Exhaust Tips

Printable View

Show 100 post(s) from this thread on one page

03-24-2010, 07:14 AM
Alex18

Yeah it's not bad, just thought you should check it out.
03-24-2010, 03:35 PM
damianj03

is there any dual/dual exhaust tips that turn upward?
03-24-2010, 04:57 PM
cammed goat

Quote:

Originally Posted by damianj03

is there any dual/dual exhaust tips that turn upward?

I sure hope you don't mean the DTM tips that are used on VWs.:no:
03-24-2010, 05:10 PM
damianj03

na some square shaped ones dual dual like this but without the burn tips and the muffler

http://cgi.ebay.com/ebaymotors/UNIVE...item1e5b121a67
03-24-2010, 09:57 PM
RyanJM

I got some Corsa Clones fron afterthoughts auto for $55 and had them welded on. Look as good as my friends magnaflow for less money.
03-25-2010, 12:16 AM
SactownHuskers

Quote:

Originally Posted by Alex18

I'm going to look into those Magnaflow tips, I like the way they look. Thanks for posting that pic!

+1.. cheapest I found them on Ebay was for 705.00 for the whole set up. But that is a buy it now price. Gonna try to get it a bit cheaper
03-25-2010, 02:11 AM
Too Fast

Since my car is driven about 10k/year, the stock tips would sometimes scrape on the bottom over big dips or steep driveways. I was going to get some bigger, 3.5" single rolled tip slash cut, then decided against it since they would scrape more often and possible get all f'd up. So, I bought some stainless 1970 GTO 2.5" dual slant cut rolled tip, they look nice and fill the panel a lot better than the OE stuff. In hindsight, I think if these were the same except 3", it would have been perfect. They are long enough that you have to get down and look to see where they split.
03-25-2010, 03:30 AM
kempfer99ta

Quote:

Originally Posted by Too Fast

Since my car is driven about 10k/year, the stock tips would sometimes scrape on the bottom over big dips or steep driveways. I was going to get some bigger, 3.5" single rolled tip slash cut, then decided against it since they would scrape more often and possible get all f'd up. So, I bought some stainless 1970 GTO 2.5" dual slant cut rolled tip, they look nice and fill the panel a lot better than the OE stuff. In hindsight, I think if these were the same except 3", it would have been perfect. They are long enough that you have to get down and look to see where they split.

Are the GTO tips the ones that you can get from PYPES?
03-25-2010, 04:58 AM
pajeff02

Quote:

Originally Posted by Too Fast

Since my car is driven about 10k/year, the stock tips would sometimes scrape on the bottom over big dips or steep driveways. I was going to get some bigger, 3.5" single rolled tip slash cut, then decided against it since they would scrape more often and possible get all f'd up. So, I bought some stainless 1970 GTO 2.5" dual slant cut rolled tip, they look nice and fill the panel a lot better than the OE stuff. In hindsight, I think if these were the same except 3", it would have been perfect. They are long enough that you have to get down and look to see where they split.

How much are you lowered? At stock height, there is no way our tips will contact the road surface, even on steep inclines or in road dips. If they do, that means I have bigger things to worry about than the tips!
03-25-2010, 03:50 PM
Too Fast

Quote:

Originally Posted by kempfer99ta

Are the GTO tips the ones that you can get from PYPES?

Yes, them's the ones. I like 'em because they are stainless, and I bought them from Jeg's for around $75.

Quote:

Originally Posted by pajeff02

How much are you lowered? At stock height, there is no way our tips will contact the road surface, even on steep inclines or in road dips. If they do, that means I have bigger things to worry about than the tips!

I'm not lowered. Somtimes I think the car is higher than others LOL.

I've backed into things before, like rocks or high curbs, that's usually how it happens. Or backed up, and a rear tire went into an unseen hole.
03-26-2010, 04:23 AM
kempfer99ta

Quote:

Originally Posted by Too Fast

Yes, them's the ones. I like 'em because they are stainless, and I bought them from Jeg's for around $75.

I'm not lowered. Somtimes I think the car is higher than others LOL.

I've backed into things before, like rocks or high curbs, that's usually how it happens. Or backed up, and a rear tire went into an unseen hole.

Do you have a pic of the tips on the car. I have been thinking about getting a pair of those myself.
03-26-2010, 12:42 PM
RyanJM

I have BMR lowering springs and have never scraped my tips. Now my ypipe hits speed bumps and steep driveways.are another story
03-26-2010, 02:22 PM
Too Fast

Quote:

Originally Posted by kempfer99ta

Do you have a pic of the tips on the car. I have been thinking about getting a pair of those myself.

I will upload that in a few days.....
03-28-2010, 03:46 AM
kempfer99ta

Quote:

Originally Posted by Too Fast

I will upload that in a few days.....

Cool thanks
03-28-2010, 07:07 PM
smkn gts

http://i874.photobucket.com/albums/a...a/IMG_1132.jpg
03-29-2010, 09:46 AM
Too Fast

So here are the Pypes 1970-71 GTO 2.5" slant, rolled tip stainless steel tips on Too Fast:
http://i233.photobucket.com/albums/e...t/IMG_3431.jpg
http://i233.photobucket.com/albums/e...t/IMG_3430.jpg
http://i233.photobucket.com/albums/e...t/IMG_3429.jpg

I took these pictures today, about 1:00. The sun was directly overhead, so it was hard
to get a good picture. They don't stick out far, but in these photos it might look that
way. Stainless won't quite shine like a chrome tip does, but it won't rust.
03-29-2010, 11:35 AM
kempfer99ta

Thanks for the pics. They do look good
03-29-2010, 02:42 PM
bobodog

its hard to see but heres my single tips with my "overplayed" TT's. i'd like to get dual tips one day but for now, these will do.
http://i218.photobucket.com/albums/c...an/Cars026.jpg
03-30-2010, 02:21 AM
Too Fast

Quote:

Originally Posted by bobodog

its hard to see but heres my single tips with my "overplayed" TT's. i'd like to get dual tips one day but for now, these will do.

Yeah I waffled quite a bit about single large chrome tips or the dual style. What made my mind up was remembering a few times that I already had scraped the OE tips, so I didn't want anything really big. Your tips look good.
03-30-2010, 06:11 AM
Baluchitherium

Too Fast and bobodog-

Great looking pics guys,thanks!

Show 100 post(s) from this thread on one page