loosing my cool.

Having trouble with cooling fan circut on 1998 ws6. Can any one tell me what all must be hooked up besides the cooling sensor to tell the computer to ground relays 1&2 to activate the fans? I can manualy ground wires in connector C-100 and they will run. Any ideas???

The temp sensor on the head by the # 1 spark plug needs to be plugged in and working. Is the temp gauge working in the dash ? The ECM runs the relays... I think the stock programming is around 188* on the first fan & 195* on the second... The AC should also kick on the fans...

Thanks for the call and info Bill. You were a huge help.

Here's a link for Frost...
http://www.tunedbyfrost.com/

Quote:

---

Originally Posted by waterman74

Ok, Iam a dumb okie. just read the do not post artical. If what I have done is so bad ,please delete and I will promice to NEVER use this site again. I am sorry!!!

Having trouble with cooling fan circut on 1998 ws6. Can any one tell me what all must be hooked up besides the cooling sensor to tell the computer to ground relays 1&2 to activate the fans? I can manualy ground wires in connector C-100 and they will run. Any ideas???

---

You only have (2) posts what could you have done wrong, and why would anyone want to delete you?

I don't see a problem with the question..:dunno:

Unless of course this is a troll account..:slap:

Mods would deffinetly frown on that..;)