Fresh Gtp Heads, And Fresh Complete 408 For Sale!!!!!!
1.)
LS1 STG 2 Ported by Craig @ GTP in Houston, The car was running 9.6's on the 347 and spray – Crain dual springs, ti retainers, 61.5 cc. They are milled 30 thousandths. I just spent $400 on having them freshened.
EDIT: NEW PRICE!! $1375
http://photobucket.com/albums/b15/GS..._/GTP%20Heads/
2.) 408 block for sale!
This motor is COMPLETELY FRESH!! It was professionally assembled. The heads have roughly 300 miles since the valvejob. The rotating assembly was balanced, and it has brand new bearings and rings that were installed.
408 ironblock 10.5:1 compression (with the heads that are on it)
Stage 2 p&p heads 2.02/1.57 valves 4.8/5.3 heads (they are the same..) 65.8 cc (will provide flow sheet from SF600 test)
Comp "R" lifters.
Comp 7.4 hardened pushrods
Lunati 244/252 .624/.629 112 lobe separation
Clevite main and rod bearings
4” crank Eagle
Crower Rods
JE reverse dome 16cc pistons
It will have ALL of the pans and covers. No sensors, crank pulley, or intake though. No dyno time or 1/4 mile passes. This motor is fresh, and has not been run since the new bearings, rings, etc..
EDIT: NEW PRICE!! $4950
