Cold fusion nitrous fuel cell

Printable View

06-19-2007, 03:16 PM
Nasty TA

Cold fusion nitrous fuel cell

Has anyone used the cold fusion nitrous fuel cell kit that mounts up font in the engine compartment. If so can you post some pics and if it it worth 512.00 or not. Planing on buying one and need some feedback. Thanks

http://www.coldfusionnitrous.com/ima...uel-kit_lg.jpg
06-20-2007, 01:07 PM
Eagle

I think you might be looking at the wrong thing... thats a fuel system... not a nitrous setup...

http://www.nitrouspowered.com/Fuel-Systems-s/95.htm
06-20-2007, 09:23 PM
Nasty TA

I know its not a nitrous setup. You showed me the exact same thing. It is the fuel cell, pump and regualtor for a wet nitrous kit for a stand alone fuel supply for an wet nitorus kit. I just want to know if anyone has used it and if so i would like to see how its mounted. They say that it fits without removing anything in the engine compartment and it mounts on the driver side. I want the set up so i can run 100 unleaded race gas when i spray.
06-21-2007, 05:42 AM
Eagle

It just seems a bit over the top... seeing as the rating is for spraying 1000HP multi stage nitrous setups...
06-21-2007, 08:00 AM
gen3ls1

Quote:

Originally Posted by Eagle

It just seems a bit over the top... seeing as the rating is for spraying 1000HP multi stage nitrous setups...

i think it's a great idea...it's always good to have a stand alone system so you don't have to depend on your fuel sysytem to run your car and your nitrous
06-21-2007, 09:14 AM
Nasty TA

Quote:

Originally Posted by gen3ls1

i think it's a great idea...it's always good to have a stand alone system so you don't have to depend on your fuel sysytem to run your car and your nitrous

I also agree that why i want ot get it. Even though i already have a walbro 255 pump, i don't want to put that much strain on it because i'm spraying a 200 shot on it on a built forged motor. My friend saw a guy runnig this set up with a 200 shot run in the high 9's on the same set up as i have so it will be worth it in my opinion. Plus that just one more polished piece for under the hood.
06-29-2007, 02:39 PM
Rocketwheels

I was thinking about buying that, I got my current system from NitrousDirect.com they were very helpful and gave me the bets price, I don't know anything about the fuel systems though, i need help in that department too
06-29-2007, 04:18 PM
D!ck

I got my wet kit from Cold Fusion Nitrous Systems. :zoom:

http://www.coldfusionnitrous.com/

wish i still had the guys cell# I'd hook up with Mick, he's the Man!!
07-07-2007, 03:08 PM
LS2Tuner

That is pretty expensive....I think
All it is is a gallon fuel cell you can get on Ebay for $115. A "cheap" Holley style fuel pump thats louder than a diesel truck.... A $120 from Summit with the regulator. A few fittings......$50-60. A generic Bosch style relay $5,Relay pigtail $2 A few butt connectors....$4.3 pre-made lines at $20-$30 each.
Not to mention the fittings in the pic don't make sense. Your goal in plumbing ANY fuel system is to stay away from 90's they are restrictions...EVERY FITTING IS A 90 EVERY WHERE!!! NOT TO MENTION THEY ARE THE MOST EXPENSIVE.
Then there is a 3/8" npt -6 90 fitting on the regulator and then it has a female cap on it....... Just put a 3/8"npt plug in the regulator.
Anyways there is some knowledgeable feed back for you.
07-12-2007, 01:18 PM
TNTramair

another option for you....fits a little cleaner and the welds look much better too. :). its worth the price differance.
http://www.harrisspeedworks.com/shop...p?imageid=1185

http://www.harrisspeedworks.com/gall...ormal_R-02.jpg

link to more info...

http://www.harrisspeedworks.com/shop/home.php?cat=373