could you make a list of what you do have?
Printable View
could you make a list of what you do have?
I still have both doors, the engine, aluminum driveshaft, rear end with 3.73 gears, BBK 85mm intake manifold, NGK Iridium plugs, MSD 8.5mm plug wires, both doors, an unused (ever) passenger side quarterpanel, passenger side fender, the rear hatch, the formula hood, various suspension parts including the rotors (rusted but still good) and calipers, control arms, ect. And I still have a few various plastic parts around. I still have both airbags too if anyone needs those. I also still have the stereo available.
If you need anything let me know. I might have it laying around. The unibody of the car is gone. So all that I have are parts from her. And eventually I will get the title too.
I leave on the first so if anyone needs anything you need to let me know now.
did you ever sell those caliper brackets? those are the pices that bolt to the spindle and the caliper bolts to. I only really need the passenger side but if you need to sell them as a set thats cool, how much to ship to 28115?
Quote:
Originally Posted by LS1buckey
Are you talking about the part where the caliper bolts onto. The part where you pull out the 2 bolts from the caliper. Or is it a part of the caliper itself? Im just trying to get a picture in my head exactly what you need.
It's the part the caliper bolts to It's not one pice with the calliper.Quote:
Originally Posted by jwindbigler
Oh yeah. I still have that part. This is what you need right?Quote:
Originally Posted by LS1buckey
http://i126.photobucket.com/albums/p...r/PICT0017.jpg
If it is, then I want $35 for it. However shipping is going to be expensive as hell. Due to the fact that its made of iron. So its really really heavy. So I am going to want $60 for shipping. It sucks but they rip you off when you arent a frequent shipper or ship by the truckload.
how much for the rear hatch and wing??? it would have to be shiped.
No that's the steering knuckle the part I need is/was bolted to those to front (in the pic) bolt holes.Quote:
Originally Posted by jwindbiglerOh yeah. I still have that part. This is what you need right?
If it is, then I want $35 for it. However shipping is going to be expensive as hell. Due to the fact that its made of iron. So its really really heavy. So I am going to want $60 for shipping. It sucks but they rip you off when you arent a frequent shipper or ship by the truckload.
Quote:
Originally Posted by 99formulals1
I have already tried this to florida. Shipping there was going to be at least $550. And I want $400 for the hatch and wing. If thats cool with you great, if not man Im sorry about the shipping charges. I want to get rid of the thing, but shipping will cost way too much for my likings.
So you need the wheel hub?? Because the only thing that bolts to those is the upper and lower control arms with steering linkages, the caliper itself and the hub. Sorry for making this so hard, but can you send me a pic of exatly what you need.
thanks man i could do the $400 but the $550 shiping is crazy, ill try to find one closer hope you get rid of it anyways.
I would love to send this to you, but like I said UPS 1uoted me at $550 to FL. I mean I could probably find a box and get some bubble wrap and send it to you for like $250, but it wont be insured or anything. So if the glass came broken or it came bent, we couldnt do anything about it. Believe you and me I really want to get rid of it, but I cant seem to ship the darn thing.Quote:
Originally Posted by 99formulals1
The control arm bolts to the bolt holes at the top and bottom (I am going by the way it's sitting in your pic) the two bigger holes in front of where the wheel hub bolts is where the caliper bracket went. it's the part that the caliper went with it had two slide pins with two small bolts holding the caliper on to the whole assembly.Quote:
Originally Posted by jwindbigler
OK. I think that I got it. However I dont really want to part out the caliper assesmbly. But I will sell you the whole caliper for $50 and another $50 for shipping. Basically what you would get is a working caliper. No hydraulic lines or anything. If this sounds OK, let me know.Quote:
Originally Posted by LS1buckey
Na that's cool man I already have new calipers just need the one bracket but thanks anyway, sorry your car had to come to this it was a badass looking ride.Quote:
Originally Posted by jwindbigler
Yeah me too man. Oh well. I plan on getting a corvette engine and getting a kit car and build around it.
I need all the accessories with brackets and bolts from the engine if you still have them? If you are willing I need the entire uncut wiring harness too. Let me know how much shipped to 84414. thanks
All that I have left is an alternator as far as accessories go. No harness. Sorry bud.
