Alt wiring

Hey guys,
It's been awhile since i posted i need to get back onto the LS1.com train lol
so after my motor swap, i was told during the tune that i had an alternator code. but it doesn't give me a dumb dumb light.
it charges fine and i don't know why its throwing a code.. does anyone have a diagram of how the wires go. i thought i had them back together the right way.. i did have to remove all the ground straps from the harness to get it out of the way. and again i thought i had them all back in the right spot, however that might not be the problem. its a new alternator. there was nothing wrong with the old one i just didn't want a beat ass ALT on my new motor,

Bump

do you have all your ground wires hooked up

Check you wire that connects to the alt to the engine. Ita called the excite wire. Make aure its pluged in your alt ALL the way

i know i didn't leave any of the grounds off, i made sure of that. when i get a chance i will double check all the wires on the Alt. does anyone have a diagram that would show the wiring?

The back of any Haynes or Chilton manual should have them.