Can you fit 18x10's on the front of an 02 WS6?Tire size would be like 275/35R18. If not how wide can I go on the front?
Printable View
Can you fit 18x10's on the front of an 02 WS6?Tire size would be like 275/35R18. If not how wide can I go on the front?
In my opinion...17's.
A little work can make 315's fit on a 17" wheel.
You can fit 20" wheels on these cars...but they don't look right to me.
yes. get with Eugenio SS about it.
I'm wanting the Dale Jr Killer rims from American Racing. You can get 18x8.5 for the front and 18x10 for the rear but I hate that staggered look and the fact it makes it near impossible to rotate your tires.
+1 .....you can rotate!
Eugenio can you post some pics of your car to show how the wheels look in the fenders and a rear shot. i want my rears to fill the fenders like the fronts. i don't like the way the fender and tire aren't even.(rear) for example my rear tire is about an inch or so inside the wheel well in the back. before i get new rims i would like to see yours. thanks
http://community.webshots.com/album/78350444Ciumpg
the link is in my signature... this is w/ 17x11 on all corners.
thanks dude those are sick!:thumbup:
my freind is going to sell me his 18x10.5's for $300
so i hope mine looks as good as yours!:notworthy:
theres no issues with turning radius with 18x10s on the car as long as you get the right offset?
Might need a spacer depending on the offset like Eugenio said.
:Ot:[hyjack] How are the mods going Eugenio?
I am in the in the process of creating a write up c/w pictures as I go along on installing seats (purchased Sparco's here in this site) as well as a bolt in roll bar c/w harnesses.
Just wondering you have been doing with all the parts you had to install this winter? Are we going to see some pictures from you soon? [/hyjack]
been quite busy and am now in process of improving a bit more my brakes ;) and sound system... meanwhile, haven't touched the Recaro project... wanted to test fit so i could do custom brackets this week-end... but too busy :(
oh well next week-end.
Plus, i'm getting a 9,000lbs lift installed soon... so with that, should be easier... here's a link on the model and where i'm getting it from:
http://www.liftsuperstore.com/web/bi...port/index.php
... back to our scheduled thread discussion ...