I recommend this mod if you have longtubes and the y pipe is banging on the floor.
Printable View
I recommend this mod if you have longtubes and the y pipe is banging on the floor.
Can you Feel alot of vibration after install? Im intrested in this as well however I dont want it shaking the crap out of me lol.
Poly motormounts and stock rubber tranny mount and no vibration .There is no shaking the motor moves very little. The stock rubber shake alot
+1Quote:
Originally Posted by Pete Rock98
I did the tranny as well initally. GOD DAMN lol the shake in Drive was INSANE.. Thought I lost the drive shaft first run I made. Put in a new OEM one and Almost normal again
anyone got a link to these prothane motor mounts? where can i buy these from? so what about the tranny mount? should it be upgraded to poly urethane or just leave the stock tranny mount alone?
Google is your friend..Quote:
Originally Posted by emoFTW
There are lots of places selling these
http://www.jegs.com/vs/Prothane/311
Summit racing fast shipping .
http://store.summitracing.com/partde...5&autoview=sku
I went with the black ones the red colored mounts were 11 bucks more .I guess for the dye they add.
i put the motor and trans mounts in and had some vibration. it gradualy got better as i drove it.
I hear it's a real pain in the ass to swap the motor mounts....is it really worthwhile? My y-pipe bangs and I'd like to fix the problem which is why I'm asking.
i have the tranny mount . got a lil vibration but not too bad...
over all i`ll take a lil vibration over felling like the trannys gonna come thou the floor.
I drilled out the the rivets and installed the the poly's into the clamshell that took me 2 hours.I had a shop put them on it took them almost 3 hours.Quote:
Originally Posted by Johns00Z28
i have poly motor and trans mounts... there is very little shake... if you guys think this is bad don't ever cam your car...
I have a small cam. The shake at idle is NOTHING like the earth ending vibration I got at WOT in third with the poly trans mount. Knocked my freaking coffee cup out of the secondary holder by the glove box..
I happen to like the shake at idle. Having my kidneys re-aligned at 80 mph, not so much.
sounds like it wasn't installed right then or else your motor mounts were shot... mine hardly vibrates at all...Quote:
Originally Posted by 01T-TopToy
I heard that the trans mount makes it more likely to snap your trans tail shaft
i doubt it...Quote:
Originally Posted by DIRTY JERZY
Oh I probably should have said that was on cars that kept the stock motor mounts
I have the spohn body mounted tq arm, I was told a tranny mounted tq is what brakes the tail shaft at the track with good vht lol
maybe a stock tq arm... i know i snapped mine in half... :lol:Quote:
Originally Posted by Pete Rock98
I'm running mid 10's on the stock 130k miles motor and tranny mounts. I have a set of poly mounts sitting in the garage (I've had them for 6+ months).