Printable View
:wwf: 2000 SS ... The rear right turn signal doesnt work. The light on the dash stays solid when turned on. The right front works, but doesnt blink... The left hand signals all work, when you put the 4 way flashers on, they all flash minus the right rear signal... Ive pulled the bulb and tested it, it's good... I put a test light on the socket and it's getting power but only one solid current, no flash... Any ideas?
This happens when the bulb is burned out.Quote:
Originally Posted by Whiteboycntdnce
I know normaly thats the case, but the bulb is fine, I even took it out of that socket and put it in the left rear socket and it worked fine
try bending the metal tabs out on the bulb. I had the same problem, the bulb just was'nt making contact with the socket.
Just go to kragen, autozone or where ever and just buy a new bulb. They're only like $5-$10 bucks. If problem is not resolved just return bulb. Then you'll know for sure it's not the bulb. Ha, ha.
Ah Y2KPewterss, This is a little off topic but where did you get your burger panel? Or did you just paint the original?
Heres your problem. Try this http://kalecoauto.com/index.php?main...&products_id=6 LOL:lmao:
Bad bulb, Needs a better connetion, or Chase the wires:dunno: