http://i1301.photobucket.com/albums/...psfbebbffd.jpg put on an emblem I had made to match the paint.
Printable View
http://i1301.photobucket.com/albums/...psfbebbffd.jpg put on an emblem I had made to match the paint.
Lol. I went with a mid cam since I have never had a cammed car before. I may go bigger if I after a while I want more.Quote:
Originally Posted by ls1camino
D'awww...look at the cute wittle bwaby cam :lmao:Quote:
Originally Posted by 98TransAmWs-6My cam and .660 BTR dual valve springs with titanium retainers cam in today.
I'm just messing with you man..those lift and duration numbers should give you some nice power (and sound).
Pretty damn near close to mine, look forward to comparing numbersQuote:
Originally Posted by 98TransAmWs-6
http://i871.photobucket.com/albums/a...ps7b861e4e.jpg
Installed a carbon fiber hood. They only sent me three screws to put in the tunnel grilles, so that will have to wait for the weekend. The fitment is amazing. a little off on driver's side, but I'm going to see if a little warmth and sunlight takes care of it. If not, I'll just lower the hinge bracket on the driver's side.
sat in the drivers seat, making plans to take over the world...........
Looked at it, decided the pollen had laid a nice layer on it, whipped it down, drove it around the block and put it away. Damn pollen it taken over the world up here!
I got my painted LS6 intake installed. Trying to decide what I want to paint next. I'm thinking of doing the valve covers the same blue and the coil packs gloss black
http://i91.photobucket.com/albums/k2...ps25c43d2a.jpg
Yeah let me know what you put down. My numbers are going to be delayed since I am doing a rebuild as well.Quote:
Originally Posted by tatertot91Pretty damn near close to mine, look forward to comparing numbersQuote:
Originally Posted by 98TransAmWs-6
http://i871.photobucket.com/albums/a...ps7b861e4e.jpg
Will do, i'm ordering parts little by little here and there.Quote:
Originally Posted by 98TransAmWs-6
My wallet doesn't fill itself up fast enough
cleaned up the under carriage a bit and put the drag wheels on.
http://i1142.photobucket.com/albums/...ps0815a1ed.jpg
http://i1142.photobucket.com/albums/...psd994dd08.jpg
http://i1142.photobucket.com/albums/...psdcc76711.jpg
put in new directional housings. and panel filler decalhttp://i1301.photobucket.com/albums/...psb14ba02d.jpghttp://i1301.photobucket.com/albums/...ps824c409d.jpg
Found this on the driver side, put new one in and still leaks like a MOFO. New headers coming up
http://i265.photobucket.com/albums/i...617_192250.jpg
http://i265.photobucket.com/albums/i...617_192302.jpg
Damn, what headers are you running?
I was told by the previous owner that they are eBay headersQuote:
Originally Posted by tatertot91
My obx haven't done that with the paperish gasket. Those must get really hot.Quote:
Originally Posted by silverWS6I was told by the previous owner that they are eBay headersQuote:
Originally Posted by tatertot91
Got it inspected and tags renewed. Legal on the road for the first time in a year.
Also found out my 2 of my driver side passenger wheel lugnuts were not tightened down all the way and one was stripped. Sounded like the rear tire/wheel was going to come apart on the road. Took it to discount tire a week ago to rotate and balance the wheels. Glad to see their work standards are so high.
^^ That would seriously piss me off. There is a very limited list of people on this planet that are allowed to go anywhere near my cars with a tool in their hand. Were you able to get the stripped one off?
Yeah it came off with just pulling it with my fingers. How it didnt fly off at any point I dont know.
I had a shop once that didn't tighten my wheels on enough and one fell off while they were moving it....I still have the bent studs from it. It was in the back so I will be replacing them with Moser longer studs.
On another note I picked up some ws6 wheels I am going to use as racing wheels. I am going to attempt to get them to fit over my brembos, I have seen it done. By just measuring it looks like they may fit with little grinding.
same thing happen to me, I caught it a mile down the road. Turned around and made them fix it. Got lucky because I was fixing to get on the interstate.Quote:
Originally Posted by raynor139
so from that point on I always carry a lug wrench in the cars, and check in their parking lot.
