you don't see to many hardtops anymore.

EEK! started sanding and fiberglass repairing my WS6 style hood (aftermarket) so i can get it ready for paint.

this was in the mailbox today ::shitstorm: it is to replace the FUGLY blue and yellow plates that NY has moved to. i was able to get a custom yankee plate and it was worth it.

http://i659.photobucket.com/albums/u...cak/lswut1.jpg

Walked into the Garage, installed my new decals, shampoo'd the carpet, realized i was out of gas, so i took a cruise down the valley to fill it up, and as it cost ~80 bucks, i will let it sit in my garage just a little bit more haha
good thing my DD is a firebird!

wife just called me to tell me my shifter is here.

screwed with my exhaust, some welds broke and my driver side tip wont stay in the hanger....

Got the PRO 5.0 installed. Only thing I forgot was to re-install the rubber boot screws. Oh-well next time.

What a difference. It's going to take a few trips to get use to it.

http://i584.photobucket.com/albums/s...0/100_6127.jpg
side by side comparison
http://i584.photobucket.com/albums/s...0/100_6136.jpg

Finished
http://i584.photobucket.com/albums/s...0/100_6141.jpg


I've got enough pics to do a how to thread if anybody is interested.

Catch can was delivered. Looking forward to installing this when I get back from the show this weekend.

Quote:

---

Originally Posted by SMWS6TA

Got the PRO 5.0 installed.

I've got enough pics to do a how to thread if anybody is interested.

---

Go for it!! I've been looking for a shifter install write-up to sticky in the manual trans section.

Quote:

---

Originally Posted by pajeff02

Catch can was delivered. Looking forward to installing this when I get back from the show this weekend.

---

Put your car in the tent, and you can do a live demonstration during the show. :D

Quote:

---

Originally Posted by Knight

Put your car in the tent, and you can do a live demonstration during the show. :D

---

Smokey burnouts at the top and bottom of the hour?

Quote:

---

Originally Posted by pajeff02

Smokey burnouts at the top and bottom of the hour?

---

Not bad.....and if Spaz is there - how to replace your rear diff!

Quote:

---

Originally Posted by Knight

Not bad.....and if Spaz is there - how to replace your rear diff! again

---

Fixed :lmao: :wall:

:haha: