Train for the Weekend

Printable View

03-10-2006, 07:18 AM
Zboner

Quote:

Originally Posted by MadSeason

Dude megatron was optimus prime's enemy, leader of the decepticons.. The big Gun? Ring a bell?

:yup: :lol:
03-10-2006, 07:19 AM
MadSeason

Quote:

Originally Posted by HASTINGSRJ

Keep your stock rockers....they are bomb....1.7 LS1 rockers are good, no need to swap them.....

I'd keep the stock size, but I've seen some good improvements in other peoples applications when going to lighter rollers, we'll see where my budget is at
03-10-2006, 07:19 AM
XtremGTO

I'm getting a new cam soon
228/228 588/588 114 lsa
I just have to save up for the tune :)
03-10-2006, 07:19 AM
BIG D's SS

Quote:

Originally Posted by MadSeason

Yea basically the only thing I need is the cam transplanted, check out my website for a mod list, just click my name on here, the link should work... Also lookin at rocker arms though, keep it stock size, the cam I ordered takes into account what the Springs I have in there can be pushed to

Just think all this will cost you is a some alchyhol if we do it down here. And what an experience you will have. IF we are going to do it I need to know to make plans to have as much of the special tools I can get. I will have to borrow a harmonic balancer puller and some tq wrenches. I just need to know to make plans.
03-10-2006, 07:20 AM
Zboner

Cassy dont invite Dave to play paintball with your son, i found this picture of him the last time he played

http://www.adventureclub.info/albums...illerBunny.jpg
03-10-2006, 07:22 AM
BIG D's SS

Quote:

Originally Posted by Zboner

Cassy dont invite Dave to play paintball with your son, i found this picture of him the last time he played

http://www.adventureclub.info/albums...illerBunny.jpg

Hey Boner :hifinger:
03-10-2006, 07:23 AM
HASTINGSRJ

Quote:

Originally Posted by XtremGTO

I'm getting a new cam soon
228/228 588/588 114 lsa
I just have to save up for the tune :)

:woot:
03-10-2006, 07:23 AM
Zboner

hahahahahahaha
03-10-2006, 07:24 AM
MadSeason

Quote:

Originally Posted by BIG D's SS

Just think all this will cost you is a some alchyhol if we do it down here. And what an experience you will have. IF we are going to do it I need to know to make plans to have as much of the special tools I can get. I will have to borrow a harmonic balancer puller and some tq wrenches. I just need to know to make plans.

I'm pretty sure I don't want to spend the 350 for the shops install and 450 for their tune when I can enjoy the experience with you guys and drive back to the place that originally tuned it in Chicago and hope I get a discount, Thats roller rocker money right there
03-10-2006, 07:24 AM
MadSeason

but yea, I'll make sure to let you know in Advance so we have all the gaskets, tools, ect..
03-10-2006, 07:24 AM
XtremGTO

I got new rotors for Valentine's Day :D
03-10-2006, 07:25 AM
MadSeason

Quote:

Originally Posted by Zboner

Cassy dont invite Dave to play paintball with your son, i found this picture of him the last time he played

http://www.adventureclub.info/albums...illerBunny.jpg

That's probaby not a bad Idea, paint balls hurt if your not wearing enough padding
03-10-2006, 07:26 AM
BIG D's SS

Quote:

Originally Posted by MadSeason

I'm pretty sure I don't want to spend the 350 for the shops install and 450 for their tune when I can enjoy the experience with you guys and drive back to the place that originally tuned it in Chicago and hope I get a discount, Thats roller rocker money right there

I have changed one cam and Rob has done quit a few. We just need to get the tq specs and make sure you have all theparts. The main thing is the cam and crank seal. Man that will be a blast. Just keepus in the loop so we can make plans. We could start Friday night and that way it would give us more time if needed.
03-10-2006, 07:26 AM
MadSeason

Quote:

Originally Posted by XtremGTO

I got new rotors for Valentine's Day :D

I got a homemade card with grover on it, i wish i got rotors and pads instead
03-10-2006, 07:27 AM
MadSeason

Quote:

Originally Posted by BIG D's SS

I have changed one cam and Rob has done quit a few. We just need to get the tq specs and make sure you have all theparts. The main thing is the cam and crank seal. Man that will be a blast. Just keepus in the loop so we can make plans. We could start Friday night and that way it would give us more time if needed.

I'm Stoked
03-10-2006, 07:27 AM
BIG D's SS

Quote:

Originally Posted by MadSeason

I got a homemade card with grover on it, i wish i got rotors and pads instead

I got a jack and jack stands for Valentines Day.
03-10-2006, 07:28 AM
BIG D's SS

Quote:

Originally Posted by MadSeason

I'm Stoked

Hell I'm ready. Where did Rob go?:dunno:
03-10-2006, 07:28 AM
HASTINGSRJ

Quote:

Originally Posted by XtremGTO

I got new rotors for Valentine's Day :D

Awww, Steve is so nice:D
03-10-2006, 07:29 AM
XtremGTO

Quote:

Originally Posted by MadSeason

I got a homemade card with grover on it, i wish i got rotors and pads instead

:( I got some Baer Decela rotors. They kick ass! I can not believe the diffrence.

One day I might actually get to do something to my car to make it faster :rotfl:
03-10-2006, 07:29 AM
BIG D's SS

Hey there Rob is. He is getting like Ed when you mention his name he appears.

***Train for the Weekend***

Train for the Weekend